Bauknecht GCIK 6541/1 IN Program Chart

Category
Dishwashers
Type
Program Chart

Bauknecht GCIK 6541/1 IN offers versatile washing programs designed to cater to different types of loads and cleaning needs. With its user-friendly interface, you can effortlessly select the optimal program for your dishes, whether they are lightly soiled or heavily soiled pots and pans. The appliance boasts an energy-efficient ECO program, ideal for everyday use, as well as an intensive program for tackling stubborn dirt. Additionally, the option to delay the start of the wash cycle allows you to schedule the operation of the dishwasher at a time that suits your routine.

Bauknecht GCIK 6541/1 IN offers versatile washing programs designed to cater to different types of loads and cleaning needs. With its user-friendly interface, you can effortlessly select the optimal program for your dishes, whether they are lightly soiled or heavily soiled pots and pans. The appliance boasts an energy-efficient ECO program, ideal for everyday use, as well as an intensive program for tackling stubborn dirt. Additionally, the option to delay the start of the wash cycle allows you to schedule the operation of the dishwasher at a time that suits your routine.

GB
Quick Reference Guide
Before using the dishwasher, you are advised to read the user instructions!
(We reserve the right to make technical modifications)
5019 496 96036
GCIK 6541/1
1) Reference programme for energy label in compliance
with Standard EN 50242 (upper rack adjusted in
upper position).
2) Refer to “User instructions”.
3) Programme values obtained according to EN 50242.
Values may vary in relation to usage, e.g.: different
loads, water temperatures - above or below 15° C - as
well as water hardness and power supply voltage, etc.
On/Off button
Press the On button to switch on the dishwasher.
The indicator lamp of the last programme selected
lights up; at the end of the cycle an acoustic signal
sounds.
Programme selection
button
Press the button to select a
programme. The corresponding
indicator lamp comes when a
programme is selected.
Start button
Press to start the wash cycle and hold until the start
cycle buzzer sounds and the indicator lamp for the
programme selected starts to blink.
Indicators
Add regeneration salt
Only add regeneration salt immediately before
starting a wash programme.
Add rinse aid
Option
“Delayed start” button
The wash cycle can be programmed to start after
1-12 hours. Then press the Start button. After a
prewash the set delay will start.
Display
The display shows all information concerning
programmed functions and indicates if a fault has
occurred (see table in user manual).
Programme Table
Detergent
2)
Consumption
3)
Programmes Loading instructions
A B Litres kWh Minutes
Pre-Rinse cold
Crockery to be washed later. 6.0 0.02 15
Quickwash 35°C
Lightly soiled crockery, with no dried-on food. X 13.0 0.80 35
ECO
1)
55°C
Normally soiled crockery. X 12.0 1.01 175
Intensive 70°C
Recommended programme for heavily soiled
crockery, ideal for pots and pans.
X X 20.0 1.60 110
49696036GB.fm Page 1 Thursday, December 16, 2010 12:27 PM
Black process 45.0° 150.0 LPI
How to use the appliance
Further indications are given in the single chapters and in the user instructions.
Press the
On/Off
button .
Large compartment
A
Small compartment
B
Mechanical indicator lamp
C
.
Electric indicator on control panel (if provided).
On models with water softener system only.
Mechanical indicator lamp
D
.
Electric indicator on control panel
(if provided).
Refer to the dishwasher loading instructions.
Press the button until the desired programme lights up.
If necessary (where present).
The corresponding indicator lamp lights up.
“Cancel programme”
Press and hold until the
indicator lamp for the selected
programme stops blinking. Press
and hold again (for about
10 secs) until P0 appears on the
display and the dishwasher goes to
the end of the cycle.
Close the door, after about 1 min.
the cycle ends.
“Change programme in progress”
Press and hold the Start button until the
indicator lamp for the selected programme stops
blinking.
Select a new programme.
Press the Start button until the indicator lamp
for the selected programme starts to blink.
- Only open the dishwasher if necessary
(Warning: beware of hot steam!
- If the appliance is switched off during a
wash cycle, when switched on again it
will resume the cycle from where it was
interrupted.
At the end of the programme an acoustic signal will sound. Open the door
and press the
On/Off
button . All the indicator lamps switch off.
Attention: Care must be taken when opening the door, as steam
will escape!
Empty the dishwasher starting from the bottom rack.
Open the door,
switch on the appliance
How to fill the detergent
dispenser
A
B
C
Check the rinse aid level
Check the
regeneration salt level
D
Load the racks
Select a programme
Select additional options
Close the door
to start the programme
Turn on the water tap,
close the door
Wash cycle
Switching off the appliance
Turn off the water tap,
unload the racks
49696036GB.fm Page 2 Thursday, December 16, 2010 12:27 PM
Black process 45.0° 150.0 LPI
Dishwasher loading instructions and racks provided
Upper basket:
for the model in use
Crockery holder (A):
Depending on the position: up or
down.
Long-handled utensils, cups and
glasses. Place the glasses to the side
of the rack or holders.
Place long and narrow utensils in
the centre of the rack or holders.
Long-handled utensils (e.g.
carving forks, knives) must be
arranged with the sharp end
facing in towards the appliance.
Rack height adjustment:
Release the caps (
B
) of both rack
rails.
Take the rack out.
Reposition the rack at the desired
height.
Close the caps (
B
).
The rack must be level on both
sides.
Lower basket:
Depending on the model with fixed
or tilting plate holders.
Cutlery basket:
Some models are provided with a grid
(
C
) that can be fitted onto the cutlery
basket to keep items separated.
Sharp knives and forks that
might cause injury must be
placed in the cutlery basket
with the sharp end facing
downwards.
Only use dishwasher-proof crockery and dishes. Do not try to wash items that are not suitable for washing in a
dishwasher, such as: wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery.
A
A
A
A
B
B
C
C
C
C
49696036GB.fm Page 3 Thursday, December 16, 2010 12:27 PM
Black process 45.0° 150.0 LPI
What to do if...
If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem
(* see also the corresponding chapter in the user instructions).
Problem Cause Remedy
The appliance is not
working
No water supply. Open the water tap.
The appliance doesn't fill enough water. Clean the water supply tap filter.
Ensure there are no kinks in the water hose.
There is a power failure. Insert the plug into the mains socket.
•Open the door.
•Close the door.
Check the domestic circuit fuse.
If dishes are not
perfectly dry
•Not enough rinse aid. •Increase dosage *.
Residual water in cavities. Load dishes at an angle.
If dishes are not
perfectly clean
The water jet does not reach the
dishes.
Arrange dishes so that items do not touch each other.
Load dishes upside down.
Too little detergent; Follow recommended detergent dosage.
Unsuitable programme. Select a more intense wash cycle.
Spray arms blocked. The spray arms must be able to turn freely.
Spray arm nozzles jammed. Remove any impurities obstructing the water flow*.
Incorrect detergent/detergent too old. Use a good quality detergent.
Sandy or grainy residues
Clogged filters. Check filters regularly/if necessary clean them*.
Filters incorrectly assembled. Insert the filter correctly*.
Colour of plastic parts
faded
Tomato/Carrot juice.... Depending on the material, if necessary use a
detergent with a greater whitening power.
Deposits on dishes
can be removed Streaks on the dishes/glasses. Decrease the rinse aid setting*.
Layer of salt on dishes/glasses. Close the salt container lid properly*.
not removable Insufficient water softening, calcium
deposits.
Change water hardness setting, if necessary add salt*.
Opaque glasses/glasses
not sparkling
Cannot be washed in the dishwasher. Use suitable glasses.
Rust on cutlery
Not made of stainless steel. •Use suitable cutlery.
If, after carrying out the above checks the malfunction persists or appears again, turn the appliance off and turn off the water
supply tap, then call our After-Sales Service (see guarantee).
Before contacting our After-Sales Service, please have the following information ready:
The nature of the fault.
The appliance type and model.
The service code (the number indicated on the adhesive rating plate)
inside the door on the right-hand side.
49696036GB.fm Page 4 Thursday, December 16, 2010 12:27 PM
Black process 45.0° 150.0 LPI
1 / 1

Bauknecht GCIK 6541/1 IN Program Chart

Category
Dishwashers
Type
Program Chart

Bauknecht GCIK 6541/1 IN offers versatile washing programs designed to cater to different types of loads and cleaning needs. With its user-friendly interface, you can effortlessly select the optimal program for your dishes, whether they are lightly soiled or heavily soiled pots and pans. The appliance boasts an energy-efficient ECO program, ideal for everyday use, as well as an intensive program for tackling stubborn dirt. Additionally, the option to delay the start of the wash cycle allows you to schedule the operation of the dishwasher at a time that suits your routine.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document