Electrolux ESI6100K User manual

Brand: Electrolux

Model: ESI6100K

Category: Dishwashers

Type: User manual

Electrolux ESI6100K is a dishwasher with 12 place settings and adjustable upper basket for loading taller items. It has an A++ energy efficiency rating and uses 10.5 liters of water per cycle. The machine has 5 washing programs, including a Rinse and Hold option which can be used to pre-rinse dishes before a full wash cycle, and a Bio 50° program for heavily soiled dishes. The dishwasher features an adjustable water softener to accommodate different water hardness levels. It also has a salt and rinse aid indicator to alert the user when these items need to be refilled.

Dishwasher

Instruction book

Model ESI 6100

Important safety information 3

Description of the appliance 4

The control panel 4

Before use 5

Setting the water softener 5

Filling with salt 5

Rinse aid 6

Use of detergent 6

Using your appliance 7

Loading your appliance 7

The lower basket 7

The cutlery basket 7

The upper basket 7

Adjusting the height of the upper basket 7

Hints and tips 8

Washing programmes 9

Operating sequence 10

Maintenance and cleaning 11

Internal cleaning 11

Cleaning the filters 11

External cleaning 11

Prolonged periods of non-operation 11

Frost precautions 11

Moving the machine 11

Something not working 12

Service and spare parts 12

Hints for test centres 13

Installation instructions 14

Water supply connections 14

Water outlet hose connection 14

Electrical connection 15

Protection against flooding 15

Contents

Dimensions Width 59.6 cm

Height with worktop 81.8 - 87.8 cm

Max depth 57.5 cm

Max depth with open door 111.4 cm

Electrical connection Voltage 230 V - 50 Hz

Motor rating during wash 200 W

Power of heating element 2100 W

Overall power 2300 W

Water supply pressure Minimum 50 kPa (0.5 bar)

Maximum 800 kPa (8 bar)

Capacity 12 place settings

Technical specifications

This appliance complies with the following E.E.C. Directives:

- 73/23 of 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

It is most important that this instruction book should be retained with the appliance for future reference. Should the

appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that

the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the

relevant safety information.

This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the

appliance.

Installation

● This appliance is heavy. Care should be taken when moving it.

● It is dangerous to alter the specifications or attempt to modify

this product in any way.

● Care must be taken to ensure that the appliance does not

stand on the electrical supply cable.

● Any electrical work required to install this appliance should

be carried out by a qualified electrician or competent person.

● Any plumbing work required to install this appliance should

be carried out by a qualified plumber or competent person.

Child Safety

● This appliance is designed to be operated by adults.

Children should not be allowed to tamper with the controls or

play with the product.

● Keep all packaging well away from children.

● Keep all detergents in a safe place out of children's reach.

During Use

● Items that are contaminated by petrol, paint, steel or iron

debris, corrosive, acidic or alkaline chemicals must not be

washed in this dishwasher.

● Under no circumstances should you open the door whilst the

appliance is in operation. Always turn off the appliance

before opening the door.

● Only use detergent specifically designed for use in

dishwashers.

● Long bladed knives stored in an upright position are a

potential hazard.

● Long and/or sharp items of cutlery such as carving knives

must be positioned horizontally in the upper basket.

● When finishing loading or unloading close the door, as an

open door can be a hazard.

● Do not sit or stand on the open door.

● Isolate the appliance from the power supply and turn off the

water supply after use.

● Care should be taken when cleaning the bottom door seal

and hinge area as any exposed metal edges may cut if care

is not taken.

● This product should be serviced by an authorised Service

engineer, and only genuine spare parts should be used.

● Under no circumstances should you attempt to repair the

machine yourself. Repairs carried out by inexperienced

persons may cause injury or serious malfunctioning.

Contact your local Service Force Centre. Always insist on

genuine spare parts.

Conservation

In the interest of the environment:

● Materials marked with the symbol are recyclable.

● Check with your local Council or Environmental Health Office

to see if there are facilities in your area for re-cycling this

appliance.

● When the appliance is to be scrapped, cut off the power

supply cable and make the door closing device unusable to

prevent young children from being trapped inside.

● Help to keep your country tidy - use authorised disposal sites

for your old appliance.

Important safety information

1. On/Off indicator light

2. On/Off push button

3. "BIO 50°" push button

4. Programme guide

5. Door handle

6. Salt refill indicator light

7. Programme marker

8. Programme selector dial

9. Programme sequence indicator

As the programme progresses, the programme selector

dial turns, to show the phase in the wash programme the

appliance has reached.

Prewash / Rinse and Hold

Main wash

Cold rinse

Hot rinse

Drying

The control panel

Description of the appliance

IN80

1. Water hardness adjustment

2. Levelling spacers

3. Upper basket stop

4. Salt container

5. Lower spray arm

6. Detergent dispenser

7. Control panel

8. Rating plate

9. Rinse aid dispenser

10. Large filter

11. Central filter

12. Upper spray arm

13. Upper basket

Before using your dishwasher for the

first time:

1. Ensure that the electrical and water connections comply

with the installation instructions

2. Remove all packaging from inside the appliance

3. Set the water softener

4. Pour 1 litre of water inside the salt container and then fill

with salt

5. Fill the rinse aid dispenser

6. Run a Rinse and Hold programme.

Setting the water softener

The dishwasher is equipped with a water softener designed to

remove minerals and salts from the water supply, which would

have a detrimental or adverse effect on the operation of the

appliance.

The higher the content of these salts, the harder your water is.

Water hardness is measured in equivalent scales, German

degrees, French degrees and PPM (parts per Million).

The softener should be adjusted according to the hardness of

the water in your area. Your local Water Authority can advise

you on the hardness of the water in your area.

The dishwasher is factory set at level 2.

If this level is not suitable for your area the softener should be

adjusted.

If your water is level 0 it is already soft and therefore there

is no need to use salt.

Adjust the water softener on level 1 without using salt.

In this case the salt indicator light on the control panel will

always remain illuminated when the machine is switched

on.

To adjust the water softener

With a screwdriver turn the selector on the upper front corner

of the machine until the level required corresponds with the

marker.

Filling with salt

Only use salt specifically designed for use in

dishwashers.

All other types of salt not specifically designed for use in

a dishwasher, especially table salt, will damage the water

softener.

Only fill with salt just before starting one of the washing

programmes.

This will prevent any grains of salt or salty water, which

may have been spilled, remaining on the bottom of the

machine for any period of time, which may cause

corrosion.

To fill:

1. To fill with salt, unscrew the cap of the salt container.

2. Pour 1 litre of water inside the container (this is necessary

only before filling with salt for the first time).

3. Using the funnel provided,

pour in the salt until the

container is full.

Do not worry if water over

flows from the unit when

filling with salt, this is quite

normal.

4. Replace the cap making

sure that there is no trace

of salt on the screw thread

or on the gasket.

5. Screw on the cap tightly.

The salt container will require topping up periodically.

You are reminded of this by the salt indicator light on the

control panel which comes on when the salt has finished.

The salt indicator light on the control panel can remain

illuminated for 2-6 hours after the salt has been

replenished, assuming the dishwasher remains switched

on.

If you are using salts that take longer to dissolve then this

can take longer. The function of the machine is not

affected.

Before use

Level

Use of

salt

French

degrees

(°TH)

PPM

(Parts per

Million)

German

degrees

(dH°)

YES

0 - 4

5 - 11

12 - 22

23 - 34

35 - 45

46 - 50

0 - 8

9 - 20

21 - 40

41 - 60

61 - 80

81 - 90

0 - 80

81 - 200

201 - 400

401 - 600

601 - 800

801 - 900

Water hardness

AA05

SALE

SALT

SALZ

SEL

SR06

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring

thorough rinsing, and spot and streak free drying. The

dispenser, which is positioned inside the door, holds about 110

ml of rinse aid, which is sufficient for 16 - 40 dishwashing

programmes, depending upon the dosage setting.

Filling with rinse aid

1. Open the container by turning the lid (A) anticlockwise.

2. Add the rinse aid until the container is completely full.

The indicator (B) will be completely dark.

3. Top up the rinse aid when the indicator (B) becomes clear.

Ensure that the lid is closed after every refill.

Do not put liquid detergent in the rinse aid compartment. Clean

up any rinse aid spilt during filling with an absorbent cloth to

avoid excess foaming during the next wash.

Adjusting the dose

According to the finish and drying results obtained, adjust the

dose of rinse aid by means of the 6 position selector (C)

(position 1 minimum dosage, position 6 maximum dosage).

Increase the dose if there are drops of water or lime spots on

the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes.

Use of detergent

Only use detergents specifically designed for use in

dishwashers.

If using powder detergents proceed as follows:

1. Open the dispenser lid by pulling the catch (D).

2. Add the detergent according to the instructions given in the

"Washing programmes" chart.

As all detergents are not the same, you should also consult

the instructions on the packet.

3. Always close the lid.

4. If the programme has a prewash add the required detergent

over the lid of the dispenser, according to the instructions

given in the "Washing programmes" chart.

If using detergent in tablets proceed as follows:

1. For all programmes; place 1 tablet inside the detergent

dispenser.

2. Always close the lid.

3. For all programmes with prewash; place a portion of a

further tablet on the lid of the detergent dispenser.

If detergents in tablet form are used with the QUICK 50°

programme, it is advisable to put the tablet directly in the

dishwasher and not in the dispenser or in special tablet

containers. This ONLY applies to this programme.

Insufficient quantities of detergent will produce poor

washing results, whereas an excessive amount of

detergent will not improve washing results and is also

wasteful.

Using no more than the correct amount also contributes

to reducing pollution.

Compact detergents with enzymes

In these compact powders the environmentally unfriendly

components have been replaced by natural enzymes and

other more biodegradable substances.

The enzymes deploy their full dirt dissolving power at a

temperature as low as 50°C.

By choosing the Bio programmes you can therefore achieve

the same cleaning results that would otherwise be achievable

only with 65°C programmes and conventional detergents.

BR01

BR03

BR02

DE17

DE02

Loading your appliance

Before placing dishes in the machine, remove any scraps of

food, to avoid clogging the filters and consequently reducing

the performance.

Do not load very small items which can fall through the

baskets.

Open the door and slide out the baskets to load the dishes.

The lower basket

The lower basket is designed to take saucepans, lids, plates,

salad bowls, cutlery etc.

Serving dishes and large lids should be arranged around the

edge of the basket, ensuring that the upper spray arm can turn

freely.

The two rear rows of prongs on the lower basket can be easily

lowered to allow you to load pots, pans and bowls.

To lower the prongs:

Slightly pull them upwards and let them drop down (see

picture).

To bring them back to the standing position, just pull them up

again.

The cutlery basket

Long bladed knives stored in an upright position are a

potential hazard.

Long and/or sharp items of cutlery such as carving knives

must be positioned horizontally in the upper basket.

Take care when loading or unloading sharp items such as

knives.

Cutlery should be placed in the removable cutlery basket with

the handles facing downwards. If the handles protrude from

the bottom of the basket, obstructing the lower spray arm, load

the cutlery with the handles facing upwards.

Mix spoons with other cutlery

to prevent them from sticking

together.

For best results we

recommend you to use the

cutlery grid provided (if the

size and dimensions of the

cutlery allow it).

The cutlery basket can be

placed either to the left or to

the right of the lower basket.

The upper basket

The upper basket is designed for plates (dessert plates,

saucers, dinner plates of up to 25 cm in diameter), salad

bowls, cups and glasses.

Arrange items on and

underneath the cup racks so

that water can reach all

surfaces.

Glasses with long stems can

be placed upside down in the

cup racks.

Light items (plastic bowls

etc.) must be loaded in the

upper basket and arranged

so they do not move.

In case that plates are loaded in the upper

basket:

load them starting from the

rear positions of the

basket; tilting them slightly

forwards and avoiding the

front positions near the

door.

Before closing the door, ensure that the spray arms can

rotate freely.

Adjusting the height of the upper basket

If washing very large plates (over 27 cm and up to 32 cm in

diameter) you can load them in the lower basket after moving

the upper basket to the higher position.

To move to the higher position proceed as

follows:

1. Move the front runner stops (A) of the upper basket

outwards and slide the basket out.

2. Refit the basket in the higher position and replace the stops

(A) in their original position.

When the top basket is in the higher position it will only take

plates up to 20 cm in diameter and you will not be able to use

the cup racks.

After loading your machine always close the door, as an

open door can be a hazard.

Using your appliance

UI50

UI47

UI43

UI44

UI42

US64

US71

RC01

To save energy

Place dishes in the machine immediately after every meal and

wait until the dishwasher is full before washing.

Do not prewash dishes under running water.

Select the Quick 50°C programme when dishes are not very

soiled, following the instructions given in the "Washing

programmes" chart.

For best washing results

Before loading, remove all scraps of food and soak very

heavily soiled pots and pans.

Arrange saucepans, cups and glasses etc. upside-down.

Tilt items with convex or concave surfaces so that the water

drains off easily.

Avoid contact between the dishes as far as possible.

Items not suitable for dishwashers

The following items should not be washed in the dishwasher

(unless they are sold as dishwasher proof):

- Cutlery with wooden or horn handles or glued parts

- bronze cutlery

- saucepans with wooden handles

- aluminium ware

- crystal ware

- leaded glass

- plastic items

- antique or fine decorated china

Certain types of decoration can discolour when washed in a

dishwasher.

Crystal-ware and plastic objects, if not guaranteed dishwasher

proof should be washed by hand.

Certain types of glass can also become opaque after being

washed several times in a dishwasher.

A chemical reaction can occur between silver cutlery and

stainless steel cutlery. As a precaution, do not wash together.

Iron and cast iron objects can rust and stain other items.

Aluminium tends to go black, copper, pewter and brass tend to

stain.

If in doubt check with manufacturer of the item.

When buying new dishes, ensure that they are dishwasher

proof.

Hints and tips

Washing programmes

Testing programme for EN 50242 (see "Hints for Test Centres).

This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that you

may re-use them promptly.

Programme Degree of soil Starting position

of the programme

selector

Normal soil.

Crockery and cutlery

Normal soil.

Crockery and cutlery

Light soil.

Crockery, cutlery and

party crockery

Any.

Partial load (to be

completed later in the

day).

Required

push buttons

Cycle

description

Recommended

quantity of detergent

wash prewash

Normal 65°C

Bio 50°C

Rinse and Hold

Quick 50°C

25 g 5 g

30 g /

Cold prewash

Main wash up to 65°C

1 cold rinse

1 hot rinse

Active drying

1 cold rinse (to avoid

food scraps from

sticking together

Cold prewash

Main wash up to 50°C

1 cold rinse

1 hot rinse

Active drying

Main wash up to 50°C

1 cold rinse

1 hot rinse

On/Off

BIO 50°

On/Off

BIO 50°

On/Off

1. Check the filters

Ensure they are clean and properly positioned (see

"Maintenance and cleaning").

2. Check that there is rinse aid and salt

3. Load the dishes

Remove any scraps of food.

Pull the lower basket out and arrange the saucepans,

plates and cutlery in it.

Pull the upper basket out and arrange the plates,

saucers, glasses and cups etc. in it.

Slide the baskets back into the machine.

4. Ensure that the spray arms can

rotate freely.

5. Measure out detergent

Add the required amount of detergent into the dispenser

according to the dosage quantity given in the "Washing

programmes" chart.

Close the detergent dispenser lid.

6. Close the dishwasher door

7. Set the programme

Turn the programme selector dial clockwise until the

letter of the programme you wish to select corresponds

with the programme marker on the control panel.

If necessary select the temperature of the main wash

according to the instructions in the "Washing

programmes" chart (see "Required push buttons").

8. Start the programme

Depress the On/Off push button.

The On/Off indicator light will come on and the machine

will start.

If you wish to interrupt the washing programme at any

time press this button again.

9. At the end of the washing

programme

At the end of the programme the dishwasher will

automatically stop.

The On/Off indicator light remains on until the On/Off

push button is depressed.

10. Switch off the dishwasher

Switch off the dishwasher by pressing the On/Off push

button and open the door.

Wait a few minutes before removing the dishes; in this

way they will be cooler and the drying will be improved.

Empty the lower basket first and then the upper one; this

will avoid water dripping from the upper basket onto the

dishes in the lower one.

When the washing programme has finished, it is

recommended that the dishwasher is unplugged and the

water tap turned off.

In general it is not advisable to open the door while the

machine is working; if the door is opened however, a

safety device ensures that the machine stops.

Important!

Care must be taken if the door is opened during the hot

phase or immediately after a programme has finished, as

steam may escape.

Operating sequence

Internal cleaning

Ensure that the seals around the door, the detergent and rinse

aid dispensers are cleaned regularly with a damp cloth.

We recommend every 3 months to run a 65°C wash without

dishes using detergent.

Cleaning the central filter

(After each wash)

Scraps of food may accumulate in the drain filter (A) and

should be removed by rinsing the filter under running water.

To remove the drain filter

- simply pull it out by the handle.

Once cleaned, refit the filter by pushing it back to its original

position until it engages.

Cleaning the large filter

(Every week)

If necessary clean the large filter (B) on both sides under

running water, using a brush.

To remove the large filter

1. Remove the spray arm by pulling it upwards on one side.

2. Turn the column (C) anticlockwise by 90° and then slide out

the filter.

3. Once cleaned refit it following the above instructions in

reverse order.

4. Ensure the filter is in its original position, the handle of the

drain filter should be pointing towards the front of the

appliance.

The dishwasher must not be used without filters.

Incorrect repositioning and fitting of the filters will

produce poor washing results.

Cleaning the filters is vital to ensure correct operation of

the machine.

External cleaning

Clean the external surfaces of the machine and control panel

with a damp soft cloth. If necessary use only neutral

detergents. Never use abrasive products, scouring pads or

solvent (acetone, trichloroethylene etc....).

Prolonged periods of non-operation

If you are not using the machine for any period of time you are

advised to:

1. Unplug the appliance and then turn off the water.

2. Fill the rinse aid dispenser.

3. Leave the door ajar to prevent the formation of any

unpleasant smells.

4. Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature

is below 0°C. If this is unavoidable, empty the machine, close

the appliance door, disconnect the water inlet pipe and empty

it.

Moving the machine

If you have to move the machine (moving house etc....):

1. Unplug it.

2. Turn the water tap off.

3. Remove the water inlet and discharge hoses.

4. Pull the machine out together with the hoses.

Avoid over tilting the machine during transportation.

Maintenance and cleaning

MA04

MA19

90°

MA05

MA20

MA21

MA18

Symptom Solution

The machine will not start ● The door has not been properly closed.

● The plug is not properly inserted in the power socket.

● There is a power failure.

The machine does not fill with water

● Ensure the water tap is open.

● Ensure the mains water supply has not been cut off.

● The inlet hose may be squashed or bent. Reposition the hose.

● The inlet hose may be blocked. Switch off the water supply and clean

the filter.

The dishwasher will not drain

● The drain hose may be squashed or bent. Reposition the hose.

● The sink may be blocked. Clear any blockages.

● The drain hose extension is not correct. Follow the instructions for

connecting to the waste.

● There is no vent in the end of the drain hose.

The machine is noisy

● Dishes are rattling against each other, refer to "Loading your machine".

● The spray arms are knocking against the dishes. Refer to "Loading

your machine".

The door is difficult to close

● The dishwasher is not level, or not properly built-in.

The filters are blocked

● Clean the filters (refer to "Maintenance and cleaning").

The spray arms are not rotating

● Ensure that the baskets have been loaded correctly. Refer to "Loading

your machine".

Visible lime deposits or white film on the dishes

● Check that there is salt and that the salt cap is tight.

● Check that the right level of the water softener is set.

The dishes are not quite dry

● The rinse aid has run out or too little is being used.

The dishes are not clean

● The baskets are too full.

(poor wash)

● The dishes have not been arranged properly.

● The spray arms do not rotate

● The spray arms are clogged.

● The filters are clogged.

● The filters are not in the correct position.

● Not enough detergent has been used or it is unsuitable.

● The detergent is old or has gone hard.

● The salt container cap is not properly closed.

● The washing programme selected is too gentle.

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer.

Before contacting your local Service Force Centre, please carry out the following suggested corrective actions listed below.

Something not working

If after all these checks, the problem persists, contact your

local Service Force Centre, quoting the model and serial

number.

This information can be found on the rating plate located on

the right hand side of the dishwasher door (see picture).

Service and spare parts

This product should be serviced by an authorised Service

engineer, and only genuine spare parts should be used.

Under no circumstances should you attempt to repair the

machine yourself.

Repairs carried out by inexperienced persons may cause

injury or serious malfunctioning. Contact your local

Service Force Centre.

Always insist on genuine spare parts.

Prod.No.

........

Ser. No.

.........

Mod.

........

RA01

Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.

Hints for test centres

Test standard EN 50242

Reference programme: Bio 50°C

Load: 12 standard place settings

Rinse aid selector: position 5

Detergent dosage : 25 g in the dispenser

5 g on the dispenser lid

Arrangement upper basket

Arrangement lower basket

Arrangement cutlery basket

Any electrical work required to install this appliance

should be carried out by a qualified electrician or

competent person.

Any plumbing work required to install this appliance

should be carried out by a qualified plumber or competent

person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a

drain.

Attention!

Carefully follow the instructions on the enclosed template for

building in the dishwasher and fitting the furniture panel.

Water supply connections

This dishwasher may be fed with either hot (max. 60°) or cold

water. Nevertheless we advise you a cold water supply.

A hot water supply is not always efficient with very soiled

crockery as it shortens the washing programmes a lot.

The water pressure must be within the limits given in the

technical specifications.

Your local Water Authority will advise you on the average

mains pressure in your area.

The dishwasher features fill and drain hoses which can be

turned either to the left or the right to suit the installation. The

locknut must be correctly fitted to avoid water leaks.

Avoid bends or kinks in the hose which could prevent or slow

down the water supply.

If the machine is connected to new pipes or pipes which have

not been used for a long time, you should run the water for a

few minutes before connecting the inlet hose. This will prevent

deposits of sand or rust clogging the inlet hose filter.

For making the connection itself, the coupling nut fitted to the

machine’s supply hose is designed to screw onto either a 3/4

inch gas thread spout, or to a purpose made quick-coupling

tap such as the Press-block.

Do not use, for connection, old hoses which have been

used in another appliance.

Be sure to incorporate the

filter (A), supplied with the

machine, onto the joint.

Water outlet hose connection

The end of the drain hose can be connected in the following

ways:

1. To the sink outlet spigot, securing it if necessary with a clip.

2. To a stand pipe provided with vent-hole, minimum internal

diameter 4 cm.

The waste connection must be at a height of between 30 cm

(minimum) and 100 cm (maximum) from the bottom of the

dishwasher.

The drain hose can face either to the right or left of the

dishwasher

Ensure the hose is not bent or squashed as this could prevent

or slow down the discharge of water.

If you use a drain hose extension it must be no longer than 2

metres and its internal diameter must be no smaller than the

diameter of the hose provided.

Likewise the internal diameter of the couplings used for

connections to the waste outlet must be no smaller than the

diameter of the hose provided.

The sink plug must not be in place when the machine is

draining as this could cause the water to siphon back into the

machine.

Attention!

Our appliances are supplied with a security device to protect

against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated

this can prevent the correct draining of your dishwasher.

We advise you therefore to remove it.

Installation instructions

CA03

CS13

min 30 cm

max 100 cm

min 4 cm

Ø 21

Ø 18

1 2

CS14

min 30 cm

max 100 cm

+ 2 m max

Ø 18

Ø 21

Electrical connection

Before plugging the appliance into the wall socket, make sure

that:

1. The mains voltage corresponds to the voltage given in the

"Technical specifications".

2. The meter, fuses, mains power supply and wall socket can

all take the maximum load required.

Make sure that the socket and plug are compatible without

having to use any type of adaptor. If necessary, have the

domestic wiring system socket replaced.

Safety standards require the appliance to be earthed.

The manufacture accepts no liability for failure to observe

the above safety precautions.

Protection against flooding

In order to prevent water floods, the machine has been

provided with a device in the bottom of the machine.

The device comes into operation as a result of any water leaks

in the machine.

To repair the machine call the Service Force Centre.

The Electrolux Group. The world’s No.1 choice.

The Electrolux Group is the world’s largest producer of powered appliances for kitchen,

cleaning and outdoor use. More than 55 million Electrolux Group products (such as

refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year

to a value of approx. 14 billion USD in more than 150 countries around the world.

152973 93/0

0 07/02

Subject to change without notice

Electrolux ESI6100K User manual

Brand: Electrolux

Model: ESI6100K

Category: Dishwashers

Type: User manual

Download PDF

report

Electrolux ESI6100K User manual

Electrolux ESI6100K User manual

Related papers

Other documents