Coleman 5010000286 Installation guide

TO REMOVE OLD BURNERS

1. Open lid, remove grate and heat tents.

2. Remove the hold-down screw on the left side of each burner (Fig. 1).

3. Pull burner to the left about 2” to expose the electrode connection.

4. Slide the flexible wire cover to expose the wire connection (Fig. 2).

5. Disconnect the old burner electrode wire.

TO INST

ALL NEW BURNERS

6. Reconnect the new burner electrode wire.

7. Slide the flexible wire cover over the wire connection.

8. Push the burner tube over the orifice on the right side (Fig. 3).

9. Replace the hold-down screw on the left side, securing both the

burner tube and the heat tent bracket. Repeat for the other burner.

10. Replace the heat tents and the grate.

Burner Replacement Instructions for Coleman

Shoreside™ Propane Grill

9971 Series

Part No. 5010000286

The Coleman Company, Inc. • 3600 N. Hydraulic • Wichita, KS 67219 U.S.A. • 1-800-835-3278 • TDD: 316-832-8707

, , and are registered trademarks of The Coleman Company, Inc.

www.coleman.com

4010001961 (20080212)

FLEXIBLE WIRE COVER

Fig. 1

Fig. 2

WIRE CONNECTION

Fig. 3

ORIFICE