Philips DLP2810T/05 User manual

DLP2810T/05

USB Charging Kit (DLP2620/05 Wall charger+DLP2520/00 Car charger+DLC5204T/00 3 in 1 charging cable)

User Instruction

Features

 DLP2620/05, Support dual USB A ports, charge two phones at the same time. Total

5V/3.4A, 17 W fast charging.

 DLP2520/00, Support dual USB A ports, charge two phones at the same time. Total

5V/3.1A, 15.5W fast charging.

 DLC5204T/00, Support charging phones with Micro USB, USB C and Lightning interface.

 Smart protection against overheating, overvoltage and overcurrent.

 Compatible with iPhone, iPad, Samsung and other Android smart phones, tablets.

Safety Notes

 Do not disassemble or throw into fire or water to avoid damage.

 Do not use charger in severely hot, humid or corrosive environments to avoid circuit

damage and occur leakage phenomenon.

 To take care of the children, to ensure that they won’t play the charge as a toy.

 Unplug the charger in emergency cases such as smoke from the unit, changed shape,

liquid or material leakage.

 Do not use the charger when it is damaged or broken.

 This charger is intended for indoor use only.

Instruction

 Plug & Go: Just connect and start. Voltage and power will automatically configured by

wall charger.

 Support charging two devices simultaneously.

Get product support at:

www.philips.com/support

TP Vision Europe B.V. Prins Bernhardplein 200, 1097 JB Amsterdam, The Netherlands

Philips and the Philips Shield emblem are registered trademarks of Koninklijke Philips N.V.

and are used under license. This product has been manufactured by and is sold under the

responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong

Kong Holding Limited is the warrantor in relation to this product.