Bauknecht WAT 810 Program Chart

Brand: Bauknecht

Model: WAT 810

Category: Washing machines

Type: Program Chart

Bauknecht WAT 810 is a versatile washing machine equipped with a range of features to make laundry tasks simpler and more efficient. With 16 different programs to choose from, including options for cotton, synthetics, delicates, wool, and more, you can customize the wash cycle to suit the needs of your laundry load. It also offers various additional options like prewash, intensive rinse, tumble fresh, rapid, and 15° Green & Clean, allowing you to tailor the wash to your specific requirements.

5019 400 00033

Programme

Tempera-

ture

Care

Labels

Max.

Load

Type of wash / Notes

- for temperature selection, respect the manufacturer's recommendations on the care

label

Detergents and additives Special options

Finish

on time

Spin

Pre-

wash

Main

wash

Softener

Pre-

wash

Intensive

rinse

Tumble

fresh

Rapid

15° Green

& Clean

Spin Max

spin

speed

rpm

Mixed

15 - 60°C 3.0

Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their

blends. Effective one-hour programme. Make sure to wash only similar colours together in one

wash load.

– Yes

–

i i

–

i i i

max.

Fabrics

Cotton

15 - 95°C 6.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.

made of cotton and linen.

Yes

i i i i i i i i

max.

Synthetics

15 - 60°C 3.0

Normally soiled garments made of artificial fibres (like polyester, polyacryle, viscose

etc.) or their blends with cotton.

Yes

i i i i i i i i

max.

Delicates

15 - 40°C 1.5

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Yes

i i

–

i i i

1000

Wool /

Handwash

15 - 40°C 1.0

Woollens, labelled with the Woolmark and identified as machine washable, as well as

textiles made of silk, linen, wool and viscose marked as handwashable.

– Yes

– –

–

i i i

1000

Jeans

15 - 60°C 4.0

Normally soiled cotton jeanswear and garments made of robust jeanslike material such

as trousers and jackets.

Yes

i i i i i i i i

1000

Colours

White

15 - 60°C 6.0

Normally to heavily soiled and robust white cotton laundry.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product,

in addition to your detergent.

– Yes

–

i i

–

i i i

max.

Light Colours

15 - 60°C 4.0

White and pastel shaded garments made of delicate fabrics. Gentle wash programme to

avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also stain removers or

bleaches on oxygen basis. Do not use liquid detergent.

Yes

i i i i i i i i

1000

Dark

15 - 60°C 4.0

Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration. Prefer to use a liquid

detergent for dark garments with this programme.

Yes

i i i i i i i i

max.

Eco

eCotton

40 - 60°C 6.0

Normally soiled cotton laundry. Most favourable programme in terms of combined water and

energy consumption for washing cotton laundry.

- Reference programme for the Energy Label.

– Yes

–

i i

– –

i i

max.

Aqua Eco

15 - 40°C 2.5

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton

garments. Saving programme with very low water consumption. Use liquid detergent and the

lowest recommended amount for 3 kg laundry. Do not use softener.

– Yes – – –

–

i i i

max.

Speed 15

15 - 30°C 3.0

Refreshes briefly worn clothing made of cotton, artificial fibers and blends with cotton.

Use lowest recommended detergent amount.

– Yes

– –

–

i i i

max.

Rinse & Spin

– – 6.0

Rinse and intensive spin programme.

Same as the last rinse and the final spin in the “Cotton” programme.

– –

–

i i

– –

i i

max.

Spin – – 6.0

In this programme spinning is intensive.

Same as the spin cycle in the “Cotton” programme.

– – – – –

– –

i i

max.

A. Programme selector

B. Option buttons

C. “Favourite” button

D. “Temperature” button

E. “Finish on time” button

F. “Spin” button

G. “Start” button

H. “Reset/Drain” button

I. Display

J. Programme sequence indicator

Bauknecht is a registered trademark.

K. “Lid open” indication

L. “Child lock” indication

Your washing machine is equipped with

automatic safety functions which detect and

diagnose faults at an early stage and react

appropriately, e.g.:

M. “Water tap closed” indication

N. “Clean pump” indication

O. “Service” indication

PROGRAMME CHART

i: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Active only for models with “Soil level” option.

Acustic noise level :

Washing - 59 dB(A) / 1pW

Spinning - 1200, rpm, 76 dB(A) / 1pW

K L

5019 400 00033

Bauknecht is a registered trademark.

ADD DETERGENTS, CLOSE THE LID AND

SELECT THE PROGRAMME

Add detergent as indicated on the front page and as

described in the chapter “Detergent and Additives” in your

Instructions for Use.

1. Turn the programme selector to the desired programme.

The indication next to the “Start” button blinks.

2. The temperature and spin speed indicated on the

display can be altered by pressing the “Temperature”

button or the “Spin” button. If you do not start the

programe soon after having made your choice, the

washing machine will switch off automatically after about

a quarter of an hour. Switch on the washing machine

again by turning the programe selector back to „Off/O“

and then to the desired programe.

SELECT ANY DESIRED OPTION

When the combination of programme and additional

option(s) is not possible, the indication lights switch off

automatically. Unsuitable combinations of options are

deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular

dirt) sensible. Increases the cycle time by approximately

15 min.

• Do not use liquid detergent for the main wash when

activating the Prewash option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helping people with

allergies.

“Tumble fresh” button

• Select this option if you cannot unload the laundry soon

after programme end, or if you tend to forget the

laundry in your washing machine. It will help to keep

your laundry fresh.

• The washing machine will start to tumble the laundry

periodically after programme end.

• The light of the “Tumble fresh” button will blink while

this function is active, and the display will show an

animation.

• The periodic tumbling will last up to approximately 12

hours after the end of your wash programme, and you

can stop it at any time by pressing the “Tumble fresh”

button. It will last a while until you can open the door.

• After the “tumble fresh” period has run out, the display

indicates “End”

“Rapid” button

• Enables quicker washing by shortening the programme

duration.

• Recommendable for small loads or only lightly soiled

laundry.

“15° Green & Clean” button

• Saves energy used for water heating while maintaining a

good wash result.

• Supports colour maintenance when washing coloured

laundry.

• Recommendable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold wash

temperatures (15 or 20 °C).

• Not selectable for Cotton 70 - 95°C.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled, and the water is drained out only. However,

intermediate spin peaks remain during the rinse phase.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the

appliance offers the possibility to save one setting for each

programme so that it can be used again by just pushing one

button.

• Select the desired programme, temperature, spin speed

and option(s), push and hold the “Favourite” button

for at least 3 seconds. The lamp next to “Favourite”

shortly flashes and then lights up - the programme

settings is saved.

Next time you want to use your individual programme

settings, select the programme, push the “Favourite”

button and start by pushing “Start”.

If you want to replace the saved programme setting by

another one:

• Select programme temperature, spin speed and options

as desired and then press and hold the “Favourites”

button for at least 3 seconds.The previously saved

programme setting will be replaced by the new one.

FINISH ON TIME

With this function you can postpone your programme to

complete at a later time: press the button to select in how

many hours the programme shall be finished. Thus, it allows

you to have your laundry ready at a particular time and to

profit from more favourable energy rates during the night,

for example.

• Do not use liquid detergent when activating this function.

• The time until the “Cycle end” can be selected in full

hour time segments (1 to 24 h). When you press the

button, the shortest possible time will be displayed; keep

on pressing the button to loop through all the available

times. To remove it again, keep on pressing the button

until you see the value “0:00”.

• When you have selected the desired time until the

“Cycle end”, press “Start” - the countdown will begin.

• During the countdown, you can still modify the

programme setting (select or deselect options, change

spin speed etc.). If the modifications prolong the

programme duration so that it overruns the originally

set time until the “Cycle end”, the programme will start

immediately.

• Sometimes the programme may finish before the

selected time until the “Cycle end” has expired (e.g.

for small loads). In this case, the washing machine will

tumble the laundry regularly to keep it fresh, until the

selected “Cycle end” time has expired. During tumbling,

the display will show an animation. The tumbling phase

can be stopped at any time either by pressing any button

or by rotating the programme selector; the animation

will stop and the door will unlock in about 1 minute as

indicated on the display.

PROGRAMME START

Open the tap and press the “Start”button. The blinking

“Start” button light becomes constant. The „Door open“

indication gets off, and the wash symbol lights to indicate that

the programme is in process. In some phases, the remaining

programme time is newly calculated – if this is the case,

the „6th sense“ indication on the display will fade, and the

remaining programme time is replaced by an animation.

CHILD LOCK

You can lock the buttons of the control panel against

improper use (e.g. by children).

• Press the temperature and spin speed button

simultaneously and hold them for at least 3 seconds. The

key symbol on the display lights up.

• To unlock the buttons again: proceed in the same way.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp

lights to show the the lid can be opened. As long as a wash

programme is running, the lid remains locked and must on

no account be forced open. In case you have an urgent need

to open it during a running programme, refer to “Cancel a

running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed”

No or not sufficient inlet water.

“Service”

Failure or malfunction of an electrical component.

“Clean pump”

Waste water is not pumped out.

Spin speed on display blinks: unbalance during spinning

•

PROGRAMME END

The “Door open” indicator lights up, and the display

shows “End”. After about a quarter of an hour, the

washing machine will switch off completely to save

energy.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open to allow the inside of the machine to

dry.

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

Press the “Start” button to pause the programme. The

light blinks.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the “Start”button again. The new programme

continues at the same position where the previous

programme was interrupted. Do not add detergent for

this programme.

CANCEL A RUNNING PROGRAMME BEFORE

THE END

The “Reset/Drain” button cancels a programme before

the end.

• Press the “Reset/Drain” button for at least 3 seconds.

The water is drained out; it may last a while until you can

open the lid.

CONSUMPTION DATA

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with

respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer

to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Standard Cotton programme and basis for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.

Programme

Tempe-

rature

(°C)

Load

(kg)

Water

(l)

Energy

without “Rapid”

(kWh)

Approx. Programme Duration (hrs : min)