Mobridge Gateway User manual
- Category
- Gateways/controllers
- Type
- User manual
Bluetooth Gateway for Volkswagen
User Manual
2010 Fiberdyne Systems Pty Ltd
Welcome
Congratulations on purchasing a mObridge
Bluetooth Gateway for your VW. The mObridge
Bluetooth Gateway allows for full hands-free
phone control using the existing radio and
steering wheel controls in your VW vehicle.
30%#)!,,9$%3)'.%$ ),,5342!4)/.3
!NALPHABETICALINDEX
CANBEFOUNDATTHE
ENDOFTHEGUIDE
).$%8
-/"2)$'%-!.5!,
4HEBOOKLETISDESIGNEDTOFITINTOYOUR
6OLKSWAGEN´S5SER-ANUALFOLDER
7ERECOMMENDADDINGTHISBOOKLET
TOYOUR6OLKSWAGEN5SER-ANUAL
FOLDERFORFURTHERREFERENCE
3OMEILLUSTRATIONSMAY
VARYFROMYOURVEHICLE
9OU SHOULD THEREFORE
REGARDILLUSTRATIONSAS
AGENERALGUIDE
).34!,,!4)/.
2EFERTOTHESEPARATE
M/BRIDGE"LUETOOTHFOR
6OLKSWAGEN)NSTALLATION
DOCUMENTFORINSTALLATION
INSTRUCTIONS
!DDTHEMOBRIDGEMANUAL
TOYOUR6OLKSWAGEN5SER
-ANUAL&OLDER
About this Manual
This manual contains important information and warnings on
using your mObridge Bluetooth for Volkswagen. Please read
this manual carefully to insure you are using the mObridge
kit correctly and utilising its many features.
Contents
Getting Started
04
Getting Started 04
Supported Equipment 04
Features 05
Steering wheel controls 06
Stalk Controls 07
RNS-510 and RCD-510 08
Base Model Radios 08
Pairing your Bluetooth Phone
08
Connecting & Disconnecting the Phone 08
Voice Recognition 09
Operation: Combi-instrument Display
10
Menu Structure 10
Making a phone call from the phonebook
11
Dialing a telephone number 12
Accepting an incoming call 13
Rejecting an incoming call 13
Ending a telephone call 13
Sending DTMF tones 14
Call Lists 14
SMS 15
Bluetooth Device Control 16
Changing System Settings 16
Operation: RNS-510 and RCD-510
17
Making a phone call from the phonebook 17
Dialing a telephone number 17
Accepting an incoming call 18
Rejecting an incoming call 18
Ending a telephone call 18
Call Lists 18
Software Updates
19
Troubleshooting
19
Warranty
20
Index
20
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
GETTING STARTED
04
Supported Equipment
Getting Started
The mObridge Bluetooth kit supports
the following equipment:
MFA+ (White) with multi-function
steering wheel
The white MFA+ has been introduced with
the new Golf VI and Passat CC. mObridge
Bluetooth for Volkswagen is fully compatible
with this system.
MFA+ (Color) with multi-function
steering wheel
The Touareg features a wider color cluster
display. mObridge Bluetooth for Volkswagen
is fully compatible with this system. Note
that the Touareg steering wheel features a
scroll wheel rather than individual up/down
buttons, however the operation is the same.
MFA+ (Red) with multi function steering wheel
The Red MFA+ is being phased out in favor
of the White MFA+, however mObridge
Bluetooth is fully compatible with this system.
RNS-510 / RCD-510
Both of these touch-screen head-units provide
telephone functionality.
Vehicles without any of the above
It is possible to install a mObridge Bluetooth
without any of the above equipment. In this
case the mObridge Bluetooth will perform
like a basic hands-free system, with call
answer and hang-up using the stalk control,
and the ability to launch the voice-recognition
function of your phone.
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
GETTING STARTED 05
Features
The accessible mObridge features will differ depending on the equipment specication of your
vehicle. In a fully equipped Volkswagen, with MFA+ and RNS-510/RCD-510, all mObridge features
are available. In a base-model Volkswagen, only the basic hands-free features are accessible.
The following table shows the accessible phone features in your vehicle.
Features
MFA+ RNS-510/RCD-510 LowlineMFAwith
StalkController
Full hands-free audio
with on-board DSP
Dial Numbers
Access your phone book
Answer Incoming Calls
Reject Incoming Calls
Hangup calls
Modify phone book Yes Yes No
numbers before dialing
SMS
Launch phone’s
voice recognition
The mObridge Bluetooth kit can be controlled via the steering wheel controls in your vehicle.
An example of the steering wheel controls is found in the diagram below. Your controls may
differ slightly from shown, but the basic operation will remain the same. Using the steering wheel
controls, the telephone functionality is displayed on the MFA+ in the combi-instrument display.
Steering Wheel Controls
Applies to vehicles: with multi-function steering wheel and MFA+ in the combi-instrument.
,%&43)$%#/.42/,3 2)'(43)$%#/.42/,3
0REVIOUS-ENU
/+"UTTON
"ACK"UTTON
6OLUME5P
6OLUME$OWN
$IAL !NSWER (ANGUP
.EXT-ENU
-ENU3CROLL$OWN
-ENU3CROLL5P
3TEERING7HEEL"UTTONS &)'
NOTES Steering wheel controls and vehicle display
may differ between Volkswagen models. This may
change the operation slightly of the mObridge
Bluetooth kit between vehicles.
Some steering wheels have a back button
which can be used to quickly go back to the previous
menu. If your steering wheel does not have a back
button you can still go back to the previous menu
using the <<Back menu option or a long-press of
the OK button.
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
GETTING STARTED
06
The mObridge Bluetooth kit can be controlled via the stalk controls in your vehicle (if equipped).
Stalk Controls
Applies to vehicles: with stalk controls
3TALK#ONTROL"UTTONS &)'
HIGH
LOW
OK/RESET
OFF OFF
T
R
I
P
50$/7.#/.42/,/+"544/.
Stalk Controls with MFA+
With an MFA+, the stalk controls allow the user to navigate the Telephone menu.
Press UP/DOWN to navigate the menu.
Pressing the OK button will enter a menu option.
Holding the OK button will go back out of a menu.
Exiting telephone mode can be achieved by holding UP.
Stalk Controls with lowline MFA
If you have a lowline MFA, then a double-click of the OK button is used to answer calls,
end calls, and launch the phone’s voice recognition.
When a call is ringing, double-click the OK button to answer it.
When a call is in progress, double-click the OK button to end it.
When no call is active, double-click the OK button to start your phone’s Voice
Recognition – provided your phone supports this option – refer to pg 09
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
GETTING STARTED 07
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
PAIRING YOUR BLUETOOTH PHONE
08
Pairing your Bluetooth Phone
Applies to vehicles: All
To pair your Bluetooth phone with the
mObridge Bluetooth kit, you will need to
do the following:
01 Turn ignition on.
02 Using the Bluetooth features of your
phone, perform a search for new devices.
03 Your Bluetooth phone should nd a device
named “CAR BT”. Connect to this device.
04 When prompted for a passkey, enter 1234
which is the default passkey.
05 Your phone should now connect to
the mObridge kit where it can then be
accessed using the steering wheel or
the radio controls.
NOTES
Please consult your phone’s user manual if you
have trouble searching for the mObridge device
from your phone.
A maximum of 5 Bluetooth devices can be paired
with mObridge Bluetooth at any time. If a 6th
device is paired with the system, the least used
pairing will be deleted from the mObridge Bluetooth.
For some phones, you must manually allow the
phonebook synchronization to occur, by pressing
on the phone.
RNS-510 & RCD-510
Applies to vehicles: with RNS-510 or RCD-510
touch-screen head-units.
In case the vehicle is also equipped with
the RNS-510 or RCD-510 head units, then
telephone functionality is also available
via the “PHONE” menu on these devices.
The functionality provided by mObridge is
identical to the factory telephone for the
RNS-510 and RCD-510. You can refer to the
respective user manual for your RNS-510 or
RCD-510 for further information.
Base Model Radios
Applies to vehicles: without RNS-510 or RCD-510
touch-screen head-units.
Volkswagen base-model radios (i.e. those
without a touch-screen display) are not
capable of controlling the telephone. In this
case the telephone must be operated only
using the display on the MFA+.
During an active call, the radio will display
the text “PHONE” and the volume controls on
the radio will change the volume of the call.
Phone Not Connected Display
When no phone is connected
to the system, this will be
indicated on both the MFA+
and also the RNS-510/RCD
-510 if equipped.
&)'
2.32#$$ISPLAY-&!$ISPLAY
RADIO
MEDIA
PHONE
TIM
TP
SET UP
Mobile telephone not
inserted or connected.
No user connected.
for Devices...
Bluetooth
System
Searching
PHONE
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
PAIRING YOUR BLUETOOTH PHONE 09
Phone Connected Display
When a phone is connected,
both the MFA+ and RNS-510/
RCD-510 will display the
current phone name, signal
strength, and network
name – provided your phone
supports the sending of
this information over
Bluetooth.
My Phone
Network Provider
PHONE
-&!$ISPLAY &)'
2.32#$$ISPLAY
RADIO
MEDIA
PHONE
TIM
TP
SET UP
Switch off
microphone
My Phone
Network Provider
Memory 1
Memory 3
Memory 5
Memory 2
Memory 4
Memory 6
SOS
Call List
Now that the phone has been paired to
the system, it will connect and disconnect
automatically when ignition is turned on/off.
When the key is inserted and ignition is on,
mObridge will begin searching for all paired
devices, beginning with the most recent one
connected. It will do this until a connection
has been made. When ignition is switched
off and the key is removed, mObridge will
disconnect from any connected phone. If a
call is ongoing at this time it will transfer to
private mode on the handset.
NOTES
Some phones do not support automatic
connection – for these phones you will need to
manually connect to mObridge using the controls
on your phone.
Automatic connection & Disconnection
If your phone has a voice recognition function,
and your phone supports this functionality
over Bluetooth, it is possible to launch
your phone’s voice recognition via the
vehicle controls.
Note that not all phones support this
functionality. Consult the manufacturer
of your phone for more information.
Voice Recognition
To launch the voice recognition of your phone:
01 Ensure that a phone that supports
this functionality is connected to the
mObridge device.
02 On vehicles equipped with steering wheel
controls, a long press of the button
when not in a call will launch the voice
recognition.
03 On vehicles equipped with the stalk
control, a double-click of the OK button
when not in a call will launch the voice
recognition.
VOperation: Combi-instrument Display
Applies to vehicles: with MFA+ in the combi-instrument
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
OPERATION: COMBI-INSTRUMENT DISPLAY
10
Menu Structure
Applies to vehicles: with MFA+ in the combi-instrument.
Main Menu
The following menus are available in the Telephone menu on the combi-instrument.
When a phone is connected the entire menu is available.
Phonebook Display the phonebook See page 9
Dialed List Display the last dialed numbers call list See page 12
Received List Display the last received calls list See page 12
Missed List Display the missed calls list See page 12
Dial Number Dial a phone number See page 10
SMS Display SMS messages See page 13
Bluetooth Access Bluetooth settings See page 14
System | Version Displays product version information.
System | Factory Reset Reset mObridge Bluetooth to factory defaults.
System | Settings Change System Settings See page 14
When no phone is connected, only the System and Settings menus are available.
-AIN-ENU &)'
Phonebook
Dialed List
Received List
PHONE
Main Menu
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
OPERATION: COMBI-INSTRUMENT DISPLAY
11
It is possible to dial a number from the
phonebook of the connected phone using
the steering wheel buttons.
NOTES
Your Bluetooth phone must support phonebook
sync to use this feature.
It may take a few minutes for your phonebook
to be available after connecting your phone,
depending on the size of your phonebook.
0HONEBOOK-ENU &)'
<<
Back
Appleseed, J...
Citizen, John
PHONE
Phonebook
Making a telephone call from the phonebook
Applies to vehicles: with MFA+ in the combi-instrument
01 Enter Telephone Menu on the MFA+ using
the and buttons on the steering
wheel.
02 Press to enter the telephone menu.
03 Using the button scroll down to
Phonebook. The phonebook menu will
appear. (see gure 06)
04 Press to select the phonebook entry
you wish to dial.
05 If there is more than one phone number
associated with this entry, select the
number you wish to dial using the
and buttons.
06
Press the button or the button to dial.
TIPS
If you have a large phonebook, you can scroll
through it quickly by holding down the or
buttons. This will skip through the phonebook
by rst letter.
You can edit a phone number before dialing by
selecting the “Edit and Dial” option before dialing.
The system will synchronize up to 1000 entries
from your phonebook. Each entry can have 4
phone numbers assigned to it.
It is possible to dial any number from both
the steering wheel and RNS-510/RCD-510
if equipped.
Dialing a number using the steering
wheel controls
$IAL.UMBER-ENU &)'
333
[ 3]
[ 4]
Dial Number
PHONE
Dialing a telephone number
Applies to vehicles: with MFA+ in the combi-instrument.
01 Enter Telephone Menu on the MFA+ using
the and buttons on the steering
wheel.
02 Press to enter the telephone menu.
03 Using the button scroll down and
select the Dial Number menu using
the button.
04 Using the and buttons on the
steering wheel, select numbers you wish
to add to the phone number to dial by
pressing the button. Select the [DEL]
menu entry to delete the last number.
05
Select the [DIAL] menu entry using the
button, or press the button to dial
the number.
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
OPERATION: COMBI-INSTRUMENT DISPLAY
12
)NCOMING#ALL3CREEN &)'
0415551234
Answer
PHONE
Incoming
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
OPERATION: COMBI-INSTRUMENT DISPLAY
13
An incoming call will cause the radio to mute
and a ring tone to be audible. An incoming
call display will be displayed.
Option 01
An incoming call can be accepted by a short
press on the button on the steering wheel.
Option 02
An incoming call can be accepted by selecting
the Answer option from the incoming call
screen that is displayed on the MFA+.
Accepting
an incoming call
Applies to vehicles: with MFA+ in the
combi-instrument.
An incoming call can also be rejected. It
depends on your network provider as to what
this does, but usually the caller will go straight
to your voice mail.
Option 01
An incoming call can be rejected by a long
press (3 seconds) on the button on the
steering wheel.
Option 02
An incoming call can be rejected by selecting
the Reject option from the incoming call
screen that is displayed on the MFA+.
Rejecting
an incoming call
Applies to vehicles: with MFA+ in the
combi-instrument.
Briey press the button on the steering
wheel.
Ending a telephone call
Applies to vehicles: with MFA+ in the
combi-instrument.
Pressing the number keys during a phone
call can be used to send DTMF tones. DTMF
Tones can be used to navigate Call Centre
and voicemail menus for example.
Sending DTMF tones using the steering
wheel controls:
01 When in a call, use the and buttons
on the steering wheel to display the active
call screen.
02 Use the and buttons to select the
Send DTMF menu, and press the button
to select it and enter the DTMF menu.
03 Within the DTMF menu, use the an
buttons on the steering wheel to
select numbers to send. When you are
done, you can use the <<Back menu option
to return to the previous screen.
Sending DTMF tones
Applies to vehicles: with MFA+ in the
combi-instrument.
mObridge will synchronize the Last Dialed,
Missed, and Answered Call lists with your
phone. If a number is known from your
phonebook, then the caller name will be
displayed in addition to the number.
Dialing a number from a Call List using
the steering wheel controls
01 Enter Telephone Menu on the MFA+ using
the and buttons on the steering
wheel.
02 Press to enter the telephone menu.
03 Using the button scroll down to Last
Dialed, Missed Calls, or Answered Calls
options, and press the button to select.
04 Use the button or the button to dial
NOTES
Not all phones support the synchronization of
call lists over Bluetooth. For phones that do
not support this feature, only calls made while
the phone is connected to the vehicle will be
contained in the call lists.
Call Lists
Applies to vehicles: with MFA+ in the
combi-instrument.
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
OPERATION: COMBI-INSTRUMENT DISPLAY
14
mObridge supports basic SMS functionality
such as Reading and Deleting. New SMS
messages will be agged to the user.
SMS messages can only be accessed on the
MFA+ using the steering wheel controls –
the RNS-510 and RCD-510 do not have this
functionality.
Accessing the SMS menu
To enter the SMS menu on the MFA+:
01 Use the and/or buttons on the
steering wheel to enter the telephone
menu.
02
Press to enter the main telephone menu.
03 Press the button to scroll to SMS and
use the button to enter the SMS menu.
3-3-ENU &)'
Tina
Scotty
John
PHONE
SMS
SMS
Applies to vehicles: with MFA+ in the combi-instrument.
NOTES
Not all phones support SMS over Bluetooth. For
phones that do not support this feature, this
functionality will not be available.
Extended SMS (greater than 160 characters) are
not fully supported, and will appear as multiple
SMS messages in the list.
Reading SMS
Use the and buttons on the steering
wheel, together with the button to select
the SMS you would like to read.
When viewing SMS messages, press to
access available options to delete the message,
place a call to the sender, or return to the
previous menu.
Unread SMS messages that are viewed are
marked as read on the phone.
Deleting SMS messages
Press while viewing an SMS message, and
select Delete from the popup menu. You
will be asked to conrm before deletion.
Placing a call to the sender
Press while viewing an SMS message,
and select Place Call from the popup menu.
Alternatively, press the [DIAL] button on the
steering wheel.
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
OPERATION: COMBI-INSTRUMENT DISPLAY
15
The MFA+ provides a Bluetooth menu that
allows for the control of Bluetooth devices
that the mObridge is paired with. You can
view the list of devices and delete individual
devices from the device list.
Accessing the Bluetooth Menu using the
steering wheel controls.
01 Use the and/or buttons on the
steering wheel to enter the telephone
menu.
02 If the phone is connected, you will need
to press the button to access the main
phone menu.
03 Use the button to scroll down and
select Bluetooth from the menu, and
select it with the button.
The Bluetooth menu shows a list of all
connected devices. Select a device and press
enter, and a sub-menu will appear with
various options.
Bluetooth Device Control
Applies to vehicles: with MFA+ in the
combi-instrument.
Deleting a Bluetooth Device
01 Access the Bluetooth menu using the
directions above.
02 Select a Bluetooth device, and use the
button to open the sub-menu.
03 Using the button, scroll down to Delete
to delete the device.
04 A conrmation screen will appear.
Select Delete again and the device will
be deleted.
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
OPERATION: COMBI-INSTRUMENT DISPLAY
16
Changing System Settings
Applies to vehicles: with MFA+ in the
combi-instrument.
It is possible to change some of the system
settings of the mObridge system. Settings
are available in the System->Settings menu
on the MFA+.
The settings can be changed even when no
phone is connected.
System Settings Options
Mic Gain 01 - 15
Controls the volume of the microphone
audio from the mObridge system.
Call Volume
01 - 15
Volume level during a call.
Ring Volume
01 - 15
Volume level of the internal ring.
This is used if your phone does not
send the ringtone via Bluetooth.
Beep Volume 01 - 15
Volume level of prompt beeps.
A2DP Volume 01 - 63
Volume level of ringtones if your
phone sends them via A2DP (not
all phones provide this functionality).
Language
Sets the operating language.
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
OPERATION: RNS-510 & RCD-510 17
Operation: RNS-510 & RCD-510
01 Touch the Phonebook function key on the
lower-right of the screen to show the
phonebook menu. See Figure 09
02 In the phonebook menu, move the slider
in the scrollbar down to display additional
entries, or use the [SEARCH] function
key to select entry by typing the first
few letters of the name.
03 Touch a phonebook entry to dial the
number associated with it.
2#$0HONEBOOK-ENU &)'
Telephone book
3 Business Suport
3 Care
abnegation cautiously
abnegation cautiously
abnegation cautiously
RADIO
MEDIA
PHONE
TIM
TP
SET UP
Search
Making a telephone call from the phonebook
Applies to vehicles: with RNS-510 or RCD-510 touch-screen head-units
01 Touch the Keypad function key on the
lower-left of the screen to display the
dial number popup menu. See Figure 10
02 Dial the number you wish to dial using
the keypad.
03 Touch the [CALL] function key to dial
the number
Dialing a telephone number
Applies to vehicles: with RNS-510 or RCD-510 touch-screen head-units
Memory 2
Memory 4
Memory 6
SOS
2#$$IAL.UMBER &)'
RADIO
MEDIA
PHONE
TIM
TP
SET UP
Switch off
microphone
Call List
2
ABC
3
DEF
1
ABC
5
JKL
6
MNO
4
GHI
8
TUV
9
WXYZ
7
PORS
0 #*
041955837
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
OPERATION: RNS-510 & RCD-510
18
01 Touch the [CALL LIST] function key at the
bottom of the telephone screen.
02 In the pop-up window that opens, select
the call list you would like to access.
03 In the call list, touch the number to dial it.
#ALL,ISTSONTHE2#$ &)'
RADIO
MEDIA
PHONE
TIM
TP
SET UP
Memory 1
Memory 3
Memory 5
Memory
Memory
Memory
Switch off
microphone
Missed calls
Dialed numbers
Incoming calls
Call List
My Phone
Network Provider
Call Lists
Applies to vehicles: with RNS-510 or RCD-510 touch-screen head-unitsits
Accepting an incoming call
Applies to vehicles: with RNS-510 or RCD-510 touch-screen head-units
Touch the green [DIAL/ANSWER] key to answer
the call.
Rejecting an incoming call
Applies to vehicles: with RNS-510 or RCD-510 touch-screen head-units
Touch the red [HANGUP] key to reject the call.
Ending a telephone call
Applies to vehicles: with RNS-510 or RCD-510 touch-screen head-units
Press the red [HANGUP] button.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Mobridge Gateway User manual
- Category
- Gateways/controllers
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
GROM Audio RCD STEREOS User manual
-
Volkswagen Passat 2006 Service Training
-
-
-
-
-
Geneva Lab XL User manual
-
-
-
