Minka Lavery 4462-84 Installation guide

Type
Installation guide

Minka Lavery 4462-84 is a stylish and functional light fixture designed to enhance the ambiance of your living space. With its easy installation process, you can quickly and effortlessly mount it on your ceiling. The fixture accommodates multiple light bulbs, allowing you to customize the brightness according to your preference. It also features a secure glass shade that twists into place, ensuring both safety and an elegant look. Experience the charm and versatility of the Minka Lavery 4462-84 in your home lighting.

Minka Lavery 4462-84 is a stylish and functional light fixture designed to enhance the ambiance of your living space. With its easy installation process, you can quickly and effortlessly mount it on your ceiling. The fixture accommodates multiple light bulbs, allowing you to customize the brightness according to your preference. It also features a secure glass shade that twists into place, ensuring both safety and an elegant look. Experience the charm and versatility of the Minka Lavery 4462-84 in your home lighting.

INSTALLATION INSTRUCTIONS
Item#4462 (New. 01/04/2012)
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig.1
Fig. 2
MOUNTING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker and remove
old fixture, including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the
parts on a clear area. Take care not to lose any small
parts necessary for installation.
3. Attach the mounting plate (A) to the outlet box using
the mounting screws (B) (Size: #8-32N*L0.5”). The
side of the mounting plate marked “GND” must face
out.
CONNECTING THE WIRES (Fig. 2)
4. At this point, connect the electrical wires as shown in
figure 2, making sure that all wire connectors are
secured. If your outlet box has a ground wire (green
or bare copper), connect the fixture’s ground wire to
it and secure with the wire connectors, otherwise,
connect the fixture’s ground wire directly to the
Mounting plate using the green screw provided. After
wires are connected, tuck them carefully into the
ceiling junction box.
FINISHING THE INSTALLATION (Fig. 1)
5. Place the Backplate (G) over the mounting plate (A),
and secure it with screws (C).
6. Install the light bulb(s) (E) (not included) in
accordance with the fixture’s specification. (DO NOT
EXCEED THE MAXIMUM WATTAGE RATING!!)
(NE PAS DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!).
7. Place the glass (F) over the socket and twist to
secure it to the fixture.
Your installation is now complete. Return power to
the junction box and test the fixture.
Note: Illustration (Fig.1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
LA-2104E
F
E
D
C
A
B
G
HOUSE
WIRES
Black
(Hot)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green
(Ground)
  • Page 1 1

Minka Lavery 4462-84 Installation guide

Type
Installation guide

Minka Lavery 4462-84 is a stylish and functional light fixture designed to enhance the ambiance of your living space. With its easy installation process, you can quickly and effortlessly mount it on your ceiling. The fixture accommodates multiple light bulbs, allowing you to customize the brightness according to your preference. It also features a secure glass shade that twists into place, ensuring both safety and an elegant look. Experience the charm and versatility of the Minka Lavery 4462-84 in your home lighting.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI