Electrolux ESF2200DW User manual

ESF 2200 DW

................................................ .............................................

EN DISHWASHER USER MANUAL

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

CONTENTS

Safety instructions 2

Product description 4

Control panel 5

Use of the appliance 5

Use of dishwasher salt 5

Use of detergent and rinse aid 6

Loading cutlery and dishes 8

Setting and starting a programme 9

Programmes 10

Care and cleaning 10

What to do if… 11

Technical data 13

Environment concerns 13

Installation 14

Subject to change without notice.

SAFETY INSTRUCTIONS

Before the installation and use of the appli-

ance, carefully read the supplied instruc-

tions. The manufacturer is not responsible if

an incorrect installation and use causes in-

juries and damages. Always keep the in-

structions with the appliance for future ref-

erence.

CHILDREN AND VULNERABLE

PEOPLE SAFETY

Warning! Risk of suffocation, injury or

permanent disability.

• Do not let persons, children included,

with reduced physical sensory, reduced

mental functions or lack of experience

and knowledge use the appliance. They

must have supervision or instruction for

the operation of the appliance by a per-

son who is responsible for their safety.

Do not let children play with the appli-

ance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the

appliance door when it is open.

INSTALLATION

• Remove all the packaging.

• Do not install or use a damaged appli-

ance.

•Do not install or use the appliance where

the temperature is less than 0 °C.

Water connection

• Make sure not to cause damage to the

water hoses.

• The appliance is to be connected to the

water mains using the new supplied

hose-sets. Old hose sets must not be

reused.

• Before you connect the appliance to new

pipes or pipes not used for a long time,

let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

Electrical connection

Warning! Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical information

on the rating plate agrees with the power

supply. If not, contact an electrician.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-plug adapters and ex-

tension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable. Con-

tact the service centre or an electrician to

change a damaged mains cable.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains

plug.

2 electrolux

USE

• This appliance is intended to be used in

household and similar applications such

as:

– Staff kitchen areas in shops, offices

and other working environments

– Farm houses

– By clients in hotels, motels and other

residential type environments

– Bed and breakfast type environments.

Warning! Risk of injury.

• Do not change the specification of this

appliance.

• Put knives and cutlery with sharp points

in the cutlery basket with the points down

or in a horizontal position. Make sure that

the points do not protrude from the bot-

tom of the cutlery basket.

• Do not keep the appliance door open

without supervision to prevent to fall on it.

• Do not sit or stand on the open door.

• Dishwasher detergents are dangerous.

Obey the safety instructions on the deter-

gent packaging.

• Do not drink and play with the water in

the appliance.

•Do not remove the dishes from the appli-

ance until the programme is completed.

There can be detergent on the dishes.

Warning! Risk of electrical shock, fire

or burns.

• Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

• Do not use water spray and steam to

clean the appliance.

• The appliance can release hot steam if

you open the door while a programme

operates.

SERVICE CENTRE

Only a qualified person can repair or work

on the appliance. Contact the service cen-

tre.

Use only original spare parts.

DISPOSAL

Warning! Risk of injury or suffocation.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and dispose of it.

• Remove the door catch to prevent chil-

dren and pets to get closed in the appli-

ance.

electrolux 3

PRODUCT DESCRIPTION

1 2 5 63

Salt container

Detergent dispenser

Rinse aid dispenser

Spray arm

Filters

Rating plate

Drain hose

Inlet hose connection

Mains cable

Basket

Cutlery basket

Accessories

C ED

A B

4 electrolux

A) Water inlet hose

B) Plastic support for drain hose

C) Salt funnel

D) Measuring container for rinse aid

E) Measuring spoon for detergent

CONTROL PANEL

Delay Program

Star

On/off indicator

Indicators

Programme indicators

Start button

Programme button

Delay button

On/off button

Indicators

Prewash indicator. It comes on when the prewash phase operates or when the

delay start is set.

Wash indicator. It comes on when the washing phase operates.

Rinse indicator. It comes on when the rinsing phases operate.

Dry indicator. It comes on when the drying phase operates.

Salt indicator. It comes on when it is necessary to fill the salt container.

After you fill the container, the salt indicator can stay on for some hours. This does

not have an unwanted effect on the operation of the appliance.

Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispenser.

USE OF THE APPLIANCE

1. Fill the salt container with dishwasher

salt.

2. Fill the rinse aid dispenser with rinse aid.

3. Load cutlery and dishes into the appli-

ance.

4. Open the water tap.

5. Set the correct programme for the type

of load and soil.

6. Fill the detergent dispenser with the cor-

rect quantity of detergent.

7. Start the programme.

USE OF DISHWASHER SALT

Hard water contains a high quantity of min-

erals that can cause damage to the appli-

ance and bad washing results. The water

softener neutralises these minerals.

Contact your local water authority for infor-

mation about the water hardness in your

area.

electrolux 5

Caution! Only use salt for

dishwashers. Other types of salt will

cause damage to the appliance.

Fill the salt container before you start a

programme. Remaining salt in the ap-

pliance can cause corrosion.

Filling the salt container

1. Turn the cap counterclockwise and

open the salt container.

2. Fill the salt container with 1 litre of water

(only for the first time you fill with salt).

3. Use the funnel to fill the salt container

with salt.

4. Remove the salt around the opening of

the salt container.

5. Turn the cap clockwise to close the salt

container.

It is normal that water comes out from

the salt container when you fill it with

salt.

USE OF DETERGENT AND RINSE AID

USE OF DETERGENT

Caution! Only use detergents for

dishwashers.

To help the environment, do not use

more than the recommended quantity

of detergent given by the detergent

manufacturer.

Filling the detergent dispenser

1. Press the release button (A) to open the

lid (B) of the detergent dispenser.

2. Put the detergent (approximately 15 g)

in the compartment (C). The compart-

ment has two parts (D) and (E) that refer

to different quantities of detergent (15 g

and 25 g). Put detergent tablets in part

(E) of the compartment.

6 electrolux

3. Close the detergent dispenser. Press

the lid until the release button locks into

position.

4. If the programme has a prewash phase,

put a small quantity of detergent (ap-

proximately 3 g) on the lid of the deter-

gent dispenser.

Detergent tablets do not fully dissolve

with short programmes and detergent

residues can stay on the dishes when

the programme is completed.

We recommend that you use detergent

tablets with long programmes.

USING COMBI DETERGENT TABLETS

These tablets contain agents as detergent,

rinse aid and dishwasher salt. Some types

of tablets can contain other agents.

When you use tablets, that contain salt and

rinse aid, do not fill the salt container and

rinse aid dispenser. The rinse aid indicator

and the salt indicator stay on when the ap-

pliance is on.

Adjust the rinse aid dispenser on position 1.

Be sure that these tablets are applicable for

the water hardness in your area (refer to the

instructions on the packaging of the prod-

ucts). Contact your local water authority for

information about the water hardness in

your area.

Using again separately detergent, salt

and rinse aid

1. Fill the salt container and the rinse aid

dispenser.

2. Start a programme without dishes.

3. When the programme is completed, ad-

just the position of the rinse aid dispens-

er.

USE OF RINSE AID

Caution! Do not fill the rinse aid

dispenser with other products than

rinse aid. This will cause damage to the

appliance.

Rinse aid makes it possible to dry the

dishes without streaks and stains.

The rinse aid dispenser automatically

adds rinse aid during the last rinsing

phase.

Filling the rinse aid dispenser

1. Turn the cap (F) counterclockwise and

remove it.

2. Fill the rinse aid dispenser (G) with rinse

aid. The mark 'max' shows the maxi-

mum level.

electrolux 7

3. Remove the spilled rinse aid with an ab-

sorbent cloth to prevent too much foam

during the programme.

4. Put the cap on again and turn it clock-

wise until it locks. Make sure that the

signs on the cap and on the dispenser

are aligned.

ADJUST THE RINSE AID DOSAGE

Factory set: position 4.

You can set the rinse aid dosage between

position 1 (lowest dosage) and position 4

(highest dosage).

Turn the rinse aid selector (H) to increase or

decrease the dosage.

LOADING CUTLERY AND DISHES

HINTS AND TIPS

• Do not put in the appliance items that

can absorb water (sponges, household

cloths).

• Remove the remaining food from the

items.

• Make soft the remaining burned food on

the items.

• Put hollow items (cups, glasses and

pans) with the opening down.

• Make sure that water does not collect in

containers or in bowls.

• Make sure that cutlery and dishes do not

bond together.

• Make sure that the glasses do not touch

other glasses.

• Put small items in the cutlery basket.

•Mix the spoons with other cutlery to pre-

vent them to bond together.

• When you put the items in the basket,

make sure that the water can touch all

surfaces.

• Make sure that light items cannot move.

• Water droplets can collect on plastic

items and non-stick pans.

LOADING THE BASKET

The rows of prongs in the basket can be

lowered to load pots, pans and bowls.

8 electrolux

Mix the spoons with other cutlery to prevent

them to bond together.

The cutlery basket has 2 cutlery grids that

you can easily remove.

Caution! Make sure that the spray arm

can turn freely before you start a

programme.

SETTING AND STARTING A PROGRAMME

Starting the programme without delay

start

1. Close the appliance door.

2. Open the water tap.

3. Press the on/off button to activate the

appliance. The on/off indicator comes

on.

4. To set a programme, press the pro-

gramme button until the indicator of the

programme you want to set comes on.

5. Press the start button to start the pro-

gramme.

Starting the programme with delay

start

1. Close the appliance door.

2. Open the water tap.

3. Press the on/off button to activate the

appliance. The on/off indicator comes

on.

4. Set a programme.

5. Press the delay button to delay the start

of the programme of 3 hours.

6. Press the start button to start the count-

down.

• When the countdown is completed,

the programme starts automatically.

Cancelling the delay start

Press the delay button, the prewash indica-

tor goes off. The programme starts auto-

matically.

Interruption of the programme

1. Open the appliance door. The pro-

gramme stops.

2. Close the appliance door. The pro-

gramme continues from the point of in-

terruption.

Cancelling the programme

Press and hold the start button for about 3

seconds to cancel the programme.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is completed, an in-

termittent acoustic signal operates for ap-

proximately 8 seconds.

1. Press the on/off button to deactivate the

appliance.

2. Close the water tap.

electrolux 9

• Let the dishes become cold before

you remove them from the appli-

ance. Hot dishes can be easily dam-

aged.

• There can be water on the sides and

on the door of the appliance. Stain-

less steel becomes cool more quick-

ly than the dishes.

PROGRAMMES

Programme Degree of soil

Type of load

Programme

description

Duration

(min)

Energy

(kWh)

Water

(l)

Intensive 70°

Heavy soil

Crockery, cutlery,

pots and pans

Prewash

Wash 70 °C

Rinses

Dry

145 0.94 11

Normal 60°

Normal soil

Crockery, cutlery,

pots and pans

Prewash

Wash 60 °C

Rinses

Dry

125 0.70 8.4

Eco 55°

Normal soil

Crockery and cut-

lery

Prewash

Wash 55 °C

Rinses

Dry

170 0.63 8.4

Delicate 45°

Normal or light

soil

Delicate crockery

and glassware

Wash 45 °C

Rinses

Dry

75 0.48 6.8

Quick 40°

Fresh soil

Crockery and cut-

lery

Wash 40 °C

Rinses

30 0.30 6

Rinse & Hold

All Cold prewash 14 0.01 2.1

1) This is the standard programme for test institutes.

2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

3) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad

odours to come out from the appliance.

Do not use detergent with this programme.

Information for test institutes

For all the necessary information for test performance. send an email to:

[email protected]

Write down the serial number (SN.) that is on the rating plate.

CARE AND CLEANING

TO REMOVE AND CLEAN THE FILTERS

Warning! Before maintenance,

deactivate the appliance and

disconnect the mains plug from the

mains socket.

Dirty filters and a clogged spray arm

decrease the washing results. Make a

check regularly and, if necessary, clean

them.

1. Turn the fine filter (B) counterclockwise

and remove it out from the main filter

(A).

10 electrolux

2. To remove the coarse filter (C), hold

tightly the fine filter (B) and press the

two sides of the coarse filter (C).

3. Pull the coarse filter (C) out of the fine fil-

ter (B).

4. Fully wash the two filters with water and

a brush.

5. Remove the main filter (A) and fully wash

it with water.

6. Put the main filter (A) in its initial posi-

tion. Make sure that it assembles cor-

rectly.

7. Put the fine coarse filter (C) in the fine fil-

ter (B). Make sure that they assemble

correctly in each other.

8. Put the fine filter (B) in the main filter (A)

and turn it clockwise until it locks.

Caution! Do not use the appliance

without the filters.

Make sure that the installation of the fil-

ters is correct. An incorrect position of

the filters will cause bad washing re-

sults and damage to the appliance.

TO CLEAN THE SPRAY ARM

Do not remove the spray arm.

If the holes in the spray arm become clog-

ged, remove remaining parts of soil with a

thin pointed object.

TO CLEAN THE EXTERNAL SURFACES

Clean the external surfaces of the appliance

and control panel with a moist soft cloth.

Only use neutral detergents.

Do not use abrasive products, abrasive

cleaning pads or solvents (e.g. acetone).

WHAT TO DO IF…

The start of the appliance does not occur or

it stops during operation.

First try to find a solution to the problem (re-

fer to the table). If not, contact the service

centre.

With some malfunctions, alarm codes

show:

The indicator of the programme ‘Rinse & Hold’

flashes very quickly.

An intermittent acoustic signal operates for ap-

proximately 30 seconds.

The appliance does not fill with water.

The indicator of the programme ‘Delicate 45°’

flashes very quickly.

An intermittent acoustic signal operates for ap-

proximately 30 seconds.

The anti-flood device is on.

Warning! Deactivate the appliance

before you do the checks.

electrolux 11

Problem Possible cause Possible solution

The programme does not start. The mains plug is not connec-

ted in the mains socket.

Connect the mains plug.

The appliance door is open. The appliance door is open.

The fuse in the fuse box is

damaged.

Replace the fuse.

The delay start is set. Cancel the delay start or wait

until the countdown is comple-

ted.

The appliance does not fill with

water.

The water tap is closed. Open the water tap.

The water pressure is too low. Contact your local water au-

thority.

The connection of the water in-

let hose is not correct.

Make sure that the connection

is correct.

The water inlet hose is dam-

aged.

Make sure that the water inlet

hose has no damages.

The appliance does not drain

the water.

The connection of the water

drain hose is not correct.

Make sure that the connection

is correct.

The filters are clogged. Make sure that the filters are

clean.

Kitchen sink is clogged. Make sure that the kitchen sink

drains correctly, if not contact a

plumber.

The anti-flood device is on. Close the water tap and con-

tact the service centre.

After the check, activate the appliance. Set

and start the programme again.

If the problem occurs again, contact the

service centre.

If other alarm codes show, contact the

service centre.

The necessary information for the service

centre is on the rating plate.

Record this information:

– Serial number

(SN.) ..............................................

THE WASHING AND THE DRYING RESULTS ARE NOT SATISFACTORY

Problem Possible cause Possible solution

The dishes are not clean. The selected programme was

not applicable for the type of

load and the degree of soil.

Make sure that the programme

is applicable for the type of load

and the degree of soil.

The basket was not loaded

correctly, water did not touch

all surfaces.

Load the basket correctly.

The spray arm could not turn

freely because of incorrect ar-

rangement of the load.

Make sure that an incorrect ar-

rangement of the load does not

cause a blockage of the spray

arm.

The filters are clogged. Make sure that the filters are

clean.

The filters are not correctly as-

sembled and installed.

Make sure that the filters cor-

rectly assembled and installed.

12 electrolux

Problem Possible cause Possible solution

The quantity of detergent was

not sufficient or missing.

Make sure that the quantity of

detergent is sufficient.

Limescale particles on the

dishes.

The salt container is empty. Fill the salt container with dish-

washer salt.

The salt container cap is not

closed correctly.

Make sure that the salt contain-

er cap is closed correctly.

There are streaks, milky stains,

or a bluish layer on glasses and

dishes.

Rinse aid dosage is too high. Decrease the rinse aid dosage.

Dry water drop stains on

glasses and dishes.

Rinse aid dosage is too low. Increase the rinse aid dosage.

The detergent can be the

cause.

Use a different brand of deter-

gent.

The dishes are wet. You have set a programme

without a drying phase.

Set a programme with the dry-

ing phase.

The dishes are wet and dull. The rinse aid dispenser is emp-

ty.

Fill the rinse aid dispenser with

rinse aid.

TECHNICAL DATA

Dimensions Width 550 mm

Height 438 mm

Depth 500 mm

Electrical connection Refer to the rating plate

Voltage 220-240 V

Frequency 50 Hz

Water supply pressure

Minimum 0.03 MPa

Maximum 1 MPa

Capacity Place settings 6

Power consumption Left-on mode 0.34 W

Off-mode 0.29 W

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

ENVIRONMENT CONCERNS

The symbol on the product or on its

packaging indicates that this product may

not be treated as household waste. Instead

it should be taken to the appropriate

collection point for the recycling of electrical

and electronic equipment. By ensuring this

product is disposed of correctly, you will

help prevent potential negative

consequences for the environment and

human health, which could otherwise be

caused by inappropriate waste handling of

this product. For more detailed information

about recycling of this product, please

contact your local council, your household

waste disposal service or the shop where

you purchased the product.

Recycle the materials with the symbol

Put the packaging in applicable containers

to recycle it.

electrolux 13

INSTALLATION

WATER DRAIN CONNECTION

max. 750 mm

• Connect the water drain hose into a drain

pipe with minimum diameter of 40 mm

• Put the water drain hose directly into the

sink. Use the special plastic support

The water drain hose must be less than

750 mm from the bottom of the appliance

to prevent problems during the draining

phases.

Remove the sink plug when the appliance

drains the water to prevent that the water

goes back into the appliance.

The extension for the water drain hose

must not be longer than 2 m. The internal

diameter must not be smaller than the di-

ameter of the drain hose.

If you connect the water drain hose to a

trap spigot under the sink, remove the plas-

tic membrane (A). If you do not remove the

membrane, remaining food can cause a

blockage in the drain hose spigot

14 electrolux

electrolux 15

Electrolux ESF2200DW User manual

Related papers

Other documents