Temperature Logger DL1KIT 0.75" x 5.38" x 5.0" (H x W x D)
USB data logger with NIST traceable probe for
temperature recordings on any SUMMIT unit;
aftermarket installation (order DL1 for pre-installation)
Highlights:
Designed for aftermarket installation only; for this option
pre-installed on a SUMMIT refrigerator, order DL1 with your unit
Includes 64 MB flash drive to hold over 2.5 million temperature
readings
Glycol bottle to simulate vaccine temperature for high accuracy
Outputs for fast viewing in Microsoft Excel or any .CSV compatible
program
NIST traceable
probe
Accurate within 1º C (1.5º C when installed on low temperature freezers operating between -30 and -25º C)
Stores data to
USB flash drive
64 MB flash drive included for easy plug-in and output on any computer
Long term data
storage
USB can hold over 2.5 million temperature readings for over 80 years of data storage
Easy analysis Simply plug the flash drive into a PC or Mac and graph or chart in Microsoft Excel or .CSV compatible program
Compact size Sized to fit on undercounter models with no depth protrusion
Power loss event
logging
Records event of power loss, allowing you to determine amount of time power was out
Programmable
time and date
Easy to set before using the device
Automatic
temperature
recording
Records interior temperature every 15 minutes
Compatible on
any Summit
model
Can be installed on refrigerators and freezers, including chest, front-opening, drawer, compact, reach-in, and
built-in undercounter units; for this data logger factory installed on your unit, order DL1
Indicator light LED blinks when in operation and goes into steady mode to alert that the USB drive is full