Echo Chipper CH500H(74500), CH500H(74500) User manual

  • Hello! I am an AI chatbot trained to assist you with the Echo Chipper CH500H(74500) User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MOBILE WORKSTATION!
5" & 8" Skid Steer Chippers!
Model Hydraulics Feed Opening Chipper Feed Chipper Operating
Size Capacity System Disc Weight
CH500H Standard or 5.5"x7" 3"* hydraulic 20" x 1.25" 1145
(74500) high-ow**  140lbs
CH800H High-ow*** 9"x9" 5"* hydraulic 30"x1.25" 1525
(74800) 275lbs
*Continuous chipping size rating refers to the suggested feeding size of limbs for normal operation
**Standard-ow requires a mimimum of 15 gallons per minute (GPM) hydraulic oil ow
***High-ow requires a mimimum of 25 GPM hydraulic oil ow
Model CH500H (74500)
The four-position valve easily controls
the hydraulic feed roller
The chipper has two mounts, so it can be
set to feed in front or to the curb side
Built-in hydraulic jack makes feed roller
maintenacnce quick and easy.
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O.Box849,WestFargo,ND58078
Fax:701.282.9522
5" & 8" Skid Steer Specs
Models CH500H (74500), CH800H (74800)
SKID-STEER MOUNT
CH500H(74500)tsskidsteerswithstan-
dardorhigh-owhydraulics
CH800H(74800)tsskidsteerswithhigh-owhydraulics
Twomounts,sochippercanbemountedwithfeed
tablefacingforwardortothecurbside
EasytoattachjustconnectchippertotheSAEJ2513Quick-
Tach,attachthehydraulichoses,andyouarereadytogo
HYDRAULIC FEED
Four-positionmanualvalvecontrol(Re-
verse-Neutral-Forward-Reverse).
Innitespeedsettingswithturnofahandle
Automaticfeedcontrol,whichslowsthefeed
rollerifthediscstartstoslowdown
CHIPPER DISC
CH500H(74500)hasa20"x1.25"[51cmx
3.175cm]140lb.[63.5kg]disc.Machined.
CH800H(74800)hasa30"x1.25"[76cmx3.175cm]
275lb.[125kg]disc.Machined&Balanced.
FOUR CHIPPING BLADES
Reversibleheat-treatedchippersteelblades,withchromecontent.
Bladesaremounted90degreestoeachother
forsmootheroperationandlessvibration.
FOUR EDGE ADJUSTABLE ANVIL/CUTTER BAR
Toinsuregoodchippingability.
CONTINUOUS CHIPPING SIZE
CH500H(74500)hasa5.5"x7"[14cmx18cm]chipperopen-
ingforsidelimbs,andwilchipupto3"limbscontinuously.
CH800H(74800)hasa9"x9"[23cmx23cm]chipperopen-
ingforsidelimbs,andwillchipupto5"limbscontinuously.
EASY ACCESS DISC
Thediscisaccessiblethroughthehingeddisccov-
er,whichexposesonehalfofthediscforeasyaccess
tothechipppingbladesandforeasycleanout.
INTEGRATED BLOWER
Putthechipswhereyouwantthemwiththededicatedblower.
360°rotating,6"[15cm](74500)or8"[20cm](74800)di-
ametersteeltubingwithadjustabledeectorcapallowsyou
toputthechipswhereyouwantthemthersttime.
HEAVY-DUTY CONSTRUCTION
OTHER FEATURES:
•Slip-resistantsteppadsforentryorexitfromskid-steer
•Weatherproofowner'smanualbox
Weight
•ModelCH500H(74500)–1145lbs[520kg]
•ModelCH800H(74800)–1525lbs[693kg.]
Safety
•Safetychainsstandard
•MeetsallapplicableISOandCEsafetystandards.
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O.Box849,WestFargo,ND58078
Fax:701.282.9522
/