Whirlpool is a registered trademark of Whirlpool USA.
GB - AWE 6105D
5019 300 00035
Programme
Tempe-
rature
Care
Labels
Max.
Load
kg
Type of wash / Notes
- Respect the manufacturer's recommendations on the care label
Detergents and additives Options Spin
Pre-
wash
Main
wash
Softener Pre-
wash
Rapid Finish
on time
Intensive
rinse
Tumble
fresh
Variable
Spin
Max
spin
speed
rpm
Mixed
15 - 60°C 3.0
Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their
blends.
Effective one-hour programme. Make sure to wash only similar colours together in one wash load.
– Yes
i
– –
i i i i i
max.
Fabrics
Cotton
15 - 95°C 6.5
Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and
linen.
i
Yes
i i i i i i i i
max.
Synthetics
15 - 60°C 3.0
Normally soiled garments made of artificial fibres (like polyester, polyacryle, viscose etc.) or
their blends with cotton.
i
Yes
i i i i i i i i
max.
Delicates
15 - 40°C 1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.
i
Yes
i i
–
i i
–
i i
1000
1)
Wool /
Handwash
15 - 40°C 1.0
Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles
made of silk (keep to care label!), linen, wool and viscose marked as handwashable.
– Yes
i
– –
i i
–
i i
1000
1)
Sport
15 - 30°C 3.0
Normally soiled and sweaty sportswear made of cotton jersey or microfibres.
This programme includes a prewash cycle – you can add detergent also to the prewash chamber. Do
not add any softener.
i
Yes –
i i i i i i i
max.
Colours
White
15 - 60°C 6.5
Normally to heavily soiled and robust cotton laundry.
Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in
addition to your detergent
– Yes
i
– –
i i i i i
max.
Light colours
15 - 60°C 4.0
White and pastel shaded garments made of delicate fabrics.
Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if
necessary also stain removers or bleaches on oxygen basis. Do not use liquid detergent.
i
Yes
i i i i i i i i
1000
1)
Dark
15 - 60°C 4.0
Black and dark garments made of cotton, cotton blends and polyester.
Special programme to reduce colour fading and local discolouration. Prefer to use a liquid detergent for
dark garments with this programme.
i
Yes
i i i i i i i i
max.
Eco
coCotton
40 - 60°C 6.5
Normally soiled cotton laundry.
Most favourable programme in terms of combined water and energy consumption for washing cotton
laundry. - Reference programme for the Energy Label.
– Yes
i
– – –
i i i i
max.
Aqua co
15 - 40°C 2.5
Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.
Saving programme with a very low water consumption. Use liquid detergent and the lowest
recommended amount for 3kg laundry. Do not use softener.
– Yes – – –
i i
–
i i
max.
Speed 15´
15 - 30°C 3.0
Briefly worn clothing made of cotton, artificial fibers and blends with cotton.
Refresh programme. Use lowest recommended detergent amount.
– Yes
i
– –
i i
–
i i
max.
Spin
-
-
6.5
In this programme spinning is intensive.
Same as the spin cycle in the “Cotton” programme.
– – – – – –
i
–
i i
max.
Rinse & Spin
-
-
6.5
Rinse and intensive spin programme.
Same as the last rinse and the final spin in the “Cotton” programme.
– –
i
– – –
i i i i
max.
PROGRAMME CHART
I. “Door open” indication
J. “Reset/Drain” button
This washing machine is equipped with automatic
safety functions which detect and diagnose faults
at an early stage and react appropriately:
K. “Service” indication
L. “Water tap closed” indication
M. “Clean filter” indication
A. Programme selector
B. “Temperature” button
C. Temperature display
D. “Spin” button
E. “Finish on time” button
F. Time display
G. “Start(Pause)” button
H. Programme sequence indicator
i: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.
Start
°C
Temp.°CPrewash
Tumble
fresh
Finish
on time
Intensive
rinse
h. min.
Sport
Rapid
Aqua co
Synthetics
Wool/Handwash
Mixed
Delicates
White
Light colours
Dark
co Cotton
Rinse & Spin Spin
Speed 15’
Off
Prewash
Wash
Spin/Drain
Rinse
Rinse hold
Service
Water tap
closed
Clean pump
Door open
(Pause)
Reset/
Drain
Cotton
Variable
spin
A
B
H
F
EG
C
D
J
I
K
L
M
5019 300 00035
Whirlpool is a registered trademark of Whirlpool USA.
• Do not use liquid detergent for the main wash when
activating the Prewash option.
“Rapid” button
• Enables quicker washing by shortening the
programme duration.
• Recommendable for small loads or only lightly soiled
laundry.
“Colours 15° ” button
• Saves energy used for water heating while
maintaining a good wash result.
• Supports colour maintenance when washing coloured
laundry.
• Recommendable for lightly soiled laundry without
stains.
• Make sure that your detergent is suitable for cold
wash temperatures.
• Not selectable for Cotton 70 - 95°C.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
soft water, washing baby linen and helping people
with allergies.
“Tumble fresh” button
• Select this option if you cannot unload the laundry
soon after programme end, or if you tend to forget
the laundry in your washing machine. It will help to
keep your laundry fresh.
• The washing machine will start to tumble the laundry
periodically after programme end.
• The light of the “Tumble fresh” button will blink while
this function is active, and the display will show an
animation.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lights up. When the combination
of programme and additional option(s) is not possible,
the indication lights switch off automatically. Unsuitable
combinations of options are deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example
sand, granular dirt). Increases the cycle time by
approximately 15 min.
• The periodic tumbling will last up to approximately
12 hours after the end of your wash programme, and
you can stop it at any time by pressing the “Tumble
fresh” button. It will last a while until you can open
the door.
• After the “Tumble fresh” period has run out, the
display indicates “End”.
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning
is cancelled, and the water is drained out only.
However, intermediate spin peaks remain during the
rinse phase.
ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME
Before starting and after end of a programme, the lamp
lights to show the the lid can be opened. As long as a
wash programme is running, the lid remains locked and
must on no account be forced open. In case you have
an urgent need to open it during a running programme,
refer to “Cancel a running programme before the end”.
PROGRAMME START
FINISH ON TIME
With this function you can postpone your programme
to complete at a later time: press the button to select in
how many hours the programme shall be finished. Thus,
it allows you to have your laundry ready at a particular
time and to profit from more favorable energy rates
during the night, for example.
• The time until the “Cycle end” can be selected in full
hour time segments (1 to 24 h). When you press the
button, the shortest possible time will be displayed;
keep on pressing the button to loop through all the
available times. To remove it again, keep on pressing
the button until you see the value “0:00”.
• When you have selected the desired time until the
“Cycle end”, press “Start(Pause)” - the countdown
will begin.
• During the countdown, you can still modify the
programme setting (select or deselect options,
change spin speed etc.). If the modifications prolong
the programme duration so that it overruns the
originally set time until the “Cycle end”, the
programme will start immediately.
• Sometimes the programme may finish before the
selected time until the “Cycle end” has expired (e.g.
for small loads). In this case, the washing machine will
tumble the laundry regularly to keep it fresh, until
the selected “Cycle end” time has expired. During
tumbling, the display will show an animation. The
tumbling phase can be stopped at any time either by
pressing any button or by rotating the programme
selector; the animation will stop and the door will
unlock in about 1 minute as indicated on the display.
FAILURE INDICATIONS
“DOOR OPEN” INDICATION
CONSUMPTION DATA
Power consumption in off-mode 0.11 W / in left-on mode 0.11 W
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with
respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer
to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Standard Cotton programme and basis for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.
Programme
Tempe-
rature
(°C)
Load
(kg)
Water
(l)
Energy
without “Rapid”
(kWh)
Approx. Programme Duration (hrs : min)
without “Rapid” with “Rapid”
Mixed 40 3.0 40 0.45 1:00 –
Cotton 95 6.5 55* 2.00 2:35 2:00
Cotton 60 6.5 51 1.23 2:30 1:45
Cotton 40 6.5 51 0.62 2:25 1:30
Synthetics 60 3.0 50* 0.90 2:05 1:14
Synthetics 40 3.0 46 0.50 1:50 0:59
Delicates 40 1.5 50 0.55 0:45 –
Wool / Handwash 40 1.0 40 0.55 0:35 –
Sport 30 3.0 50 0.45 2:05 1:14
White 40 6.5 51 0.75 2:45 –
Light colours 40 4.0 70 0.55 1:20 1:00
Dark 40 4.0 41 0.58 1:44 1:10
Aqua Eco 40 2.5 19 0.45 1:00 –
Speed 15´ 30 3.0 30 0.15 0:15 –
Eco Cotton** 60 6.5 51 0.85 3:30 –
Eco Cotton** 60 3.25 35 0.72 2:45 –
Eco Cotton 40 6.5 51 0.65 2:30 –
Eco Cotton** 40 3.25 35 0.49 2:00 –
Add detergent as indicated an the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the programme selector to the desired
programme. The display shows the programme
duration in hours and minutes as well as the
predefined temperature. The “Start(Pause)”
button blinks.
2. The temperature can be altered by pressing the
“Temperature” button.
3. The indication lamp of the predefined spin speed
lights up; in case you want to set another spin speed,
press the “Spin” button. If you do not start the
programe soon after having made your choice, the
washing machine will switch off automatically after
about a quarter of an hour. Switch on the washing
machine again by turning the programe selector back
to „Off/O“ and then to the desired programe.
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Water tap closed”
No or not sufficient inlet water.
“Service”
Failure or malfunction of an electrical component.
“Clean pump”
Waste water is not pumped out.
Spin speed on programme sequence indicator
blinks: unbalance during spinning
CANCEL A RUNNING PROGRAMME BEFORE
THE END
The “Reset” button cancels a programme before the
end. Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the door can be
opened.
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
After about a quarter of an hour, the washing
machine will switch off completely to save energy.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open lid and drum and unload the machine.
4. Leave the lid open for some time to allow the interior
of the machine to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start(Pause)” button to pause the
programme. The light blinks.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the “Start(Pause)” button again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.
Open the tap and press the “Start(Pause)” button.
The indication lamp next to the “Start(Pause)” button
lights up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain. When the programme
phase is finised, the corresponding indication goes out.
• Note: If there is a power interruption or if the
appliance is disconnected during the cycle, the
programme will run again from the point where it
was interrupted.
/