imoshion Ring Led Light User manual

Brand
imoshion
Model
Ring Led Light
Type
User manual
Ring Led Light
USER’S MANUAL
Standing Guide
1. Adjust the light ring to get a perfect angle for
reading / lighting.
2. Fasten the Knob screw clock-wise to lock the hinge to fix
the ring light.
3. Adjust the ligth color temperature and brightness to get
a comfortble experience.
Maintenance
Notes
1. Please pull out the USB cable when charging finished.
2. When don’t use this product for long time, it might not
be able to turn on instantly due to the battery out. You can
recharge the battery to active it. Please charge the product
every 3 months regularlly.
3. Please do not drop or impact the product to avoid scratches
on the surface
4. This product is not water-proof, please keep it dry.
1. Please do not disassemble or modify the product.
2. Please do not submerge the product into water or put
it in fire.
3. It’s normal that the shell might become hot when use
for a long time.
4. Please do not keep the product under high temperature
or high humidity
1. Open the bottom
organization niche and pull
out the USB power cord.
2. Pull upwards the lamp
ring to releaseit and rise the
light pole vertically, Grip the
lamp ring to extend the
retractable pole.
3. Push downwards the lock
sleeve and rotary clockwise
to fix the light pole
4. Extend the pole to
appropriate height you want.
then install the phone to the
clamp holder tightly. Please
use the joint hinge to
adjust angle.
Two-step
locking system
Over head Shooting Guide
1. Pull out the kickstand to sustain the light pole.
2. Unstall the smartphone clamp mount and turn over then
fix it again.
3. Install your phone to the smartphone clamp holder mount
and turn the light on.
4. Adjust the height, angle and brightness to start the over
head shooting.
Operation Guide
How to set up
Product Parameters:
Demension: 30*30*7cm
Weight: 1150g
Height: 26-172cm
Light color: Warm/ White
Color temperature: 3500-6000k
Input: DC 5V
Power: 5W-12W
Lamp Ring
Joint Hinge
Light Pole
Lock Sleeve
Cold Shoe Mount
Cell phone mount
Switch /Controller
1. Unstall the smartphone.
Retract the light pole to
initial length.
2. Rotary the locking sleeve
counter clockwise and pull it
up to unlock it
3. Push downwards the
light ring to restore the
lamp slightly.
4. Do not forget restore the
USB cable after use.
Operation Guide
How to restore
Two-step
locking system
Turn over
the phone
mount
  • Page 1 1

imoshion Ring Led Light User manual

Brand
imoshion
Model
Ring Led Light
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents