Page 1
NP-F970 Power Kit User Manual
Overview
The ZILR NP Battery has advanced technology to power your camera or external devices. Never
miss a shot again due to low capacity batteries or waiting around for your next charge.
What’s in the box
NP-F970 USB-C PD Battery
Product Code
ZRNPB01
NP-F970 Battery User Manual
Page 2
NP-F970 Power Kit User Manual
Charging the NP-F970 Battery
The NP-F970 battery should be charged using the recommended ZILR USB-C PD Wall Charger
(ZRACC01*) and USB-C cable (ZRUCC01*). This will ensure that the battery is charged correctly and
supports fast charging via this method.
When using the Wall Charger (ZRACC01*), use the AC international adaptor plug for wall charger that
matches your region.
Recommended charging setup
Do not overcharge. Do not expose the batteries and charger to fire or liquids.
*Sold separately
Getting Started
Page 3
NP-F970 Power Kit User Manual
NP-F970 Battery LED Charging Functions
The NP-F970 battery features LEDs to indicate the current charge level.
Battery Insert Direction LED Indicators Output / Check Level
LED Charging Indicators
Charging Full - 100%
Charging 3/4 - 75% (Flashing/Blinking)
Charging 2/4 - 50% (Flashing/Blinking)
Charging 1/4 - 50% (Flashing/Blinking)
Page 4
NP-F970 Power Kit User Manual
NP-F970 Battery LED Power Usage Functions
The NP-F970 battery features LEDs to indicate the current power level while in use. Press the Output /
Check Level button to view the current level.
Battery Insert Direction LED Indicators Output / Check Level
LED Power Indicators
In Use Full - 100%
In Use 3/4 - 75%
In Use 2/4 - 50%
In Use 1/4 - 50% (Flashing/Blinking)
Page 5
NP-F970 Power Kit User Manual
NP-F970 Battery on L-Series Devices
The NP-F970 battery can be used on L-Series devices using the standard 7.4V base terminal.
Using the NP-F970 on devices
Connect via the base terminalUse the NP battery slot on the device
Page 6
NP-F970 Power Kit User Manual
Connect via the base terminal Connect via the USB-C port USB-C or Lightning device
OR
Use the NP battery slot on the device
Press to output power
NP-F970 Battery USB-C Output
The USB-C output on the NP-F970 battery can be used to power another device while in use. First connect the
battery to the compatible NP battery/L-Series device via the device’s slot. Next plug in the USB-C to USB-C cable
(ZRUCC01*) or the USB-C to Lightning cable (ZRUCL01*) to a USB-C or Lightning port on the second device. Press the
Output Power button on the top of the NP-F970 battery. The second device will then be powered from the battery.
NOTE: Using two devices at one will drain the battery faster.
*Sold separately
Using the NP-F970 with two devices
Page 7
NP-F970 Power Kit User Manual
NP-F970 Battery power bank mode
The NP-F970 also doubles as a power bank, enabling charing of mobiles and tablets. The battery does
not require to be connected to a L-Series device for this to work. Simply plug in the USB-C to USB-C
cable (ZRUCC01*) or the USB-C to Lightning cable (ZRUCL01*) to a USB-C or Lightning port on the
mobile or tablet. Press the Output Power button on the top of the NP-F970 battery. The device will then
be powered from the battery. The device will then charge. It also supports fast charging on devices that
support this feature.
Using the NP-F970 as a power bank
No L-Series device required
*Sold separately
USB-C or Lightning device
OR
Connect via the USB-C port
Press to output power
Page 8
NP-F970 Power Kit User Manual
Warning
Only use ZILR accessories with this product as accessories from other manufactures have not been
tested and may cause damage to your device.
Do not over charge batteries.
Do not use this product near water or get it wet as it could cause risk to you or the device.
Do not expose batteries to heat or fire.
Do not overload the power on this device.
Supported Accessories
- ZRACC01 USB-C AC Wall Charger
- ZRUCC01 USB-C to USB-C cable
- ZRUCL01 USB-C or Lightning cable
- ZRUCDB01 USB-C to Sony NP-FZ100
- ZRUCDB02 USB-C to Panasonic DMW-DCC16
- ZRUCDB03 USB-C to Nikon EN-EL15
- ZRUCDB04 USB-C to Canon LP-E6
Looking for further help?
Please contact us should you require help or require more information. Contact us below:
https://www.zilr.pro/support/
Support
!
!
!
!
!
/