2. jbc
  3. C360003

jbc C360003 Owner's manual

  • Hello! I've reviewed the instruction manual for the JBC C360 series micro desoldering tips. This document covers various models (C36001, C36002, C36003, C36004, C36007, C36006, C36011, C36012, C36013, C36014) and explains their use for through hole desoldering and pad cleaning. I'm ready to answer any questions you have about the tips, their features, or how to properly care for them.
  • What is the purpose of these tips?
    How should I clean the tips?
    What should I not do to the tips?
INSTRUCTION MANUAL
C360 Tips
Micro Desoldering Tips
for DS360
www.jbctools.com
A
B
A
B
The largest rod that fits in the tip hole
should periodically be passed through in
order to clean the intake tube.
The microdesoldering tips are protected
against oxidization and wear.
Do not use abrasive tools which may
damage the tips protective surface coating
and avoid knocking them about.
To maintain the tips, use the recommended
cleaning methods (brass wool, brushes,
sponge). Only use the TT-A re-tinner when
absolutely necessary.
Tip care
2
This manual corresponds to the following references:
Through Hole Desoldering
- Ref. C36001 (Ø 0.6)
- Ref. C36002 (Ø 0.8)
- Ref. C36003 (Ø 1.0)
- Ref. C36004 (Ø 1.2)
- Ref. C36007 (Ø 1.4)
- Ref. C36006 (Ø 3.0)
Pad Cleaning
- Ref. C36011 (Ø 0.6)
- Ref. C36012 (Ø 0.8)
- Ref. C36013 (Ø 1.0)
- Ref. C36014 (Ø 1.2)
Packing list
C360 Tips ......... 10 units
According to purchased
reference
Manual .................... 1 unit
Ref. 0007419
A
B
A
B
C360 Tip Ranges
www.jbctools.com
3
Ref. mm in mm in mm in
C36001 1.0 0.039 0.6 0.024 0.4 0.016
C36002 1.2 0.047 0.8 0.032 0.6 0.024
C36003 1.4 0.055 1.0 0.039 0.8 0.032
C36004 1.6 0.063 1.2 0.047 1.0 0.039
C36007 1.9 0.075 1.4 0.055 1.2 0.047
C36006 3.0 0.118 1.5 0.059 1.3 0.051
C36011 1.0 0.039 0.6 0.024 - -
C36012 1.3 0.051 0.8 0.032 - -
C36013 1.4 0.055 1.0 0.039 - -
C36014 1.6 0.063 1.2 0.047 - -
Ø A Ø B Ø max. pin
Through hole desolderingPad cleaning
A
B
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic
equipment at the end of its life must be collected and returned to an
authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to
the dealer where it was purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0007419-090223
/