Bauknecht BKCIC 3C26 F Setup and user guide

Brand: Bauknecht

Model: BKCIC 3C26 F

Category: Dishwashers

Type: Setup and user guide

Bauknecht BKCIC 3C26 F is a dishwasher with various features to help you clean your dishes efficiently and conveniently. It offers six wash programs tailored to different types of loads, including Eco, Sensor, Intensive, Daily, Good Night, and Express 30’. Additionally, it has options for Delay, Extra Dry, Tablet, and Multizone, allowing you to customize the wash cycle based on your needs and preferences. The machine also features indicators for salt refill and rinse aid refill, ensuring optimal performance.

DAILY REFERENCE

GUIDE

Before using the appliance carefully read Health and Safety guide.

APPLIANCE

PRODUCT DESCRIPTION

CONTROL PANEL

THANK YOU FOR BUYING A BAUKNECHT PRODUCT.

In order to receive a more complete assistance, please

www.bauknecht.eu/register

You can download the Safety Instructions and the

Use and Care Guide, by visiting our website

docs.bauknecht.eu and following

the Instructions on the back of this booklet.

1 2 3 4 5 6 7 8 9 10 11 12 13

1. On-O/Reset button with indicator light

2. Program selection button

3. Salt rell indicator light

4. Rinse Aid rell indicator light

5. Program number and delay time indicator

6. Delay indicator light

7. Display

8. Multizone indicator light

9. Delay button

10. Multizone button

11. Turbo button with indicator light

12. Extra Dry button with indicator light

13. Tablet (Tab) button with indicator light

1. Upper rack

2. Cutlery rack

3. Foldable aps

4. Upper rack height adjuster

5. Upper spray arm

6. Lower rack

7. Lower spray arm

8. Filter Assembly

9. Salt reservoir

10. Detergent and Rinse Aid dispensers

11. Rating plate

12. Control panel

0000 000 00000

Service:

FIRST TIME USE

SALT, RINSE AID AND DETERGENT

ADVICE REGARDING THE FIRST TIME USE

After installation, remove the stoppers from the racks and the reta-

ining elastic elements from the upper rack.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and

on the machine’s functional components.

• It is important that the salt reservoir be never empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher

(see PRODUCT DESCRIPTION) and should be lled when the SALT

REFILL indicator light in the control panel is lit .

1. Remove the lower rack and unscrew the

reservoir cap (anticlockwise).

2. Only the rst time you do this: ll the salt re-

servoir with water.

3. Position the funnel (see gure) and ll the salt

reservoir right up to its edge (approximately

1 kg); it is not unusual for a little water to leak

out.

4. Remove the funnel and wipe any salt residue

away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get

into the container during the wash program (this could damage the

water softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the

procedure before the beginning of the washing cycle.

SETTING THE WATER HARDNESS

To allow the water softener to work in a perfect way, it is essential that

the water hardness setting is based on the actual water hardness in

your house. This information can be obtained from your local water

supplier.

The factory setting is for avarage (3) water hardness.

•SwitchontheappliancebypressingtheON/OFF button.

•SwitchotheappliancebypressingtheON/OFF button.

•HolddownbuttonP for 5 seconds, until you hear a beep.

•SwitchontheappliancebypressingtheON/OFF button.

•Thecurrentselectionlevelnumberandthesaltindicatorlightboth

ash.

•PressbuttonP to select the desired hardness level (see WATER

HARDNESS TABLE).

•SwitchotheappliancebypressingtheON/OFF button.

Setting is complete!

As soon as this procedure is complete, run a program without loading.

Only use salt that has been specically designed for dishwashers.

After the salt has been poured into the machine, the SALT REFILL indi-

cator light switches o.

If the salt container is not lled, the water softener and the

heating element may be damaged as a result.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser A should

be lled when the RINSE AID REFILL indicator light in the control

panel is lit.

1. Open the dispenser B by pressing and pulling up the tab on the lid.

2. Pour in the rinse aid (max.110 ml), making sure it does not overow

from the dispenser. If this happens, clean the spill immediately with a

dry cloth.

3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the appliance tub.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satised with the drying results, you can ad-

just the quantity of rinse aid used.

•SwitchthedishwasheronusingtheON/OFF button.

•SwitchitousingtheON/OFF button.

•PressbuttonP three times - a beep will be heard.

•SwitchitonusingtheON/OFF button.

•Thecurrentselectionlevelnumberandrinseaidindicatorlightash.

•PressbuttonP to select the level of rinse aid quantity to be

supplied.

•SwitchitousingtheON/OFF button

Setting is complete!

If the rinse aid level is set to ZERO (ECO), no rinse aid will be supplied. The

LOW RINSE AID indicator light will not be lit if you run out of rinse aid.

A maximum of 4 levels can be set according to the dishwasher model. The

factory setting is specic to the model, please follow instruction above

to check this for your machine.

• If you see bluish streaks on the dishes, set a low number (1-2).

• If there are drops of water or limescale marks on the dishes, set a

mid-range number (3-4).

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser

use the opening device A. Introduce

the detergent into the dry dispenser

B only. Place the amount of

detergent for pre-washing directly

inside the tub.

1. When measuring out the detergent re-

fer to the mentioned earlier information

to add the proper quantity. Inside the

dispenser B there are indications to help

the detergent dosing.

2. Remove detergent residues from the edges of the dispenser and

close the cover until it clicks.

3. Close the lid of the detergent dispenser by pulling it up until the

closing device is secured in place.

The detergent dispenser automatically opens up at the right time

according to the program.

If all-in-one detergents are used, we recommend using the TABLET

button, because it adjusts the program so that the best washing and

drying results are always achieved.

Water Hardness Table

Level

°dH

German degrees

°fH

French degrees

1 Soft 0 - 6 0 - 10

2 Medium 7 - 11 11 - 20

3 Average 12 - 17 21 - 30

4 Hard 18 - 34 31 - 60

5 Very hard 35 - 50 61 - 90

PROGRAMS TABLE

Instructions on wash cycle selection.

ECO

Normally soiled crockery. Standard program, the most ecient in

terms of its combined energy and water consumption.

SENSOR

For normally soiled dishes with dried food residues. Senses the level of

soiling on the dishes and adjusts the program accordingly. When the

sensor is detecting the soil level an animation appears in the display

and the cycle duration is updated.

INTENSIVE

Program recommended for heavily soiled crockery, especially suitable

for pans and saucepans (not to be used for delicate items).

DAILY

Normally soiled crockery. Everyday cycle, that ensures optimal

cleaning performance in shorter time.

GOOD NIGHT

Suitable for night-time operation of the appliance. Ensures optimal

cleaning and drying performance with the lowest noise emission.

EXPRESS 30’

Program to be used for lightly-soiled dishes with no dried food

residues.

GLASS

Program for delicate items, which are more sensitive to high tempera-

tures, for example glasses and cups.

PRE-WASH

Use to refresh crockery planned to be washed later. No detergent to be

used with this program.

Notes:

Please note that cycles like Express or 1h Wash&Dry are most eective for

lightly soiled dishes.

To reduce consumption even further, only run the dishwasher

when it is full.

PROGRAMS DESCRIPTION

Program

Drying

ActivEco

Available

options

Detergent

container

Duration

of wash

program

(h:min)

**)

Water con-

sumption

(litres/cycle)

Energy con-

sumption

(kWh/cycle)

Tub

1. Eco 50°

3:10 9,5 0,93

2. Sensor

50-

60°

1:25 - 3:00 7,0 - 14,0 0,90 - 1,40

3. Intensive 65°

2:50 16,0 1,60

4. Daily 50°

- 1:35 13,0 1,15

5. Good Night 50°

- 3:30 15,0 1,15

6. Express 30’ 50°

- -

- 0:30 9,0 0,55

7. Glass 45°

1:40 11,5 1,20

8. Pre-Wash

- - -

- -

0:12 4,5 0,01

ECO program data is measured under laboratory conditions according to European Standard EN 50242. Note for Test Laboratories: For information on

comparative EN testing conditions, please send an email to the following address: [email protected]

Pre-treatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

**) The duration of the program shown on the display or in the booklet is an estimate calculated on standard conditions. The actual time may vary

depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load,

load balancing, additional selected options and sensor calibration. The sensor calibration can increase program duration up to 20 min.

Standby consumption: Left-on mode consumption: 6 W - O mode consumption: 0.5 W

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times

and beeps will sound. The option will not be enabled.

DELAY

The start time of the program may be delayed for a period

of time between 1 and 12 hours.

1. Press the DELAY button: the corresponding symbol

appears on the display; each time you press the button,

the time (1h, 2h, etc. up to max. 12h) from the start of

the selected wash cycle will be increased.

2. Select the wash program and close the door: the timer

will begin counting down;

3. Once this time has elapsed, the indicator light switches

o and the wash cycle begins.

To adjust the delay time and select a shorter period of

time, press the DELAY button. To cancel it, press the

button repeatedly until the selected delayed start

indicator light switches o.

The wash program will start automatically as soon as the

door is shut.

The Delay function cannot be set once a wash cycle

has been started.

MULTIZONE

If there are not many dishes to be washed, a half loading

may be used in order to save water, electricity and

detergent.

Select the program and then press the MULTIZONE

button: the symbol of the chosen rack will appear on

the display.

By default the appliance washes dishes in all racks.

To wash only the specic rack, press this button

repeatedly:

shown on the display (only lower rack)

shown on the display (only upper rack)

shown on the display (only cutlery rack)

shown on the display (option is OFF and the appliance

will wash dishes in all racks).

Remember to load the upper or lower rack only, and

to reduce the amount of detergent accordingly.

TURBO

This option can be used to reduce the duration of the

main programs while maintaining the same washing

and drying performance levels.

After selecting the program, press the TURBO button

and the indicator light will switch on. To deselect the

option, press the same button again.

EXTRA DRY

To improve the drying of the dishes, after selecting the

program, press the EXTRA DRY button and the indicator

light comes on.

A higher temperature during the nal rinse and an

extended drying phase allow for improving drying. To

deselect the option, press the same button again. The

EXTRA DRY option results in the lengthening of the wash

cycle.

TABLET

This setting allows you to optimize the performance of

the program according to the type of detergent used.

Press the TABLET button (the indicator light will switch

on) if you use combined detergents in tablet form

(rinse aid, salt and detergent in 1 dose).

If you use powder or liquid detergent, this option

should be o.

ActivEco

ActivEco is a convection drying system which automatically opens the

door during/after drying phase to ensure exceptional drying perfor-

mance every day. Door opens at the temperature that is safe to your

kitchen furniture, thus door will not be opened when the option of

SANI RINSE or TURBO are on.

As additional steam protection, special designed protection foil is ad-

ded together with the dishwasher. To see how to mount protection foil

please refer to (INSTALLATION GUIDE).

ActivEco functionality could be disabled by the user as follows:

1. Go to the Dishwasher software menu pressing

and holding P button (6 sec).

2. You switched to ActivEco Control Menu, you could change

status of ActivEco functionality by pressing P button:

E – enabled d – disabled

To conrm the change and exit from the Control Menu please press

and hold P button (3 sec).

DAILY USE

TIPS

Before loading the baskets, remove all food residues from the croc-

kery and empty the glasses. You do not need to rinse beforehand

under running water.

Arrange the crockery so that it is held in place rmly and does

not tip over; and arrange the containers with the openings facing

downwards and the concave/convex parts placed obliquely, thus

allowing the water to reach every surface and ow freely.

Warning: lids, handles, trays and frying pans do not prevent the

sprayer arms from rotating. Place any small items in the cutlery

basket. Very soiled dishes and pans should be placed in the lower

basket because in this sector the water sprays are stronger and

allow a higher washing performance.

After loading the appliance, make sure that the sprayer arms can

rotate freely.

HYGIENE

To avoid odour and sediment which can be accumulated in the

dishwasher please run a high temperature program at least one

a month. Use a tea spoon of detergent and run it without the

loading to clean your appliance.

UNSUITABLE CROCKERY

• Wooden crockery and cutlery.

• Delicate decorated glasses, artistic handicraft and antique

crockery. Their decorations are not resistant.

• Parts in synthetic material which do not withstand high

temperatures.

• Copper and tin crockery.

• Crockery soiled with ash, wax, lubricating grease or ink.

The colours of glass decorations and aluminium/silver pieces

can change and fade during the washing process. Some types of

glass (e.g. crystal objects) can become opaque after a number of

wash cycles too.

DAMAGE TO GLASS AND CROCKERY

• Only use glasses and porcelain guaranteed by the manufac-

turer as dishwasher safe.

• Use a delicate detergent suitable for crockery.

• Collect glasses and cutlery from the dishwasher as soon as

the wash cycle is over.

ADVICE AND TIPS

1. CHECK WATER CONNECTION

Check that the dishwasher is connected to the water

supply and that the tap is open.

2. SWITCH ON THE DISHWASHER

Open the door and press the ON/OFF button.

3. LOAD THE RACKS (see LOADING THE RACKS).

4. FILLING THE DETERGENT DISPENSER

(see PROGRAMS TABLE).

5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE

Select the most appropriate program in accordance with

the type of crockery and its soiling level (see PROGRAMS

DESCRIPTION) by pressing the P button.

Select the desired options (see OPTIONS AND FUNCTIONS).

6. START

Start the wash cycle by closing the door. When the program

starts you hear a beep.

7. END OF WASH CYCLE

The end of the wash cycle is indicated by beeps and by the

ashing of the wash cycle number on the display. Open the

door and switch o the appliance by pressing the ON/OFF

button.

Wait for a few minutes before removing the crockery - to

avoid burns.

Unload the racks, beginning with the lower one.

The machine will switch o automatically during certain

extended periods of inactivity, in order to minimise electri-

city consumption. If the crockery is only lightly soiled or if

it has been rinsed with water before being placed in the di-

shwasher, reduce the amount of detergent used accordingly.

MODIFYING A RUNNING PROGRAM

If a wrong program was selected, it is possible to change it,

provided that it has only just begun: open the door, press and hold

the ON/OFF button, the machine will switch o.

Switch the machine back on using the ON/OFF button and select

the new wash cycle and any desired options; start the cycle by

closing the door.

ADDING EXTRA CROCKERY

Without switching o the machine, open the door (be ware

of HOT steam!) and place the crockery inside the dishwasher.

Close the door and the cycle will begin from the point at which

it was interrupted.

ACCIDENTAL INTERRUPTIONS

If the door is opened during the wash cycle, or if there is a power

cut, the cycle stops. It starts again from the point at which it was

interrupted once the door has been closed or the electricity

supply is restored.

For more information about the functions, you can request or do-

wnload from the WEB a Use & Care Guide by following the instruc-

tions on the last page.

LOADING THE RACKS

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable aps can be positioned at

three dierent heights to optimize the arrange-

ment of crockery inside the rack. Wine glasses

can be placed safely in the foldable aps by

inserting the stem of each glass into the cor-

responding slots. For optimum drying results

incline the foldable aps more. To change the

inclination, pull up the foldable ap, slide it sli-

ghtly and position it as you wish.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids

should ideally be placed at the sides to avoid interferences with the

spray arm. The lower rack has tip-up supports which can be used in a

vertical position when arranging plates or in a horizontal position (lo-

wer) to load pans and salad bowls easily.

(loading example for the lower rack)

CUTLERY RACK

The third rack was designed to house the cutlery. Arrange the cutlery

as shown in the gure. A separate arrangement of the cutlery makes

collection easier after washing and improves washing and drying

performance.

Knives and other utensils with sharp edges must be placed in the

cutlery basket with the blades facing downwards or they must be

positioned horizontally in the tip-up compartments on the upper rack.

The geometry of the rack makes it possible to place such small items

as coee cups in the area in the middle.

UPPER RACK

Load delicate and light dishes: glasses, cups, saucers, low salad bowls.

(loading example for the upper rack)

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted: high position to place

bulky crockery in the lower basket and low position to make the most

of the tip-up supports by creating more space

upwards and avoid collision with the items

loaded into lower rack. The upper rack is equ-

ipped with a Upper Rack height adjuster (see

gure), without pressing the levers, lift it up by

simply holding the rack sides, as soon as the

rack is stable in its upper position.

To restore to the lower position, press the levers

A at the sides of the rack and move the basket

downwards.

We strongly recommend that you do not

adjust the height of the rack when it is loaded.

NEVER raise or lower the basket on one side only.

CARE AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY

Regularly clean the lter assembly so that the lters do not clog and

that the waste water ows away correctly. The lter assembly consists

of three lters which remove food residues from the washing water

and then recirculate the water: to obtain the best washing results, you

need to keep them clean.

The dishwasher must not be used without lters or if the lter is

loose.

After several washes, check the lter assembly and if necessary clean it

thoroughly under running water, using a non-metallic brush and follo-

wing the instructions below:

1. Turn the cylindrical lter A in an anti-clockwise direction and pull it out

(Fig 1).

2. Remove the cup lter B by exerting a slight pressure on the side

aps (Fig 2).

3. Slide out the stainless-steel plate lter C (Fig 3).

4. Inspect the trap and remove any food residues. NEVER REMOVE

the wash-cycle pump protection (black detail) (Fig 4).

After cleaning the lters, re-place the lter assembly and x it in posi-

tion correctly; this is essential for maintaining the ecient operation

of the dishwasher.

CLEANING THE SPRAY ARMS

On occasions, food residue may become encrusted onto the spray

arms and block the holes used to spray the water. It is therefore recom-

mended that you check the arms from time to time and clean them

with a small non-metallic brush.

To remove the upper spray arm, turn the plastic locking ring in an an-

ticlockwise direction. The upper spray arm should be replaced so that

the side with the greater number of holes is facing upwards.

The lower spray arm may be removed by pulling it upwards.

CLEANING THE WATER INLET HOSE

If the water hoses are new or have not been used for an extended

period of time, let the water run to make sure it is clear and free of

impurities before performing the necessary connections. If this

precaution is not taken, the water inlet could become blocked and

damage the dishwasher.

Your dishwasher may not work properly.

Before contacting the Service Centre check if the problem can be solved by going through the following list.

PROBLEMS POSSIBLE CAUSES SOLUTIONS

The dishwasher

won’t start

or does not

respond to

commands.

The appliance has not been plugged

in properly.

Insert the plug into the socket.

Power outage. The dishwasher starts automatically when the power returns.

The dishwasher door is not closed. Vigorously push the door until you hear the “click”.

It does not respond to commands.

Switch o the appliance by pressing the ON/OFF button, switch it back

on after approximately one minute and reset the program.

The dishwasher

won’t drain.

The wash cycle has not nished yet. Wait until the wash cycle nishes.

The drain hose is bent. Check that the drain hose is not bent (see INSTALATION INSTRUCTION).

The sink drain pipe is blocked. Clean the sink drain pipe.

The lter is clogged up with food

residues.

Clean the lter (see CLEANING THE FILTER ASSEMBLY).

The dishwasher

makes

excessive

noise.

The dishes are rattling against each Position the crockery correctly (see LOADING THE RACKS).

An excessive amount of foam has

been produced.

The detergent has not been measured out correctly or it is not suita-

ble for use in dishwashers (see FILLING THE DETERGENT DISPENSER).

Reset dishwasher by pressing the DRAIN button (see OPTIONS AND

FUNCTIONS) and run new program without detergent.

The dishes are

not clean.

The crockery has not been arranged

properly.

Arrange the crockery correctly (see LOADING THE RACKS).

The spray arms cannot rotate freely,

being hindered by the dishes.

Arrange the crockery correctly (see LOADING THE RACKS).

The wash cycle is too gentle. Select an appropriate wash cycle (see PROGRAMS TABLE).

An excessive amount of foam has

been produced.

The detergent has not been measured out correctly or it is not suitable

for use in dishwashers (see FILLING THE DETERGENT DISPENSER).

The cap on the rinse aid compartment

has not been shut correctly.

Make sure the cap of the rinse aid dispenser is closed.

The lter is soiled or clogged. Clean the lter assembly (see CARE AND MAINTENANCE).

There is no salt. Fill the salt reservoir (see FILLING THE SALT RESERVOIR).

TROUBLESHOOTING

MAINTENANCE AND TROUBLESHOOTING GUIDE

For more information, maintenance procedures and tro-

ubleshooting, see the Use and Care Guide

The Use and Care Guide can be obtained by:

• After-Sales Service; phone number see in warranty

booklet.

• download from website: docs.bauknecht.eu

• use QR code

CONTACTING AFTER-SALES SERVICE

When you contact the After-Sales Service, you must pro-

vide the codes shown on the rating plate attached to the

left or right side inside the door of the dishwasher.

The phone number is listed

in the warranty booklet or on the

website:

www.bauknecht.eu

TECHNICAL DATASHEET

The technical data containing the energy consumption

data can be downloaded from the website:

docs.bauknecht.eu

IEC 436

400011337121

01/2019 jk - Xerox Fabriano

Bauknecht BKCIC 3C26 F Setup and user guide

Brand: Bauknecht

Model: BKCIC 3C26 F

Category: Dishwashers

Type: Setup and user guide

Download PDF

report