Grizzly Sander G1071 User manual

Brand: Grizzly

Model: Sander G1071

Type: User manual

This manual is also suitable for

G1071

Grizzly Sander G1071

The Grizzly Sander G1071 is a powerful and versatile sander that is perfect for a variety of woodworking projects. With its 1 HP motor and 1725 RPM spindle speed, the G1071 can quickly and easily sand even the hardest woods. The cast iron table tilts 45 degrees to the left and 20 degrees to the right, making it easy to sand at any angle. The G1071 also features a 4-inch dust port that helps to keep your work area clean.

Here are some of the possible use cases for the Grizzly Sander G1071:

Sanding flat surfaces
Sanding curved surfaces
Sanding edges
Sanding moldings

Grizzly Sander G1071

Here are some of the possible use cases for the Grizzly Sander G1071:

Sanding flat surfaces
Sanding curved surfaces
Sanding edges
Sanding moldings

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2Model G1071

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G1071 OSCILLATING SPINDLE SANDER

Product Dimensions:

Weight.............................................................................................................................................................. 292 lbs.

Length/Width/Height.................................................................................................................35-3/8 x 25-3/8 x 43 in.

Foot Print (Length/Width)............................................................................................................................. 16 x 16 in.

Shipping Dimensions:

Type............................................................................................................................................................. Cardboard

Content............................................................................................................................................................Machine

Weight.............................................................................................................................................................. 296 lbs.

Length/Width/Height............................................................................................................................. 29 x 26 x 37 in.

Electrical:

Switch..............................................................................................................On/Off Paddle Switch with Safety Lock

Switch Voltage......................................................................................................................................................110V

Cord Length............................................................................................................................................................ 9 ft.

Cord Gauge....................................................................................................................................................16 gauge

Minimum Circuit Size............................................................................................15 amps at 110V, 10 amps at 220V

Plug Included.......................................................................................................................................................... Yes

Motors:

Main

Type..................................................................................................................TEFC Capacitor Start Induction

Horsepower.................................................................................................................................................1 HP

Voltage.................................................................................................................................................110/220V

Prewired......................................................................................................................................................110V

Phase........................................................................................................................................................Single

Amps..........................................................................................................................................................14/7A

Speed.................................................................................................................................................1725 RPM

Cycle..........................................................................................................................................................60 Hz

Number Of Speeds........................................................................................................................................... 1

Power Transfer ................................................................................................................................Direct Drive

Bearings..................................................................................................Shielded and Permanently Lubricated

Main Specifications:

Table Info

Table Width................................................................................................................................................25 in.

Table Length.............................................................................................................................................. 25 in.

Table Thickness.....................................................................................................................................1-1/8 in.

Table Tilt...........................................................................................................................Left 45, Right 20 deg.

Table Opening........................................................................................................................................6-7/8 in.

Table Inserts.................................................................................................................................................2 in.

Floor To Table Height.......................................................................................................................... 35-1/2 in.

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 2Model G1071

Spindle Info

Spindle Diameters...............................................................................1/4, 3/8, 1/2, 5/8, 3/4, 1, 1-1/2, 2, 3, 4 in.

Spindle Lengths...................................................................................................................................5, 6, 9 in.

Spindle Speed....................................................................................................................................1725 RPM

Spindle Oscillations................................................................................................................................72 SPM

Stroke Length.........................................................................................................................................1-1/2 in.

Arbor Size..................................................................................................................................................3/4 in.

Total Arbor Length............................................................................................................................... 10-3/4 in.

Construction

Base Construction.........................................................................................................................Formed Steel

Stand Construction........................................................................................................................Formed Steel

Table Construction.................................................................................................................. Ground Cast Iron

Frame Construction......................................................................................................................... Sheet Metal

Paint...........................................................................................................................................Powder Coated

Other

No. Of Dust Ports..............................................................................................................................................1

Dust Port Size.............................................................................................................................................. 4 in.

Mobile Base..............................................................................................................................................G8683

Other Specifications:

Country Of Origin ..............................................................................................................................................Taiwan

Warranty ............................................................................................................................................................1 Year

Serial Number Location ...................................................................................................ID Label on Center of Stand

Awards .....................................................................................................................Wood Magazine Top Value 1999

Assembly Time ...........................................................................................................................................45 minutes

Features:

Features Ground Steel Table Inserts

Includes Formed and Welded Steel Stand

100 Grit Sleeve Included for Each Spindle

Cast Iron Table

Table Tilts 45 deg.