GB PROGRAMME CHART
E. Programme selector
F. “Start(Pause)” button
G. Spin speed selector
H. Programme sequence indicator
and Start delay indication
I. “Reset” button
J. “Start delay” button
A. “Door open” indication
This washing machine is equipped
with automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Programme
Care
Labels
Max.
Load
kg
Type of wash / Notes
- respect the manufacturer's recommendations on the care label
Detergents and Additives
Special options
Max.
Spin
Speed
rpm
Pre-
wash
Main
Wash
Softener Start
delay
Avvio
ritardato
Rapid
Rapido
Pre-
wash
Pre-
lavaggio
Intensive
risnse
Risciacquo
intensivo
Rinse
hold
Anti
piega
Spin
Centri-
fuga
variabile
Cotton
95°C
Cotone
95°C
6.0
Normally to heavily soiled and robust white cotton laundry. In case of heavy
soiling or stains, you can add an oxygenbased bleach additive which can be
used at 95°C. This programme eliminates bacteria, ensuring sanitization of
your laundry.
i
Yes
i i
–
i i i i
Max.
Cotton
60 - 40 °C
Cotone
60 - 40 °C
6.0
Normally to heavily soiled bed linen, table linen and underwear, towels,
shirts etc. made of cotton and linen.
i
Yes
i i i i i i i
Max.
Synthetics
30 - 40 - 60 °C
Sintetici
30 - 40 - 60 °C
3.0
Normally soiled garments made of artificial fibres (like polyester, polyacryl,
viscose etc.) or their blends with cotton.
i
Yes
i i i i i i i
Max.
Delicates
30 - 40 °C
Delicati
30 - 40 °C
1.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
i
Yes
i i
–
i
–
i i
1000
1)
Daily load
40 °C
40 °C
3.0
Slightly to normally soiled robust laundry made of cotton, linen, artificial
fibres and their blends. Effective one-hour programme. Make sure to wash only
similar colours together in one wash load.
–
Yes
i i
– –
i i i
Max.
Quick wash
30 °C
Rapido
30 °C
3.0
Shortly worn clothing made of cotton, polyester, polyamide and blends with
cotton. Brief programme to refresh your laundry.
–
Yes
i i
– – –
i i
Max.
Wool
Cold - 40 °C
Lana
a freddo - 40 °C
1.0
Only woollens, labelled with the Woolmark and identified as machine
washable.
–
Yes
i i
– – –
i i
1000
1)
Handwash
40 °C
Lavaggio a mano
40 °C
1.0
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
–
Yes
i i
– – –
i i
400
1)
Lingerie
30 °C
Lingerie
30 °C
1.0
This programme is particurarly suitable to treat delicate lingerie (use of
laundry net strongly recommended).
–
Yes
i i
– – –
i i
400
1)
Rinse & Spin
Risciacquo &
Centrifuga
– 6.0
Same as the last rinse and the final spin in the “Cotton” programme.
– –
i i
– –
i i i
Max.
Spin Centrifuga
– 6.0
Intensive spin. Same as the spin cycle in the “Cotton” programme.
– – –
i
– – – –
i
Max.
Gentle Spin Centrifuga breve
– 1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme.
– – –
i
– – – –
i
1000
1)
Drain Scarico acqua
– –
Drain only - no spinning. Alternative method of terminating programme after
“Rinse hold”.
– – –
i
– – – – – –
i : option / Yes : dosing required
1)
For improved garment care spin speed
is restricted in these programmes.
A
B
H
F
E
G
C
D
I
J
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01274
A
dd detergents as indicated on the front page and as
described in the chapter “Detergent and Additives”
in your Instructions for Use.
•
Turn the programme selector to the desired
programme and temperature.
•
The “Start(Pause)” indication lamp is blinking
and the indication lamp of the predefined spin
speed lights up.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show the the door can be opened.
As long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel (Reset)
a running programme before the end”.
Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch
off automatically. Unsuitable combinations of options
are deselected automatically.
“Rapid” button
• Enables quicker washing by shortening the
programme duration.
• Recommendable for small loads or only lightly
soiled laundry.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt). Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the “Prewash” option.
PROGRAMME START
Open the tap and press the “
Start(Pause)
” button.
The indication lamp next to the “
Start(Pause)
”
button lights up. The programme sequence indicator
shows the current programme phase, running from
left to right through Wash, Rinse, Spin/Drain.
• When the programme phrase is finised, the
corresponding indication goes out.
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “
Start(Pause)
” button to pause the
programme. The light blinks.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “
Start(Pause)
” button again.
The new programme continues at the same
position where the previous programme was
interrupted. Do not add detergent for this
programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
Intensive rinse” button
• More water is added and rinse cycle is
prolonged.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without pregressing to the final spin cycle to
avoid creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only
.
• If you select “Rinse hold” do not leave items to
soak for too long.
Note: The programme stops to “Rinse hold” at
the time the “Rinse hold” lights in the preogramme
sequence indication is on. The indication lamp
next to the “
Start(Pause)
” button blinks.
Terminate the “Rinse hold” option:
•
Press the “
Start(Pause)
” button; the programme
will terminate automatically with the final spin
cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “
Start(Pause)
” button.
START DELAY
The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent
when activating “Start delay” option.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay
time by 1, 3, 6, 9 or 12 hours.
• Press the “
Start(Pause)
” button.
The indication neto to the “Start delay” button
lights up and goes off when the programme starts.
• Once having pressed the “
Start(Pause)
” button,
the countdown of the time delay begins. When
the programme starts, the start delay indicator
lights goes off and is replaced by the programme
sequence indications.
• After the “
Start(Pause)
button has been pressed,
the number of hours preselected can be reduced
by pressing again the “Start delay” button.
To cancel the “Start delay”
..before you press the “
Start(Pause)
” button:
• Turn the programme selector to another position
or press the “Reset” button.
..after having pressed the “
Start(Pause)
” button:
• Press the “Reset” button for at least 3 second
- the start delay indicator light goes out.
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during the rinse. The water is drained out only.
The “Reset” button cancels a programme before
the end.
• Press and hold the “Reset” button for a few
seconds. Any existing water is drained out. It may
last some time until the door can be opened.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Service”
Lighting up of the “Service” indication can be caused
by a fault in an electrical component.
“Water tap closed”
The washing machine has no or insufficient water
supply; the water tap might be closed or the water
inlet hose kinked.
“Clean pump”
Waste water is not pumped out. The drain hose may
be kinked or the filter must be cleaned (see “Cleaning
the filter” in your Instructions for Use).
CONSUMPTION DATA
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
without “Rapid”
Approx. programme duration
(hours : minutes)
without “Rapid” with “Rapid”
Cotton 95 6.0 59* 1.90 2:00 -
Cotton ** 60 6.0 49 0.90 4:00 2:30
Cotton ** 60 3.0 37 0.69 2:20 ***
Cotton 40 6.0 54 0.65 2:45 1:45
Cotton ** 40 3.0 37 0.58 2:30 ***
Synthetics 60 3.0 50* 0.70 1:30 1:09
Synthetics 40 3.0 46 0.50 1:15 0:54
Delicates 30 1.5 50 0.50 0:45 -
Daily load 40 3.0 45 0.45 1:00 -
Quick wash 30 3.0 40 0.40 0:30 -
Wool 40 1.0 55 0.60 0:45 -
Handwash 40 1.0 45 0.60 0:40 -
Lingerie 30 1.0 45 0.50 0:36 -
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin
speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that
time (see also “Troubleshooting Guide” in your Instructions for Use).
*
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference programmes for Energy Label.
*** Automatic adaptation of programme duration after detection of wash load
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01274
-
1
-
2
Whirlpool AWO/D 6126 Program Chart
- Type
- Program Chart
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Whirlpool DLC 6020 Program Chart
-
-
-
-
-
-
Whirlpool DLC9020 Program Chart
-
-
-