VQC7399
F1209RE0
12
12 34
SETUP MIC
1
2
3
4
1
FRONT
Lch
Easy Setting Guide
The order of setting
Prepare the speakers Place the speakers
Refer to the rear label of the speaker before connecting the
corresponding cable.
Verify the type of speaker with the label on the rear of the
speaker.
Speakers
Front speakers FRONT/AVANT
Center speaker CENTER/CENTRE
Surround speakers SURROUND/AMBIOPHONIE
Blu-ray Disc Home Theater Sound System
Model No. SC-BT330
e.g.,
Prepare the
speakers
See below
Place the speakers
See below
Connect the
cables
See over
Turn on the
main unit
See over
Smart setup
See Smart setup screen
Auto speaker setup microphone
(included)
Place the Auto speaker setup
microphone at the actual seating
position. (At ear level when seated.)
Main unit’s front panel
GREEN
GRAY
C
RS
RED
R
WHITE
PURPLE
BLUE
LS
SW
L
Recommended
Front speakers
(L, R)
60
120
Surround speakers
(LS, RS)
Label each speaker cable by
attaching the numbered sticker
at the position indicated in the
illustration. Be sure to match the
number on each sticker with the
circled number in the illustration.
Connect the speaker cables.
Insert the wire fully, taking care
not to insert beyond the wire
insulation.
: White
: Blue line
e.g., Front speaker Lch
PUSH!
Front
speakers
Surround
speakers
Center
speaker
Subwoofer
Step 3
Step 4
Step 1 Step 2
WHITE
White
Blue line
Slide into the
groove.
Tighten securely.
Position the
cable between
the ridges.
Leave about
120 mm (4
23
/32)
Tighten securely.
Front speaker
Stand
Base
speaker
Lch
WHITE
Rch
RED
Rch
GRAY
GREENPURPLE
Press into the groove.
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
: White
: Blue line
Lch
BLUE
PUSH!
3
4
3
12 4
AC IN
VIDEO IN
AUDIO OUT
L
R
AV IN
OPTICAL
OUT
LAN
AV
OUT
OPT
VIDEO
OUT
AUX
L
R
(ARC)
5
2
1
3
Ω
6
Ω
6
Ω
FRONTCENTERSUBWOOFER
R L
6
4
3
3
Ω
SURROUND
R L
OPTICAL
21
DIGITAL AUDIO IN
FM ANT
(
75
Ω
)
CANCEL
VOL
1 2 3
4 5 6
7 8
0
9
BD/SD
iPod
EXT-IN
MUTE
RADIO
ABC
DEF
JKL
MNO
TUV
GHI
QRS
P
XYZ
W
@.
_,
VOL
TV
INPUT
R6/LR6, AA
5
6Ω
ENTER
LAN
(
10BASE-T/
100BASE-TX
)
OK
RETURN
Smart setup
Would you like to start smart setup?
Voulez-vous amorcer le Réglage intelligent ?
¿Quiere empezar la Smart Setup?
No/Non/No
Yes/Oui/Sí
Connect the cables by color or by the numbers indicated in the illustration to
the appropriate terminals on the rear panel of the unit.
Main unit
Main unit’s speaker
terminals (rear panel)
PURPLE GREEN RED WHITE GRAY BLUE
Connect the cables
For detailed information, refer to the operating instructions.
FM indoor antenna
(included)
Adhesive tape
TV
Turn on the main unit
Connect the AC power supply
cord
Connect the AC power supply cord
to the main unit before connecting to
the household AC outlet.
AC power supply cord
(included)
To a household AC outlet
(AC 120 V, 60 Hz)
Turn on the TV
Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this
unit.
Broadband Network Connections (Optional)
By connecting this unit to the network, you can use the BD-Live and
VIERA CAST features.
Main unit
Shielded LAN cable
(not included)
Modem (Broadband)
• Provided by ISP
Press [, ] to select [Yes/Oui/Sí].
*
2
If you want to restart the Smart setup:
Refer to “STEP 6: Smart setup / Easy setup” in the operating
instructions.
Broadband router, etc.
Other connection
Press [ ] to turn
on the main unit.
Installing batteries in the
remote control
The Smart setup starts
The on screen display will guide you through the steps.*
2
Turn on the main unit
Video cable*
1
(included)
HDMI cable (not included)
(Recommended for highest quality
picture)
Optical digital audio cable (not included)
Audio cable (not included)
Audio connection
For best quality audio,
use the HDMI cable (with
an ARC compatible TV)
or an optical digital audio
cable.
If your TV does not
support the above, use
the audio cable.
*
1
Make sure that this
video connection is
made to view photos/
videos from the iPod/
iPhone.
/