Operating Instructions
Home Theater Audio System
Model No. SC-HTR200
RQTV0311-2B
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
Dear customer
“EB” on the packaging indicates the United Kingdom.
Note
EB
GM
Unless otherwise indicated, illustrations show the model for The United Kingdom.
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 1 2/14/2008 11:55:15 AM
RQTV0311
2
Installing the rack ( pages 10 to 13)
Step
1
Connecting the television and DVD recorder
( page 14)
Step
2
Enjoying movies and music ( pages 20 to 23)
Step
3
For TV (VIERA) or DVD recorder (DIGA) corresponding to VIERA Link
The [DVD ONE TOUCH PLAY] button on this system’s remote control allows you to enjoy home theater
with one button press. ( page 24)
Connect with an HDMI cable for high-quality
audio and video.
This connection requires HDMI terminals on both
the television and the DVD recorder.
Recommended TV size: 42 inches or less
Enjoy surround sound with DVDs, TV, and other sources.
Step by step instructions to enjoy this home theater system.
After you have installed the rack, attach the shelf and glass
doors.
Use an optical fibre
cable for TV audio output
so that you can enjoy
surround effects.
Setting up your Home Theater system
If your equipment does not have an HDMI
terminal, refer to page 15.
(Peripheral equipment and cables not included unless otherwise mentioned.)
Before use
Setting up your Home Theater system
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 2 2/14/2008 11:55:18 AM
RQTV0311
3
Before use
Connection
Play
Reference
Setting up your Home Theater system ......... 2
Caution for AC Mains Lead ............................ 4
Safety precautions ......................................... 5
Supplied accessories ..................................... 6
Control guide .................................................. 7
Remote control preparation .......................... 9
Installing and assembling the rack ............. 10
Home Theater connections ......................... 14
Connecting equipment with HDMI terminal (TV,
DVD recorder, etc.) ............................................. 14
Connecting equipment without HDMI terminal
(DVD player, VCR, etc.) ...................................... 15
Enjoying analogue audio ................................... 16
Connecting analogue audio for TV ..................... 16
Connecting analogue audio for a Blu-ray Disc
player/DVD recorder ........................................... 16
Other connections ........................................ 17
Connecting a set top box (cable or satellite) ... 17
Connecting a combination DVD recorder/VCR ...
18
Connecting audio equipment (CD player, etc.)
through the digital terminal (coaxial) .............. 18
AC mains supply connection ...................... 19
Checking speaker output ............................. 19
Enjoying movies and music ........................ 20
Sound field .......................................................... 22
Using the VIERA Link “HDAVI Control
TM
” .. 24
DVD one-touch Home Theater operation ......... 24
VIERA Link operation (using TV’s remote control)
... 25
Functions and settings ................................ 26
Adjusting subwoofer level ................................. 26
Adjusting center speaker level ......................... 26
Using “GAME (SOUND)” .................................... 26
Muting .................................................................. 26
Adjusting the balance ........................................ 26
Adjusting sound quality .................................... 26
Adjusting speaker output .................................. 27
REAL CENTER function ..................................... 27
Reducing standby power consumption
(Standby mode) .................................................. 27
Adjusting audio timing to video timing ............ 28
Sleep timer .......................................................... 28
Clear audio at low volume ................................. 28
Switching the attenuator ................................... 28
Setting input signals .......................................... 29
Reset (factory settings) ..................................... 29
When using 2 or more Panasonic products
(stereo system, amplifier, etc.) .......................... 29
Troubleshooting guide ................................. 30
Error messages ............................................ 31
Specifications ............................................... 31
Maintenance .................................................. 31
Glossary ........................................................ 32
Table of contents
Before useConnectionPlay
Reference
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 3 2/14/2008 11:55:20 AM
RQTV0311
4
Caution for AC Mains Lead
(For The United Kingdom)
(“EB” area code model only)
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME
THEN THE FUSE SHOULD BE REMOVED
AND THE PLUG CUT OFF AND DISPOSED OF
SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring
code as stated below.
If in any doubt please consult a qualified electrician.
Figure A
Figure B
Figure A
Figur
e B
Fuse cover
WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E, BY THE EARTH SYMBOL
OR COLOURED GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type
of AC mains plug (figures A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Fuse
(5 ampere)
Fuse
(5 ampere)
2. Replace the fuse and close or attach the fuse cover.
Before use
Caution for AC Mains Lead
IMPORTANT
The wires in this mains lead are coloured in
accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the
coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured Blue must be connected
to the terminal which is marked with the letter N or
coloured Black or Blue.
The wire which is coloured Brown must be connected
to the terminal which is marked with the letter L or
coloured Brown or Red.
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 4 2/14/2008 11:55:29 AM
RQTV0311
5
Before use
Safety precautions
Safety precautions
Set the unit up on an even surface away from direct
sunlight, high temperatures, high humidity, and
excessive vibration. These conditions can damage
the unit and other components, thereby shortening
the unit’s service life.
Do not hang from or climb on the unit. This may
result in serious injury.
Place the television properly on the unit. Use the
stabilising band to prevent the television from falling
over and causing serious damage or injury.
Do not place items heavier than the recommended
weight on the unit or the shelves.
Do not use high voltage power sources. This can
overload the unit and cause a fire.
Do not use a DC power source. Check the source
carefully when setting the unit up on a ship or other
place where DC is used.
Ensure the AC mains lead is connected correctly and
not damaged. Poor connection and lead damage
can cause fire or electric shock. Do not pull, bend, or
place the unit on the lead.
Grasp the plug firmly when unplugging the lead. Do
not move the unit if AC mains lead is still connected
to socket outlet. Pulling the AC mains lead can cause
electric shock.
Do not handle the plug with wet hands. This can
cause electric shock.
Remove AC mains plug from socket outlet when not
using for a long period.
Do not let metal objects fall inside the unit. This can
cause electric shock or malfunction.
Do not let liquids get into the unit. This can cause
electric shock or malfunction. If this occurs,
immediately disconnect the unit from the power
supply and contact your dealer.
Do not spray insecticides onto or into the unit. They
contain flammable gases which can ignite if sprayed
into the unit.
Do not attempt to repair this unit by yourself. If
sound is interrupted, indicators fail to light, smoke
appears, or any other problem that is not covered
in these instructions occurs, disconnect the AC
mains lead and contact your dealer or an authorised
service centre. Electric shock or damage to the unit
can occur if the unit is repaired, disassembled or
reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from
the power source if it is not to be used for a long
time.
Glass doors
Protect the doors from scratching.
Take care not to get your fingers caught when
opening and closing the doors.
Do not touch the doors if they crack. Consult your
dealer for immediate replacement.
Placement
Voltage
AC mains lead protection
Foreign matter
Service
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 5 2/14/2008 11:55:30 AM
RQTV0311
6
Please check and identify the supplied accessories.
Use numbers when asking for replacement parts.
(Product numbers correct as of November 2007. These may be subject to change.)
2 Glass doors
(The one with the logo is for the right side.)
2 Hinges:
1 x Left (RXC0030)
1 x Right (RXC0030A)
1 AC mains lead
2 Batteries
1 Remote control
(N2QAYB000250)
Supplied accessories for rack
Supplied accessories
for amplifier
1 Shelf (RKQ1G0003-K) 4 Metal dowels (RMQ1607)
Packing plan
Logo
Left side
Right side
Shelf
Other supplied accessories
Glass doors
Batteries
Remote control
Rack
Supplied accessories
Left side
Right side
1 x Left (RXQ1538)
1 x Right (RXQ1538A)
Before use
Supplied accessories
Sales and Support Information
Customer Care Centre
For customers within the UK: 0844 844 3852
For customers within the Republic of Ireland:
01 289 8333
Visit our website for product information
E-mail: [email protected]
•
•
•
•
Direct Sales at Panasonic UK
Order accessory and consumable items for your
product with ease and confidence by phoning our
Customer Care Centre Monday-Thursday
9:00am-5:30pm, Friday 9:30am-5:30pm
(Excluding public holidays).
Or go on line through our Internet Accessory
ordering application at www.panasonic.co.uk.
Most major credit and debit cards accepted.
All enquiries transactions and distribution facilities
are provided directly by Panasonic UK Ltd.
It couldn’t be simpler!
Also available through our Internet is direct
shopping for a wide range of finished products,
take a browse on our website for further details.
Interested in purchasing an extended guarantee?
Please call 0870 240 6284 or visit our website
www.panasonic.co.uk/guarantee.
•
•
•
•
•
•
1 Ferrite core
(for HDMI cable)
(J0KG00000037)
( page 14 for application)
(K2CT3CA00004)
(K2CQ2CA00006)
For Malaysia
For the United Kingdom
For the United Kingdom
1 Cable tie
(for ferrite core)
( page 14 for application)
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 6 2/14/2008 11:55:35 AM
RQTV0311
7
This system
Rear view
Rear panel
Amplifier
Cut-outs
Control guide
Subwoofer
(left)
Control panel Center speaker
Front speaker
(right)
Subwoofer
(right)
Front view
Front speaker
(left)
Before use
Control guide
“DTS” is a registered trademark of DTS, Inc. and
“DTS Virtual” is a trademark of DTS, Inc.
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
HDAVI Control™ is a trademark of Matsushita
Electric Industrial Co., Ltd.
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 7 2/14/2008 11:55:36 AM
RQTV0311
8
Control panel
SLEEP
PCM
kHz
DIGITAL DTS
PL 2CH MI
X
SFC
VS
DIGITAL INPUT
Digital surround signal/Sound field ( page 23)
Display
When input signal is digital ( page 21)
When input signal is fixed to PCM ( page 29)
Displayed together with the sampling frequency when
PCM input signal is more than 48 kHz
General display
Amplifier
Speaker terminals
The speakers are already connected. Do not touch the connections unless absolutely necessary.
If speaker cables become disconnected, refer to the illustrations below for connection.
Speaker cable connection How to connect the speaker cables
Never short-circuit positive (+)
and negative (
―
) speaker wires.
Incorrect connection can damage
the speakers.
Digital input terminal
( pages 14, 15, 17, 18 and 24)
Speaker terminals
AC inlet
( page 19)
Grey
Yellow
Black
White
Red
Black
White (Blue line)
Blue
Control guide (cont.)
For adjusting volume ( page 20)
Standby/on switch
( pages 19 and 20)
Standby indicator
( page 19)
For using “GAME (SOUND)”
( page 26)
“SELECTOR” switch
( page 20)
HDMI terminal ( pages 14 and 24)
Audio input terminal
( pages 15 to 18)
Sleep timer indicator ( page 28)
Note
Before use
Control guide
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 8 2/14/2008 11:55:40 AM
RQTV0311
9
Digital surround signal/Sound field ( page 23)
Remote control
Remote control preparation
Inserting the batteries
Using the remote control
Do not place an object between the signal sensor and the
remote control.
Do not place the signal sensor under direct sunlight or the
strong light of a fluorescent lamp.
Keep the transmission window and the unit’s sensor free
from dust.
•
•
•
(R6/LR6, AA)
Remote control signal sensor
Press on the tab to open.
Standby/on button ( pages 19 to 21)
Input mode and remote control
mode buttons ( page 21)
For adjusting the center speaker
level ( pages 26 and 27)
For adjusting the subwoofer level
( pages 26 and 27)
For adjusting the volume
( pages 19 to 21)
Using the [DVD ONE TOUCH PLAY]
button to play a DIGA DVD recorder
( page 24)
Muting ( page 26)
For adjusting speaker balance
( page 26)
For returning to the previous menu
( pages 25 to 29)
For using “GAME (SOUND)”
( page 26)
Test signal output ( page 19)/
Adjusting speaker output (
page 27)/
To enter setup mode
( pages 25 to 29)
For adjusting settings
( pages 25 to 29)
For selecting or cancelling
Dolby Virtual Speaker and SFC mode
( pages 22 and 23)
7 meters or less (actual
distance depends on the
angle)
Transmission window
Before use
Control guide/Remote control preparation
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Do not use rechargeable type batteries.
Do not heat or expose to flame.
Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with
doors and windows closed.
•
•
•
Insert so the poles (+ and -) match those in the
remote control.
Note
Do not:
mix old and new batteries.
use different types at the same time.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can severely damage the remote control.
Remove the batteries if the remote control is not going to be
used for a long period of time. Store in a cool, dark place.
•
•
•
•
•
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 9 2/14/2008 11:55:42 AM
RQTV0311
10
Installation
Setup example
This system
This system
This system
Installing and assembling the rack
B
A
Glass door assembly
Speaker net
Shelf assembly
At least two people should be available to assist with setup and installation to reduce the chances of
fingers getting caught and back strain.
Use a Phillips-head screwdriver. (Do not use a powered screwdriver.)
Choose a stable location for installation.
Handle the glass doors with care.
Place the rack on a flat, stable surface so there is no danger of it falling over. Take precautions if such a
surface is not available.
You can install this unit so that it is flush with the wall at either the sides or back, but you will require some
space for working during setup and connection.
Do not place in front of curtains as they may obstruct the unit’s vents.
Avoid pressing on the speaker nets during installation.
•
•
•
•
This unit has built-in speakers.
Do not connect other speakers. Using other
speakers may not produce the correct sound, and
furthermore can cause damage.
You cannot add surround speakers to this
system.
•
•
Lift the television when placing it on the rack. Dragging it may damage the top panel.
For details, refer to the television’s operating instructions.
Caution
Use the speakers only with the recommended system. Failure to do so can damage the amplifier and
speakers, and can cause fire.
Consult a qualified service person if damage occurs or if performance worsens.
Do not attach these speakers to walls or ceilings.
•
•
•
Note
Connection
Installing and assembling the rack
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 10 2/14/2008 11:55:47 AM
RQTV0311
11
Shelf assembly
A
Glass door assembly
B
Fully insert the metal dowels (included) in holes
front and back which are at the same height.
Do the same for the opposite side.
Put the shelf (included) on the metal dowels so they
fit into the prepared holes in the shelf.
Change the position of the dowels to move the
shelf up or down.
•
1
2
Insert the hinge (included) into the hole so the
screw faces into the unit.
Insert the glass door (included) into the upper
and lower hinges and screw in place to hold the
door temporarily.
The illustration shows how to assemble the left
door.
VIERA Link and other logo marks are on the
right door.
Adjust the height and gap of glass door, then
tighten the upper and lower screws with a
Phillips-head screwdriver.
Assemble the other door in the same way.
Do not over-tighten the screws.
Use a Phillips-head screwdriver that matches
the size of the screws.
•
•
•
•
•
1
2
3
Hole
Metal dowel
Hole
Hole
Hinge
Phillips-head
screwdriver
Screw
Inner side of door
Under the shelf
Shelf
Left door
Inner side of door
Lower hinge
Upper hinge
Edge
Connection
Installing and assembling the rack
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 11 2/14/2008 11:55:49 AM
RQTV0311
12
Preparation
Installing a Blu-ray Disc player/DVD recorder or other equipment on the shelf
(Please also refer to the other equipment’s operating instructions.)
Installing the television (refer also to the television’s operating instructions.)
Place the television (with stand attached) in the centre of the rack.
Recommended: 42 inches or less
Installing and assembling the rack (cont.)
Use a utility knife to remove the cut-out on
the back panel of this unit after installing the
equipment.
Extend the blade of the knife between about
5 mm and 10 mm and cut with care.
Refer to pages 14 to 18 for connections with
other equipment.
When installing equipment that produces heat,
remove the cut-out to allow ventilation.
Pass the equipment’s cables through the cut-out.
•
•
•
1
2
Do not put equipment weighing more than 12 kg on the upper shelf or more than 20 kg on the lower shelf.
Image interference may occur if you put a DVD recorder, etc. on the upper shelf. Put it on the lower
shelf if this occurs.
Refer to the following table before installing equipment in the rack.
•
•
•
Attach the stand to the television.
Front view
Rear view
Cut-outs
Utility knife
Television stand
Note
Connection
Installing and assembling the rack
Dowel position Upper Middle Lower
Compartment
H
Upper shelf 98 128 158
Lower shelf 103 73 43
W 730
D 400
UNIT: mm
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 12 2/14/2008 11:55:52 AM
RQTV0311
13
Stabilising the television
Rack cautions
Attach the television to the rack to prevent it from falling over.
Attach the television to the rack with a band
(supplied with the television or available as an
accessory from your dealer).
Attach the band only using the holes prepared
on the back of the top panel of the shelf. Trying
to make new holes could damage the panel.
Use 3-mm diameter screws, 30 mm to 35 mm
in length.
•
•
Use care when putting things on the shelf.
Hot items
Hot cups may leaves marks on the rack which you may be unable
to remove.
•
Water filled vessels
Water spilled from vessels such as vases may damage the unit.
•
Screws
Prepared screw hole
Stabilising band
Connection
Installing and assembling the rack
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 13 2/14/2008 11:55:54 AM
RQTV0311
14
1 2 3 4
Connecting the optical
fibre cable
Note the
shape
and fit it
correctly
into the
terminal.
Do not bend!
Connecting equipment with HDMI terminal (TV, DVD recorder, etc.)
Connection cable
HDMI cable notes
Use a Panasonic HDMI cable for best results.
To enjoy 1125p (1080p) images, use a Panasonic cable shorter than 5.0 m to avoid image deterioration.
•
•
HDMI cable (not included) Optical fibre cable (not included)
By using the connection shown on this page,
video and audio signals are sent to the television
even if this unit is turned off. This is useful when
you want to enjoy late night viewing only with the
television’s speakers.
Using HDMI Standby
When you turn this unit off, the audio/video signals from
a recorder connected to this unit’s BD/DVD HDMI input
terminal are output through the television, even if you
have set input on this unit to anything other than “BD/
DVD” ( pages 20 and 21). (The selector returns to the
previous setting when you turn this unit on again.)
Home Theater connections
HDMI input
Digital audio out
(optical)
TV
Amplifier
Blu-ray Disc player/DVD recorder, etc.
HDMI Video/ audio out
Connect this so you can enjoy
surround effects with audio
from your television.
For analogue connection, refer
to “Connecting analogue audio
for TV” ( page 16).
Note
Connection
Home Theater connections
Attaching and securing the ferrite core (included) near to the terminal
Pull back
the tabs (in
two places)
to open.
Put the
cable and
close until
you hear
‘click’.
Hole
Insert the
included
cable tie into
the hole.
Secure the
cable tie.
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 14 2/14/2008 11:55:56 AM
RQTV0311
15
1 2 3 4
Connecting equipment without HDMI terminal (DVD player, VCR, etc.)
Connect the equipment either using A or B.
Connection cable
Optical fibre cable (not included)
Connecting the optical fibre cable
Note the
shape and fit
it correctly into
the terminal.
Do not bend!
Refer to the operating instructions for the equipment you are connecting for the correct type of
video cable.
•
Connect this so you can enjoy
surround effects with audio
from your television.
For analogue connection, refer
to “Connecting analogue audio
for TV” ( page 16).
Stereo phono cable (not included)
Turn off all components before making any
connections.
To connect equipment, refer to the appropriate
operating instructions.
•
•
TV
Digital audio out
(optical)
Connect the
video directly
from the other
equipment to the
television.
VIDEO IN AUDIO IN
Video cable
Audio cable
Amplifier
DVD player,
VCR, etc.
R L
Digital audio out
(optical)
VIDEO OUT
AUDIO OUT
Connection
Home Theater connections
Use this connection
so audio from the
equipment can be heard
through the television’s
speakers even if this
unit is in standby mode.
Audio out
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 15 2/14/2008 11:55:58 AM
RQTV0311
16
Enjoying analogue audio
Connect to listen to analogue audio from the television.
Connection cable
Stereo phono cable (not included)
Connecting analogue audio for TV
Connecting analogue audio for a Blu-ray Disc player/DVD recorder
Connect the video cable directly from the other equipment to the television.
Refer to the operating instructions for the equipment you are connecting for the correct type of
video cable.
•
Home Theater connections
(cont.)
Audio out
TV
Amplifier
Amplifier
Blu-ray Disc player/
DVD recorder
R L
Use the following connection so that you can play signals that this unit cannot decode when connected through
the HDMI or digital terminals.
Turn off all components before making any
connections.
To connect equipment, refer to the appropriate
operating instructions.
•
•
Connection
Home Theater connections
Audio out
R L
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 16 2/14/2008 11:56:01 AM
RQTV0311
17
Connection
Other connections
Connect using TV input terminals.
Connect the equipment either using A or B.
Amplifier
Video
cable
R L
Digital
audio
out
(optical)
VIDEO
OUT
AUDIO
OUT
Connect the video
directly from the
other equipment to
the television.
VIDEO IN
Use this connection
so audio from the
equipment can be heard
through the television’s
speakers even if this
unit is in standby mode.
AUDIO IN
TV
Audio
cable
Cable box or
satellite receiver, etc.
Connecting a set top box (cable or satellite)
Connecting the optical fibre
cable
Note the
shape and
fit it correctly
into the
terminal.
Do not bend!
Connection cable
Optical fibre cable (not included) Stereo phono cable (not included)
Refer to the operating instructions for the equipment you are connecting for the correct type of
video cable.
•
Other connections
Turn off all components before making any
connections.
To connect equipment, refer to the appropriate
operating instructions.
•
•
Audio out
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 17 2/14/2008 11:56:03 AM
RQTV0311
18
Connection
Other connections
Connecting audio equipment (CD player, etc.) through the digital terminal (coaxial)
Connection for equipment with
DVD/VCR terminal.
Amplifier
Video
cable
R L
Digital
audio out
(optical)
DVD out
terminal
VIDEO
OUT
AUDIO
OUT
Connect the video
directly from the
other equipment to
the television.
VIDEO IN
Use this connection so
audio from the equipment
can be heard through the
television’s speakers even if
this unit is in standby mode.
AUDIO IN
TV
Audio
cable
Combination DVD
recorder/VCR
Amplifier
Digital audio out
(coaxial)
CD player, etc.
Connecting a combination DVD recorder/VCR
Connecting the optical fibre
cable
Note the
shape and
fit it correctly
into the
terminal.
Do not bend!
Connection cable
Optical fibre cable (not included) Coaxial cable (not included) Stereo phono cable (not included)
Refer to the operating instructions for the equipment you are connecting for the correct type of
video cable.
•
Other connections (cont.)
Turn off all components before making any
connections.
To connect equipment, refer to the appropriate
operating instructions.
•
•
Audio out
DVD/VCR out
terminal
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 18 2/14/2008 11:56:10 AM
RQTV0311
19
Connection
AC mains supply connection/Checking speaker output
Household
AC mains
socket
AC mains lead (included)
Connect AC mains lead after all other cables are connected.
The cooling fan operates at high power output levels only.
Standby/on switch [8]
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Standby indicator [^]
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
Standby indicator
AC mains supply connection
Appliance inlet
Approx. 6 mm
Connector
Insertion of connector
Even when the connector is perfectly inserted, depending on the
type of inlet used, the front part of the connector may jut out as
shown in the drawing. However there is no problem using the unit.
READ THE CAUTION FOR AC MAINS LEAD ON PAGE 4 BEFORE CONNECTION
Amplifier
You can check audio output with a test signal.
1. Press to turn on the unit.
2. Press to output the test signal.
Press to adjust the volume to the normal listening level.
Test signal is output from one speaker at a time for two seconds in the following
order.
L (Front left) → C (Center) → R (Front right) → SUBW (Subwoofer)
If you feel the output of the center speaker and subwoofer are not
balanced with front speakers
Adjust the speaker output according to your preference. ( page 26)
3. Press to stop the test signal.
•
•
Checking speaker output
Speaker
Standby/on switch
Conserving power
This unit consumes a small amount of power, even when it is in standby mode (approx. 0.8 W). To save
power when the unit is not to be used for a long time, unplug it from the household mains socket. You will
need to reset some memory items after plugging in this unit.
The included AC mains
lead is for use with this unit
only. Do not use it with other
equipment.
Also, do not use AC mains
lead for other equipment
with this unit.
•
•
Note
For the United Kingdom
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 19 2/14/2008 11:56:19 AM
RQTV0311
20
Turn on the television and switch its input to match the connection you have made between it
and this unit (HDMI, for example).
1
Standby/on switch
Press .
TV : TV
BD/DVD : Blu-ray Disc player/
DVD recorder
(factory setting)
AUX 1 : AUX1 terminal
AUX 2 : AUX2 terminal
Operation on the amplifier
2
Select the source
Press .
3
Start play on the other equipment
4
Adjust the volume
Press .
Enjoying movies and music
Play
Enjoying movies and music
Preparation
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 20 2/14/2008 11:56:22 AM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
