www.bauknecht.eu/register
Health & Safety, Use & Care and Installation guide
2
ENGLISH .......................................3
3
EN
ENGLISH
HEALTH & SAFETY, USE & CARE
and INSTALLATION GUIDES
Health and Safety guide
SAFETY INSTRUCTIONS ..............................................................................5
IMPORTANT TO BE READ AND OBSERVED ..............................................................5
SAFEGUARDING THE ENVIRONMENT ................................................................8
DECLARATION OF CONFORMITY .....................................................................9
Use and Care guide
PRODUCT DESCRIPTION ............................................................................10
APPLIANCE ..........................................................................................10
CONTROL PANEL .....................................................................................10
DOOR ...............................................................................................11
DRUM LIGHT (if available) ............................................................................11
AVAILABLE ACCESSORIES ............................................................................11
HOW TO USE THE APPLIANCE .......................................................................12
FIRST TIME USE ......................................................................................12
DAILY USE ...........................................................................................13
PROGRAMMES .......................................................................................15
REFRESHING BALL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
OPTIONS ............................................................................................19
Index
THANK YOU FOR BUYING A BAUKNECHT PRODUCT.
In order to receive a more complete assistance,
please register your appliance on www.bauknecht.eu/register
4
FUNCTIONS ..........................................................................................20
INDICATORS .........................................................................................22
ENERGY SAVING .....................................................................................23
CLEANING & MAINTENANCE ........................................................................24
EMPTYING THE WATER TANK ..........................................................................24
CLEANING THE DOOR FILTER .........................................................................25
CLEANING THE BOTTOM FILTER .......................................................................26
CLEANING THE OUTSIDE OF THE DRYER ...............................................................28
REVERSING THE DOOR STOP ..........................................................................29
TROUBLESHOOTING GUIDE & AFTER-SALES SERVICE ..............................................31
FAILURE INDICATOR AND MESSAGES ..................................................................33
TRANSPORT AND HANDLING .........................................................................35
AFTER-SALES SERVICE ................................................................................36
Installation guide ...................................................................................37
5
EN
SAFETY
INSTRUCTIONS
IMPORTANT TO BE READ AND OBSERVED
Before using the dryer carefully
read, Health and Safety and
Use and Care guides.
Keep these instructions close
at hand for future reference.
YOUR SAFETY AND SAFETY
OF OTHERS IS VERY IMPOR-
TANT.
This manual and the dryer
itself provide important safety
warnings, to be read and ob-
served at all times.
This is the safety alert symbol.
This symbol alerts you to po-
tential hazards that can kill or
hurt you and others.
All safety messages will follow
the safety alert symbol or the
word DANGER or WARNING.
These words mean:
Indicates a hazardous situation
which, if not avoided, will
cause serious injury.
Indicates a hazardous situation
which, if not avoided, could
cause serious injury.
DANGER
WARNING
All safety warnings give spe-
cic details of the potential risk
presented and indicate how to
reduce risk of injury, damage
and electric shock resulting
from improper use of the dryer.
Carefully observe the following
instructions.
Failure to observe these in-
structions may lead to risks.
The Manufacturer declines any
liability for injury to persons or
animals or damage to property
if these advices and precau-
tions are not respected.
Very young (0-3 years) and
young children (3-8 years) shall
be kept away unless continu-
ously supervised.
Children from 8 years old
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge can
use this dryer only if they are
supervised or have been given
instructions on safe appliance
use and if they understand the
hazards involved. Children shall
not play with the dryer. Clean-
ing and user maintenance shall
not be made by children with-
out supervision.
Items that have been soiled
with substances such as cook-
ing oil, acetone, alcohol, pet-
rol, kerosene, spot removers,
turpentine, waxes and wax
removers should be washed
in hot water with an extra
amount of detergent before
being dried in the tumble
dryer.
Items such as foam rubber (la-
tex foam), shower caps, water-
proof textiles, rubber backed
articles and clothes or pillows
tted with foam rubber pads
should not be dried in the tum-
ble dryer.
Remove all objects from
pockets such as lighters and
matches.
Do not use the tumble dryer if
chemicals have been used for
cleaning.
Oil-soaked items ignite sponta-
neously, especially when
exposed to heat sources such
as in a tumble dryer. The items
become warm, causing an
oxidation reaction in the oil.
Oxidation creates heat. If the
heat cannot escape, the item
can become hot enough to
catch re. Piling, stacking or
storing oil-soaked items can
prevent heat from escaping
and so create a re hazard.
Never stop a tumble dryer
before the end of the drying
cycle unless all items are quick-
ly removed and spread out so
that the heat is dissipated.
WARNING
Health and Safety guide
6
The last phase of the drying cy-
cle is done without heat (cool
down phase), to assure that the
laundry stays at a temperature
level which is not leading to a
damaging of the laundry.
If you want to stack the dryer
on a washing machine, rst
contact our After-Sales Ser-
vice to verify if this is possible.
Stacking of a dryer is only
admitted if the dryer is safely
xed on the washing machine
by using an appropriate stack-
ing kit.
INTENDED USE
OF THE PRODUCT
This dryer is designed solely
for domestic usage. To aim
the dryer as professional use is
forbidden. The manufacturer
declines all responsibility for
inappropriate use or incorrect
setting of the controls.
CAUTION: The dryer is not
intended to be operated by
means of an external timer or
separate remote control sys-
tem.
Do not use the dryer outdoors.
Do not store explosive or
ammable substances such as
aerosol cans and do not place
or use gasoline or other am-
mable materials in or near the
dryer: a re may break out
if the dryer is inadvertently
switched on.
INSTALLATION
Installation and repairs must
be carried out by a qualied
technician, in compliance with
the manufacturer’s instructions
and local safety regulations. Do
not repair or replace any part
of the dryer unless specically
stated in the user manual.
Children should not perform
installation operations. Keep
children away during instal-
lation of the dryer. Keep the
packaging materials (plastic
bags, polystyrene parts, etc.)
out of reach of children, during
and after the installation of the
dryer.
Use protective gloves to per-
form all unpacking and instal-
lation operations.
After unpacking the dryer,
make sure that it has not been
damaged during transport. In
the event of problems, con-
tact the dealer or your nearest
After-sales Service.
The dryer must be handled
and installed by two or more
persons.
Keep children away during
installation of the dryer.
The dryer must be discon-
nected from the power supply
before carrying out any instal-
lation operation.
During installation, make sure
the dryer does not damage the
power cable.
Only activate the dryer when
the installation procedure has
been completed.
After installation of the device
to wait a few hours before
starting it, to acclimatize to the
environmental conditions of
the room.
Do not install your dryer where
it may be exposed to extreme
conditions, such as: poor ven-
tilation, high temperature or
below 5°C or above 35°C.
The dryer must not be installed
behind a lockable door, a slid-
ing door or a door with a hinge
on the opposite side to that of
the tumble dryer, in such a way
that a full opening of the tum-
ble dryer door is restricted.
The dryer must be placed with
the back towards a wall, to
avoid injuries by touching the
rear panel, which can become
hot during the drying process.
Do not install the dryer in
rooms with poor ventilation. If
you want to install it in a small
storage room, toilet, bathroom
or similar, assure a good venti-
lation (open door, ventilation
grid or slot larger than 500 cm²).
When installing the dryer make
sure that the four feet are
stable and resting on the oor,
adjusting them as required,
and check that the dryer is per-
fectly level using a spirit level.
If possible use a hose to drain
the water directly into the
domestic plumbing system.
This will avoid having to empty
the water container at the end
of each drying cycle, since the
condensation water can be
directly drained away.
Take care not to install the
dryer on a deep-pile carpet.
If, due to lack of space, the
dryer must be installed directly
next to a gas or coal stove, a
heat insulating plate (85 x 57 cm)
must be installed in between
and the side of the plate fac-
ing the stove must be covered
with aluminium foil.
7
EN
colour embossed in words on
the base of the plug.
Replacement fuse covers are
available from your local elec-
trical store.
For the Republic of Ireland
only
The information given in
respect of Great Britain will fre-
quently apply, but a third type
of plug and socket is also used,
the 2-pin, side earth type.
Socket outlet / plug (valid for
both countries)
If the tted plug is not suitable
for your socket outlet, please
contact After-sales Service for
further instruction. Please do
not attempt to change plug
yourself. This procedure needs
to be carried out by a qualied
technician in compliance with
the manufactures instructions
and current standard safety
regulations.
CORRECT USE
Do not exceed the maximum
load allowed. Check the maxi-
mum load allowed in the pro-
gramme chart.
Do not dry unwashed items in
the tumble dryer.
Do not overdry the laundry.
Take care that no lint or dust is
accumulated around the dryer.
Fabric softeners, or similar
products, should be used as
specied by the fabric softener
instructions.
Do not operate this dryer if it
has a damaged mains cord or
plug, if it is not working prop-
erly, or if it has been damaged
or dropped. Do not immerse
the mains cord or plug in wa-
ter. Keep the cord away from
hot surfaces
The electrical components
must not be accessible to the
user after installation.
Do not touch the dryer with
any wet part of the body and
do not operate it when bare-
foot.
ELECTRICAL CONNECTION
FOR GREAT BRITAIN AND
IRELAND ONLY
Fuse replacement.
If the mains lead of this dryer is
tted with a BS 1363A 13amp
fused plug, to change a fuse in
this type of plug use an A.S.T.A.
approved fuse to BS 1362 type
and proceed as follows:
1. Remove the fuse cover (A)
and fuse(B).
2. Fit replacement 13A fuse into
fuse cover.
3. Ret both into plug.
Important:
The fuse cover must be retted
when changing a fuse and if
the fuse cover is lost the plug
must not be used until a cor-
rect replacement is tted.
Correct replacement are identi-
ed by the colour insert or the
The dryer is not designed for
built-in installation.
The dryer can be installed un-
der a worktop, provided that
adequate ventilation of the
dryer is assured. Install a ven-
tilation grid (minimum 45 cm
x 8 cm), in the rear part of the
worktop under which the dryer
is installed.
ELECTRICAL WARNINGS
Make sure the voltage speci-
ed on the rating plate corre-
sponds to that of your home.
For installation to comply with
current safety regulations, an
omnipolar switch with mini-
mum contact gap of 3mm is
required.
Regulation require that the
dryer is earthed.
For dryers with tted plug, if
the plug is not suitable for you
socket outlet, contact a quali-
ed technician.
Do not use extension leads,
multiple sockets or adapters.
Do not connect the dryer to a
socket which can be operated
by remote control.
The power cable must be long
enough for connecting the
dryer, once tted in its hous-
ing, to the main power supply.
Do not pull the power supply
cable.
If the power cable is damaged
it must be replaced with an
identical one. The power cable
must only be replaced by a
qualied technician in compli-
ance with the manufacturer
instruction and current safety
regulations. Contact an author-
ized service centre.
8
SCRAPPING OF
HOUSEHOLD APPLIANCES
When scrapping the dryer,
make it unusable by cutting o
the power cable and removing
the doors and shelves (if pre-
sent) so that children cannot
easily climb inside and become
trapped.
This dryer is manufactured
with recyclable
or reusable materials. Dispose
of it in accordance with local
waste disposal regulations.
For further information on the
treatment, recovery and recy-
cling of household electrical
appliances, contact your com-
petent local authority, the col-
lection service for household
waste or the store where you
purchase the dryer.
SAFEGUARDING
THE ENVIRONMENT
For dryer models with heat-
pump technology:
This dryer contains uorinated
greenhouse gas (R134a). The
circuit containing this gas is
hermetically sealed. The elec-
trical switchgear has a tested
leakage rate of less than 0,1%
per year.
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is
100% recyclable and is marked
with the recycle symbol:
The various parts of the pack-
aging must therefore be dis-
posed of responsibly and in full
compliance with local authori-
ty regulations governing waste
disposal.
This dryer is marked in compli-
ance with European Directive
2012/19/EU, Waste Electrical
and Electronic Equipment
(WEEE).
By ensuring this product is
disposed of correctly, you will
help prevent potential nega-
tive consequences for the en-
vironment and human health,
which could otherwise be
caused by inappropriate waste
handling of this product.
This symbol
on the product or on the
accompanying documentation
indicates that it should not be
treated as domestic waste but
must be taken to an appropri-
ate collection centre for the
recycling of electrical and
electronic equipment.
CLEANING AND
MAINTENANCE
The dryer must be discon-
nected from the power supply
before carrying out any clean-
ing or maintenance operation.
Never use steam cleaning
equipment.
9
EN
DECLARATION
OF CONFORMITY
This dryer has been designed,
constructed and distributed
in compliance with the safety
requirements of European
Directives:
• 2006/95/EC Low Voltage
Directive
• 2004/108/EC Electromagnetic
Compatibility Directive.
ENERGY SAVING TIPS
Always dry a full load, depend-
ing on the type of laundry and
the programme/drying time.
For more detailed information,
see the programme chart.
By preference use the maxi-
mum spin speed allowed by
your washing machine, since
draining the water mechanical-
ly requires less energy. You will
save time and energy when
running your drying cycle.
Always select the correct
programme/drying time for
the load in order to obtain the
desired drying results.
Select the ‘Gentle’ option only
in case of drying small loads.
When drying cotton, for exam-
ple, dry Iron Dry and Cupboard
Dry loads together. Start with
the Iron Dry programme/dry-
ing time setting, remove the
laundry to be ironed at the
end of that cycle and dry the
remainder of the load on the
Cupboard Dry setting.
10
PRODUCT
DESCRIPTION
APPLIANCE
CONTROL PANEL
1. Worktop
2. Control panel
3. Water tank
4. Door
5. Door handle
6. Door lter (behind door)
7. Bottom lter (behind ap)
8. Adjustable feet (4)
Use and Care guide
1. On/O button (Reset if
long pressed)
2. Programme button
(Settings button if long
pressed)
3. Cycle end alert
4. Key lock button
5. Steam refresh button
6. Knob (Turn to select /
Press to conrm)
7. Start delay button
8. Drying / Airing time
button
9. Drying level button
10. Options button
11. Start/Pause button
12. Display
13. Programmes area
1.
2.
4.
6.
8.
7.
5.
3.
1. 2. 7.3. 8.4. 9.5. 10.
12.13.
11.6.
11
EN
DOOR
DRUM LIGHT (if available)
AVAILABLE
ACCESSORIES
To open the door, pull the handle.
If you interrupt a running programme by opening
the door, the programme will be reset if the dryer
door is not closed again within one minute.
• During programme selection: the light goes on for
laundry loading
• After programme start: the light fades on and o
while the laundry load is detected.
• After programme end, when you open the door,
the light goes on for a while for unloading the
laundry. Then it goes o to save energy; touch any
button to switch it on again.
Contact our After-Sales Service to check if the following
accessory is available for your washing machine and
dryer combination.
STACKING KIT SHELF
by which your dryer can be xed on top of your
washing machine to save space and to facilitate
loading and unloading your dryer in the higher
position.
To close the door, hold the handle and push so that
you can hear it click shut.
12
FIRST TIME USE
HOW TO USE
THE APPLIANCE
1. CHECK WATER TANK
Make sure that the water tank is correctly inserted
2 . CHECK DRAIN HOSE
Make sure that the drain hose on the back of the
dryer is xed, either to the dryer’s water tank or to
your domestic sewage system (see INSTALLATION
GUIDE).
13
EN
DAILY USE
WARNING
Make sure that no lighters
or matches are left in
clothing.
Make sure that the
laundry is not soaked with
ammable liquids.
1. LOAD THE LAUNDRY
Respect your items’ care labels; make sure
that the items to be dried are suitable for
tumble drying.
Drying Care Labels
The dots indicate the temperature degree for
drying the laundry.
Normal temperature
Reduced temperature
Do not tumble dry
Open the door and load the laundry. Observe
the maximum load sizes given in the section
Programmes.
2. CLOSE THE DOOR
Make sure that no items get stuck between
the door glass and door lter.
Close the door so that you can hear it click
shut.
3. SWITCH ON DRYER
Press the On/O button « until the pro-
gramme button lights up. An animation
appears on the display, followed by a beep.
Afterwards the dryer is ready to be operated.
4. SET THE DESIRED PROGRAMME
GUIDED MODE the button light will guide
you through setting your programme in the
following order: selection of programme /
drying time (ONLY if Drying time or Airing
programme is selected) / dryness level (only if
selectable / adjustable) / options. As soon as
you conrm a selection by pressing the knob,
the button light will jump to the next step.
Select programme:
Make sure that the Programme button « lights
up.
Turn the knob to select the desired pro-
gramme. The indicator next to the selected
programme lights up.
Conrm the desired programme by pressing
the knob.
Find more information regarding pro-
grammes in section PROGRAMMES, OP-
TIONS AND INDICATORS.
Select Drying time, if needed
Only if you have selected programme Drying
time or Airing «, you can set the desired drying
time from a minimum of 10 minutes to maxi-
mum 180 minutes (three hours).
Make sure that the Drying time button lights
up.
Turn the knob to select the desired drying /
airing time. Conrm it by pressing the knob.
14
Set dryness level, if needed
If you want to change the dryness level, make
sure that the Dryness level button « lights up.
Turn the knob to select the desired dryness
level, afterwards press the knob to conrm.
Select options, if needed
If you want to select additional options,
make sure that the Options button « lights
up. The options which are selectable for your
programme are indicated by a lighting arrow.
Turn the knob to select the desired options.
The symbol of the selected option blinks. To
conrm it, press the knob.
Some options / functions can be selected by
directly pressing the button.
Refer to section OPTIONS, FUNCTIONS
AND INDICATORS for more information.
CUSTOM MODE
After you have switched on the dryer, you are
not forced to follow the GUIDED MODE.
It is up to you which order you choose to
set your programme. To choose a setting,
rst press the relevant button, then turn the
knob to select, and nally press the knob to
conrm.
The variety of options and dryness levels
depends on the programme selected.
Therefore it is recommended to start set-up
by programme selection.
5. START PROGRAMME
Press and hold Start/Pause « until the button
lights up solidly; the programme starts.
The duration can be recalculated and
adapted in the course of the programme.
During such phases, an animation appears on
the display.
6. CHANGE THE SETTINGS OF A
RUNNING PROGRAMME, IF NEEDED
You can still change some settings after a
programme has started:
• Adjust drying time (only if programme
Drying time or Airing is selected)
• Adjust or cancel Start delay, if a delay option
is already in progress.
• Add or cancel an option, provided the
progress of the programme still allows it.
Press the relevant button. The selected
setting blinks for a few seconds.
While blinking, you can adjust the setting
by turning the knob. If the value or setting
stopped blinking, press the button again.
Press the knob to conrm the modication.
If you do not conrm, the modication is
conrmed automatically — the modied
setting stops blinking.
The programme continues automatically.
To change the settings of a running
programme or delay, you can also:
• press Start/Pause to put the running
programme on hold
• change your settings
• press Start/Pause again to continue the
programme.
7. CANCEL A RUNNING PROGRAMME, IF
NEEDED
Press and hold the On/O button « until “rES”
appears on the display.
WARNING
After cancelling a running programme,
quickly remove all items and spread
them out so that the heat is dissipated.
8. SWITCH OFF THE DRYER AFTER
PROGRAMME END
At the end of the programme, “End” appears
on the display. Press On/O button « to switch
o the dryer. Open the door and take out
your laundry.
The dryer switches o automatically in about
a quarter of an hour after programme end, to
save energy.
If not switched o right after programme
15
EN
end, the dryer will tumble the laundry for
about 10 minutes, to prevent creasing. The
display shows an animation.
9. EMPTY WATER TANK / CLEAN DOOR
FILTER / CLEAN BOTTOM FILTER
Empty
• the water tank after each programme
• the door lter after each programme
• the bottom lter after every fth
programme.
Refer to section CARE AND MAINTENANCE
PROGRAMMES
The dots indicate the temperature degree for dry-
ing the laundry.
Normal temperature
Reduced temperature
Do not tumble dry
PROGRAMME Type of Wash
and Recommendations
Care
Labels
Regulations
ECO COTTON
Standard cotton programme, suitable
to dry normally wet cotton laundry.
Most ecient programme in terms of
energy consumption for drying cotton
laundry. The values on the Energy
Label are based on this programme.
max. load (kg): max
default programme
duration (h): 1:40
selectable options:
Fresh care
COTTON For drying cotton laundry. max. load (kg): max
default programme
duration (h): 1:55
selectable options:
Steam option,
Dryness level, Fresh
care, Gentle, Rapid
MIXED For drying mixed laundry made of
cotton, linen, articial bres and their
blends.
max. load (kg): 2.0
default programme
duration (h): 1:00
selectable options:
Steam option, Fresh
Care, Gentle
16
PROGRAMME Type of Wash
and Recommendations
Care
Labels
Regulations
SYNTHETICS
For drying laundry made of synthetic
bres.
max. load (kg): 3.5
default programme
duration (h): 1:00
selectable options:
Steam option,
Dryness level,
Fresh care, Gentle
DELICATES For drying delicate laundry which
needs gentle treatment.
max. load (kg): 2.5
default programme
duration (h): 1:00
selectable options:
Fresh care
WOOL EXCELLENCE For drying woolens labeled with the
Woolmark TOTAL EASY CARE WOOL.
max. load (kg): 1.0
default programme
duration (h): 1:00
selectable options: ---
BIG ITEMS For drying big laundry items, such as
bathmats, blankets etc.
max. load (kg): 3.0
default programme
duration (h): 2:00
selectable options:
Fresh care
AIRING For airing, refreshing and loosening
up laundry for 30 minutes, without
heating.
max. load (kg): max
default programme
duration (h): 0:15
selectable options:
Drying time, Fresh
care
17
EN
PROGRAMME Type of Wash
and Recommendations
Care
Labels
Regulations
STEAM REFRESH
For refreshing laundry with steam.
Specically designed to refresh and
remove odours from dry and
clean casual garments like shirts,
blouses, trousers made out of
cotton, synthetics and their blends.
To help removing odours, use the
refreshing ball (see separate section
REFRESHING BALL).
After programme end, the garments
shall be removed immediately and
put on clothes hangers to minimise
wrinkling.
max. load (kg): 1.5
default programme
duration (h): 0:30
selectable options:
---
DRYING TIME Time-restricted drying programme.
Select programme duration by
option Drying time.
For all fabrics appropriate for tumble
drying. Suitable to add an
additional short drying phase after
programme end.
Refer to OPTIONS, FUNCTIONS AND
INDICATORS / option Drying
time for more information.
max. load (kg): max
default programme
duration (h): 0:10
selectable options:
Drying time, Fresh
care
max = maximum capacity of the dryer
Programme durations indicated in the table are
default values. The programme duration mainly
depends on the humidity level of the laundry and
the volume of the laundry load. For that reason,
the real programme duration can deviate from the
indicated values.
18
This accessory is designed to be used:
With Water: in programme Steam Refresh, to
provide the necessary humidity
REFRESHING BALL
USE WITH PROGRAMME STEAM REFRESH:
1. Turn the cap to open the refreshing ball.
1
2
2. Fill it with water up to the “max” mark and
close it again.
MAX
1
2
3. Place it in the middle of the dry laundry, with
the holes up. Then start the programme.
Instead of using the refreshing ball, the laundry
can be slightly humidied with a water spray bottle
before loading it into the drum.
The refreshing ball is a consumable component.
In case it shows any traces of wear or damage in the
course of time, a spare part can be obtained from
our After-Sales Service.
19
EN
STEAM OPTION
FRESH CARE
GENTLE
DRYING TIME OPTION
DRYNESS LEVEL
Minimises creasing of garments made
of cotton, synthetics and their blends
by adding a humidifying phase at the
end of the drying cycle.
Use the option with small loads only,
unload the garments from the dryer
immediately after programme end
and put them on clothes hangers.
The humidity level automatically
adjusts to “cupboard dry” and cannot
be changed with this option.
Helps to prevent creasing if you
cannot unload the laundry soon after
programme end.
The dryer starts to tumble the laundry
periodically a few minutes after
programme end. This tumbling will
last up to approximately 12 hours after
end of the programme.
You can stop it at any time by
switching o the dryer with the On/
O button.
Enables a more gentle treatment of
the laundry by reducing the drying
temperature.
To adjust the desired drying time if
Drying time or Airing programme has
been selected.
Press the button; the light goes on,
and the drying time which was used
last appears on the display.
Turn the knob to select the desired
drying time from a minimum of 10
minutes up to maximum 180 minutes,
afterwards press the knob to conrm.
To select the desired dryness level for
the laundry load.
Press the button; the light goes on.
Turn the knob to select the desired
dryness level.
Choose between:
Iron Dry (suitable to be ironed
after the drying cycle, therefore still
slightly humid)
Cupboard Dry (dry enough to be
put in a cupboard at the end of the
drying cycle)
Extra Dry (maximum dryness
level) and conrm by pressing the
knob.
The dryness level is adjustable in
programmes Cotton and Synthetics.
OPTIONS WHICH ARE DIRECTLY SELECTABLE
BY PRESSING THE RESPECTIVE BUTTON
OPTIONS SELECTABLE WITH THE OPTIONS
BUTTON
RAPID Enables quicker drying by shortening
the programme duration.
OPTIONS
20
FUNCTIONS
ON/OFF
KNOB
START/PAUSE
KEY LOCK
START DELAY
To switch the dryer on: press the
button until the Start/Pause button
lights up.
To switch the dryer o after
programme end: press the button
until the lights go o.
To cancel a running programme:
press and hold the button until “rES”
appears on the display.
To select and conrm programmes,
options and settings.
Turn to select
Push to conrm
To start the programme, after you
have nished your settings
To pause a running programme
To continue a paused programme
This function allows you to lock the
buttons and the knob of the control
panel against unwanted operation, for
example by small children.
The dryer must be switched on.
Press and hold the Key lock button
until button lights up.
Knob and buttons are locked now.
The only working function is On/O to
switch the dryer o.
The key lock remains active also if you
switch o and on again the dryer.
To unlock the buttons/knob, press and
hold the option button again until the
button light goes o.
Enables to have the laundry ready at a
particular time by moving the start of
the programme to a later time.
Select programme and options.
Press the Start delay button – the
button lights up.
Turn the knob to select a delay up to
23 hours. and conrm it by pressing
the knob
Press Start / Pause - the display shows
the countdown of
the delay until start of the
programme. The Start / Pause
button lights up. A sound by
activation of the pump may
occur.
The colon on the display between
hours and minutes blinks.
WARNING
After cancelling a running
programme, quickly remove
all items and spread them
out so that the heat is
dissipated.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/