Notes
Required Electrical Service
Install this product according to the installation
instructions.
One circuit required.
120/240 V, 0.6 A, 50/60 Hz
Do not install this seat in a location where: (1)
water might be splashed on the product or (2)
Technical Information
All product dimensions are nominal.
excessive moisture, high humidity levels, or
ElongatedSeat shape type:
condensation is present. This will avoid damage
to the electronic components.
Closed-frontSeat front type:
Do not use an extension cord with this product.
5-1/2" (140 mm)Seat-mounting holes:
To avoid possible product malfunction, do not
plug in the seat until instructed to do so.
33 ft (0.8 m)Bluetooth® range:
4.2Bluetooth® version:
Locate the receptacle at least 6" (152 mm) above
the floor, and within a 32" (813 mm) radius
measured 2" (51 mm) from the bowl ledge.
60" (1524 mm)Power cord length:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-18-2019 03:22 - US/CA
PureWarmth
™
heated elongated toilet seat
K-10349