Aeg-Electrolux BS9304001M User manual

Type
User manual

The Aeg-Electrolux BS9304001M is an EN Oven that offers a variety of features to make cooking easier and more efficient. With its core temperature sensor, you can accurately measure the internal temperature of your food to ensure it is cooked to perfection. The oven also includes a variety of automatic programs that take the guesswork out of cooking, and its steam cooking function allows you to prepare healthy and flavorful dishes. Additionally, the oven's self-cleaning function helps to keep it clean and hygienic.

The Aeg-Electrolux BS9304001M is an EN Oven that offers a variety of features to make cooking easier and more efficient. With its core temperature sensor, you can accurately measure the internal temperature of your food to ensure it is cooked to perfection. The oven also includes a variety of automatic programs that take the guesswork out of cooking, and its steam cooking function allows you to prepare healthy and flavorful dishes. Additionally, the oven's self-cleaning function helps to keep it clean and hygienic.

BS9304001
EN
OVEN USER MANUAL
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect,
from specialist cookware to cutlery baskets, from bottle holders to delicate
laundry bags…
Visit the webshop at:
www.aeg.com/shop
2
CONTENTS
4 Safety information
5 Safety instructions
8 Product description
10 Before first use
11 Control panel
12 Daily use
16 Clock functions
18 Automatic programmes
19 Using the accessories
21 Additional functions
23 Care and cleaning
26 What to do if…
27 Installation
31 Environment concerns
31 Warranty
The following symbols are used in this user
manual:
Important information concerning your
personal safety and information on how to
avoid damaging the appliance.
General information and tips
Environmental information
Subject to change without notice.
Contents
3
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an incor-
rect installation and use causes injuries and damages. Always keep the
instructions with the appliance for future reference.
Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they are supervised by an adult
or a person who is responsible for their safety.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when it operates
or when it cools down. Accessible parts are hot.
If the appliance has a child safety device, we recommend that you
activate it.
Cleaning and user maintenance shall not be made by children with-
out supervision.
General Safety
Internally the appliance becomes hot when in operation. Do not
touch the heating elements that are in the appliance. Always use
oven gloves to remove or put in accessories or ovenware.
Do not use a steam cleaner to clean the appliance.
Before maintenance cut the power supply.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean
the glass door since they can scratch the surface, which may result
in shattering of the glass.
Only use the core temperature sensor recommended for this appli-
ance.
4 Safety information
To remove the shelf supports first pull the front of the shelf support
and then the rear end away from the side walls. Install the shelf
supports in the opposite sequence.
SAFETY INSTRUCTIONS
Installation
WARNING!
Only a qualified person must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied with the appliance.
Always be careful when you move the appliance because it is heavy. Always wear safety
gloves.
Do not pull the appliance by the handle.
Keep the minimum distance from the other appliances and units.
Make sure that the appliance is installed below and adjacent safe structures.
The sides of the appliance must stay adjacent to appliances or to units with the same
height.
Electrical connection
WARNING!
Risk of fire and electrical shock.
All electrical connections should be made by a qualified electrician.
The appliance must be earthed.
Make sure that the electrical information on the rating plate agrees with the power sup-
ply. If not, contact an electrician.
Always use a correctly installed shockproof socket.
Do not use multi-plug adapters and extension cables.
Make sure not to cause damage to the mains plug and to the mains cable. Contact the
Service or an electrician to change a damaged mains cable.
Do not let mains cables to come in touch with the appliance door, specially when the
door is hot.
The shock protection of live and insulated parts must be fastened in such a way that it
cannot be removed without tools.
Connect the mains plug to the mains socket only at the end of the installation. Make
sure that there is access to the mains plug after the installation.
If the mains socket is loose, do not connect the mains plug.
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
Safety instructions
5
Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses re-
moved from the holder), earth leakage trips and contactors.
The electrical installation must have an isolation device which lets you disconnect the
appliance from the mains at all poles. The isolation device must have a contact opening
width of minimum 3 mm.
Use
WARNING!
Risk of injury, burns or electric shock or explosion.
Use this appliance in a household environment.
Do not change the specification of this appliance.
Make sure that the ventilation openings are not blocked.
Do not let the appliance stay unattended during operation.
Deactivate the appliance after each use.
Internally the appliance becomes hot when in operation. Do not touch the heating ele-
ments that are in the appliance. Always use oven gloves to remove or put in accessories
or ovenware.
Be careful, when you open the appliance door while the appliance is in operation. Hot air
can release.
Do not operate the appliance with wet hands or when it has contact with water.
Do not apply pressure on the open door.
Do not use the appliance as a work surface or as a storage surface.
Always keep the appliance door closed when the appliance is in operation.
Open the appliance door carefully. The use of ingredients with alcohol can cause a mix-
ture of alcohol and air.
Do not let sparks or open flames to come in contact with the appliance when you open
the door.
Do not put flammable products or items that are wet with flammable products in, near
or on the appliance.
WARNING!
Risk of damage to the appliance.
To prevent damage or discoloration to the enamel:
– Do not put ovenware or other objects in the appliance directly on the bottom.
– Do not put aluminium foil directly on the bottom of the appliance.
– do not put water directly into the hot appliance.
– do not keep moist dishes and food in the appliance after you finish the cooking.
– be careful when you remove or install the accessories.
Discoloration of the enamel has no effect on the performance of the appliance. It is not
a defect in the sense of the warranty law.
Use a deep pan for moist cakes. Fruit juices cause stains that can be permanent.
6 Safety instructions
Steam Cooking
WARNING!
Risk of burns and damage to the appliance.
Do not open the appliance door during steam cooking. Steam can release.
Care and Cleaning
WARNING!
Risk of injury, fire or damage to the appliance.
Before maintenance, deactivate the appliance and disconnect the mains plug from the
mains socket.
Make sure the appliance is cold. There is the risk that the glass panels can break.
Replace immediately the door glass panels when they are damaged. Contact the Service.
Be careful when you remove the door from the appliance. The door is heavy!
Clean regularly the appliance to prevent the deterioration of the surface material.
Remaining fat or food in the appliance can cause fire.
Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads, solvents or metal objects.
If you use an oven spray, obey the safety instructions on the packaging.
Do not clean the catalytic enamel (if applicable) with any kind of detergent.
Internal light
The type of light bulb or halogen lamp used for this appliance, is only for household ap-
pliances. Do not use it for house lighting.
WARNING!
Risk of electrical shock.
Before replacing the lamp, disconnect the appliance from the power supply.
Only use lamps with the same specifications.
Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the mains supply.
Cut off the mains cable and discard it.
Remove the door catch to prevent children and pets to get closed in the appliance.
Safety instructions
7
PRODUCT DESCRIPTION
1
10
4
3
5
6
8
9
5
4
3
2
1
7
2
1
Control panel
2
Water drawer
3
Socket for the core temperature sensor
4
Heating element
5
Oven lamp
6
Fan
7
Rear wall heating element
8
Steam generator with cover
9
Shelf support, removable
10
Shelf positions
8 Product description
Accessories
Wire shelf
For cookware, cake tins, roasts.
Baking tray
For cakes and biscuits.
Grill / roasting pan
To bake and roast or as pan to collect fat.
Patisserie tray
For rolls, brezels and small pastries.
Suitable for steam functions. Discoloration
of the surface has no effect on function.
Sponge
For absorbing residual water from the steam
generator.
Product description 9
Steam set
One unperforated and one perforated food
container.
The steam set drains the condensing water
away from the food during steam cooking.
Use it to prepare food that should not be in
the water during the cooking (e.g. vegeta-
bles, pieces of fish, chicken breast). The set is
not suitable for food that needs to soak in
the water (e.g. rice, polenta, pasta).
Core Temperature Sensor
To measure how far the food is cooked.
BEFORE FIRST USE
WARNING!
Refer to "Safety information" chapter.
Initial Cleaning
Remove all parts from the appliance.
Clean the appliance before first use.
CAUTION!
Do not use abrasive cleaning agents! This can damage the surface. Refer to chapter "Care
and Cleaning".
First Connection
When you connect the appliance to the mains or after the power cut, you have to set the
language, display contrast, display brightness and time of the day. Use the shuttle to set the
value. Press OK to confirm.
10 Before first use
CONTROL PANEL
Electronic programmer
1 2 3 4 5 6 7 8 9
Use the sensor fields to operate the appliance
Number
Sensor
field
Function Comment
1
-
Display Shows the current settings of the
appliance.
2
On / off To activate and deactivate the ap-
pliance.
3
OK and Shuttle To confirm the selection or setting.
Rotate the shuttle to navigate.
4
Home Key To show the main menu.
5
Time and additional functions To set different functions. When a
heating function operates, touch
the sensor field to set the timer,
Child Safety, Favourite Programme
memory, Heat + Hold , Set + Go , or
to change the settings of the Core
Temperature Sensor.
6
Heating Functions or Assisted
Cooking
To choose a heating function, touch
the sensor field once. To choose the
Assisted Cooking function, touch it
twice. To activate or deactivate the
light, touch the field for 3 seconds.
7
Temperature selection To set the temperature or show the
current temperature in the appli-
ance. To activate or deactivate the
Fast Heat Up function, touch the
field for 3 seconds.
8
Minute Minder To set the Minute Minder.
9
Favourite Programme To view your favourite programmes.
Control panel 11
Display
123
45
1
Heating function
2
Shows the current time
3
Heat-up indicator
4
Temperature
5
Shows duration time or end time of a
function
Other indicators of display
Symbol Function
Minute Minder The function is active.
Time Shows the current time.
Duration Shows the time required for the cooking cycle.
End Time Shows when the cooking cycle ends.
Time Indication Shows how long the heating function operates.
Heat-up indicator Indicates the temperature level in the cavity. The display
shows it also when you deactivate the appliance and the
cavity is still warm.
Fast Heat Up indicator The function is active. It decreases the heat up time.
Weight Automatic The display shows that the automatic weight system is ac-
tive or that weight can be changed.
Heat + Hold The function is active.
DAILY USE
WARNING!
Refer to "Safety information" chapter.
The menus in overview
Main menu
Symbol Menu item Application
Heating Functions Contains a list of heating functions.
Assisted Cooking Contains a list of automatic cooking programmes.
Steam Cleaning Procedure for cleaning with steam.
Basic Settings Contains a list of other settings.
Favourite Programme
Contains a list of favourite cooking programmes stor-
ed by user.
12 Daily use
Submenus for: Basic Settings
Symbol Submenu Description
Set Time of Day Sets the current time on the clock.
Time Indication
When ON, the display shows the current time when
you deactivate the appliance.
SET + GO
When ON, you can activate the functions when you
activate the heating function.
Heat + Hold
When ON, you can activate this function when you
activate the heating function.
Extra time Activates and deactivates the function.
Display Contrast Adjusts display contrast by degrees.
Display Brightness Adjusts display brightness by degrees.
Set Language Sets the language for the display.
Buzzer Volume Adjusts volume of press-tones and signals by degrees.
Key Tones
Activates and deactivates the tone of the touch
fields.
Alarm/Error Tones Activates and deactivates the alarm tones.
Cleaning Assistant Guides you through the cleaning procedure.
Service Shows the software version and configuration.
Factory Settings Resets all settings to factory settings.
Heating functions
Submenu for: Heating Functions
heating function Application
Full Steam For vegetables, fish, potatoes, rice, pasta or special
side-dishes.
Half Steam + Heat For dishes with a high moisture content and for
poaching fish, custard royale and terrines.
Quarter Steam + Heat To bake bread, roast large pieces of meat or to warm
up chilled and frozen meals.
Eco Steam The ECO functions let you optimize the energy con-
sumption during cooking. It is necessary to set the
cooking time first. To get more information about the
recommended settings, refer to the cooking tables
with the equivalent usual heating function.
Daily use 13
heating function Application
Moist Fan Baking For energy-saving baking and cooking of mainly dry
bakery items as well as for baking in tins on one shelf
position.
True Fan Cooking For baking on up to three levels at the same time. Set
the temperature 20 - 40 °C lower than when using
Conventional Cooking .
Pizza Setting For baking on one level dishes that require more in-
tensive browning and a crispy base. Set the tempera-
ture 20 - 40 °C lower than when using Conventional
Cooking.
Slow Cook For preparing especially tender, succulent roasts.
Conventional Cooking For baking and roasting on one level
Frozen Foods To make your convenience food like e.g. French Fries,
Wedges, spring rolls crispy.
Turbo Grilling To roast larger meat joints or poultry with bones on
one shelf position. Also to gratinate and to brown.
Fast Grilling To grill flat food in large quantities. To toast bread.
Grilling To grill flat food in the middle of the grill. To toast
bread.
Keep Warm To keep food warm.
Defrost To defrost frozen food.
Bottom Heat For baking cakes with crispy or crusty bases and to
preserve food.
Dough Proving For controlled rising of yeast dough before baking.
Bread Baking To bake bread.
Au Gratin For dishes like lasagna or potato gratin. Also to grati-
nate and brown.
Preserving To preserve vegetables e.g. mixed prickels in glasses
and liquid.
Drying For drying of sliced fruits like apples, plums, peaches
and vegetables as tomatoes, zucchini or mushrooms.
14 Daily use
heating function Application
Plate Warming To preheat your plate for serving.
Steam Reheating To reheat your already cooked food directly on a
plate.
Eco Roasting The ECO functions let you optimize the energy con-
sumption during cooking. It is necessary to set the
cooking time first. To get more information about the
recommended settings, refer to the cooking tables
with the equivalent usual heating function.
Navigating the menus
Operation of the menus:
1. Activate the appliance.
2. Rotate the shuttle clockwise or counterclockwise to select the menu option.
3. Press OK to move to submenu or accept the setting.
At any time you can get back to the main menu with
.
Activating a heating function
1. Activate the appliance.
2. Select the Heating Functions menu. Press OK to confirm.
3. Set the heating function. Press OK to confirm.
4. Set the temperature. Press OK to confirm.
Press to go directly to the Heating Functions menu. You can also use it when the appli-
ance is deactivated.
Steam cooking
The water drawer cover is in the control panel.
1. Fill the water drawer with 800 ml of water.
The water supply is sufficient for approximately 50 minutes.
CAUTION!
Do not put water directly in the steam generator!
Use only water as the liquid. Do not use filtered (demineralised) or distilled water.
2. Activate the appliance.
3. Set the steam heating function and temperature.
4. If necessary, set the function Duration
or End Time .
The first steam shows after approximately 2 minutes. When the appliance reaches set
temperature an acoustic signal sounds.
The signal sounds again at the end of the cooking time or when water finishes.
5. Deactivate the appliance.
Daily use
15
When the water drawer has been emptied, an acoustic signal sounds.
When the appliance has cooled down, soak up all remaining water from the steam genera-
tor with the Sponge. If necessary, clean the steam generator with some vinegar.
Let the appliance dry fully with the door open.
Heat-up indicator
When you activate an heating function, the bar on the display comes on. The bar shows
that the temperature increases.
Fast Heat Up indicator
This function decreases the heat-up time. To activate the function hold for 3 seconds.
You will see the heat-up indicator alternates.
Residual heat indicator
When you deactivate the appliance, the display shows the residual heat. You can use the
heat to keep the food warm.
Energy saving
The appliance contains features which help you save energy during everyday cooking:
Residual heat:
When the heating function or programme operates, the heating elements are deacti-
vated 10% earlier (the lamp and fan continue to operate). For this feature to operate,
the cooking time must be longer than 30 minutes or you must use the clock functions
( Duration , End Time ).
When the appliance is off, you can use the heat to keep food warm. The display shows
the remaining temperature.
Deactivate the lamp - touch and hold
for 3 seconds to deactivate the lamp during
cooking.
Eco functions - refer to " Heating Functions ".
CLOCK FUNCTIONS
Timer functions
Symbol Function Description
Minute Minder
To set a countdown (max 2 hours 30 minutes). This function has
no effect on the operation of the appliance. You can also acti-
vate it in off state. Use
to activate the function. Use the
shuttle to set the minutes and OK to start.
Duration
To set how long the appliance has to be in operation (max. 23 h
59 min).
End Time
To set the switch-off time for an heating function (max. 23 h
59 min).
16 Clock functions
You can use Duration and End Time at the same time, if you want to automatically activate
and deactivate the appliance on a given time later.
If you set the time for a clock function, the time starts to count down after 5 seconds.
If you use the clock functions Duration and End Time, the appliance deactivates the heating
elements after 90% of the set time. The appliance uses the residual heat to continue the
cooking process until the time ends (3-20 minutes).
Setting the Duration and End Time
1. Set the heating function.
2. Press
repeatedly until the display shows the necessary clock function and the rela-
ted symbol.
3. Use the shuttle to set the necessary time. Press OK to confirm.
After 90% of the set time, an acoustic signal sounds. The appliance deactivates. The
display shows a message.
4. Press a sensor field or open the door to stop the signal.
With Duration and End Time the appliance deactivates automatically.
With Duration and End Time you must set the heating function and the temperature first.
Then you can set the clock function.
When you use the Core Temperature Sensor, Duration and End Time do not work.
Heat + Hold
You can activate or deactivate the function in the Basic Settings menu.
The Heat + Hold function keeps prepared food warm at 80°C for 30 minutes. It activates
after the baking or roasting procedure ends.
Conditions for the function:
The set temperature is more than 80°C.
The function Duration is set.
Activating the function
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80°C.
4. Press
again and again until the display shows Heat + Hold . Press OK to confirm.
When the function ends, an acoustic signal sounds.
The Heat + Hold function operates for 30 minutes.
The Heat + Hold function stays on if you change the heating functions.
Extra Time
The Extra Time makes the heating function continue after the Duration ends.
Clock functions
17
Applicable for all heating functions with Duration or Weight Automatic.
Not applicable for heating functions with Core Temperature Sensor.
Activating the function:
1. When the cooking time ends, an acoustic signal sounds. Press any sensor field.
2. The display shows the message for Extra Time for five minutes.
3. Press
to activate (or to cancel).
4. Set the Extra Time period. Press OK to confirm.
AUTOMATIC PROGRAMMES
WARNING!
Refer to "Safety information" chapter.
Assisted Cooking with Recipe Automatic
This appliance has a set of recipes you can use. Recipes are fixed and you cannot change
them.
Activating the function:
1. Activate the appliance.
2. Select the Assisted Cooking menu. Press OK to confirm.
3. Select the category and dish. Press OK to confirm.
4. Select Recipe Automatic . Press OK to confirm.
When you use the Manual function, the appliance uses automatic settings. You can change
them as with other functions.
Assisted Cooking with Weight Automatic
This function calculates automatically the roasting time. To use, it you need to input the
food weight.
Activating the function:
1. Activate the appliance.
2. Select Assisted Cooking . Press OK to confirm.
3. Select the category and dish. Press OK to confirm.
4. Select Weight Automatic . Press OK to confirm.
5. Use the shuttle to set the food weight. Press OK to confirm.
The automatic programme starts. You can change the weight at any time. Use the shuttle
to change the weight. When the time ends, an acoustic signal sounds. Press a sensor field
to deactivate the signal.
With some programmes, turn over the food after 30 minutes. The display shows a reminder.
18 Automatic programmes
Favourite Programme
You can store your favourite settings like duration, temperature or heating function. They
are available in the Favourite Programme menu. You can store up to 20 programmes.
Storing a programme
1. Activate the appliance.
2. Select the heating function or the Assisted Cooking function.
3. Press
again and again until the display shows " SAVE ". Press OK to confirm.
4. The display shows the first empty memory position.
Press OK to confirm.
5. The first letter flashes.
Use the shuttle to change the letter. Press OK.
6. Turn the selector to move the cursor to the right or to the left. Press OK.
The letter flashes.
7. Repeat steps 5 and 6 again to write the name of the programme.
Press and hold OK to save.
Press and hold for 3 seconds to save the current programme in Favourite Programme
You can overwrite a memory position. Refer to section „Storing a programme“. At step 4
use the shuttle to overwrite an existing programme.
You can change the name of a programme in the menu “Edit Programme Name”.
Activating the programme
1. Activate the appliance.
2. Select the Favourite Programme menu. Press OK to confirm.
3. Select your favourite programme name. Press OK to confirm.
Press to go to Favourite Programme directly, also from the off state.
USING THE ACCESSORIES
WARNING!
Refer to "Safety information" chapter.
Core temperature sensor
The core temperature sensor measures the core temperature of the meat. When the meat
reaches the set temperature, the appliance deactivates automatically.
You have to set:
The appliance temperature
The core temperature
Using the accessories
19
Use only original parts. It ensures the best cooking result.
Using the core temperature sensor:
1. Put the tip of the core temperature sensor into the centre of the meat.
2. Activate the appliance.
3. Put the plug of the core temperature
sensor into the socket on the right-up-
per side of the cavity front.
The display shows the core temperature
sensor.
4. Use the shuttle in less than 5 seconds to
set the core temperature.
5. Set the heating function and, if neces-
sary, the temperature.
The appliance calculates an approximate
end time. The end time varies for differ-
ent quantities of food, the set tempera-
tures (minimum 120°C) and the operat-
ing modes. The appliance calculates the
end time in approximately 30 minutes.
The core temperature sensor must stay in the meat and in the socket during the cooking
process.
6. When the meat reaches the set core temperature, an acoustic signal sounds. The appli-
ance deactivates automatically.
Use any key to stop the signal.
7. Remove the core temperature sensor plug from the socket and remove the meat from
the appliance.
To change the core temperature, press .
WARNING!
The core temperature sensor is hot! There is a risk of burns! Be careful when you remove
the tip and the plug of the core temperature sensor.
20 Using the accessories
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Aeg-Electrolux BS9304001M User manual

Type
User manual

The Aeg-Electrolux BS9304001M is an EN Oven that offers a variety of features to make cooking easier and more efficient. With its core temperature sensor, you can accurately measure the internal temperature of your food to ensure it is cooked to perfection. The oven also includes a variety of automatic programs that take the guesswork out of cooking, and its steam cooking function allows you to prepare healthy and flavorful dishes. Additionally, the oven's self-cleaning function helps to keep it clean and hygienic.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI