MyBinding Formax FD 8804SC User manual
- Category
- Paper shredders
- Type
- User manual
FD 8804CC / FD 8804SC
INDUSTRIAL CONVEYOR SHREDDERS
Commercial-grade power for large volume shredding
The Formax FD 8804CC and FD 8804SC are the most advanced high volume
industrial shredders available. These high-capacity conveyor-fed shredders combine
fully-automated features with the rugged, industrial strength needed for high volume
centralized shredding.
Standard features include an LED control panel with load indicator and user-friendly
features such as Auto Start/Stop, Auto Reverse, and Auto Cleaning while providing
enough power to shred up to 125* sheets of paper in a single pass. The EvenFlow™
Automatic Oiling System lubricates the all-steel cutting blades, helping to keep the
FD 8804 in peak operating condition.
* FD 8804SC sheet capacity
Standard Features:
Lifetime Limited Warranty on cutting head
1-Year Warranty on all other parts
Warranty:
Additional Waste Bin on casters
Options:
Belt-Feed Industrial Shredding System: Designed
to shred entire les, stacks of computer forms,
cardboard, tapes, ribbons, CDs and magnetic disks
LED Control Panel: Integrated digital load indicator
and sensors
Front Waste Bin Access: Front cabinet door allows
the shredder to be placed against a wall
to maximize space savings
Auto Start/Stop Mode: Optical sensor detects
paper and starts operation automatically
Manual Mode: Shredder operates continuously for
shredding small sized paper or lms
Door Safety Sensor: Motor stops automatically if
cabinet door is opened
Auto Reverse: In case of paper jam, built-in
controls switch motor into reverse to clear jam
EvenFlow™ Automatic Internal Oiling System:
Lubricates cutting blades for optimal performance
Continuous-Duty Motor for non-stop operation
Waste Bin Full Sensor: When the waste bin is full
the motor stops automatically
Auto Cleaning: Allows the motor to run in reverse
for one minute to clear shred particles
Self-Diagnosis System: Provides a variety
of operational data with optional diagnostic reader
Heat-Treated Solid-Steel Cutters: Specially ground
for longevity and require minimal oiling
Large Safety Bar to stop operation
Mobile Waste Bin on casters
Thermal Overload Protection
Safety Circuit Breaker: Ensures safe operation
Safety Key and Lock: Provides maximum control of
the shredder
Formax - New Hampshire, USA
www.formax.com
Local Dealer:
Pressure Seal Solutions • Mailing Solutions • Data Destruction Solutions • Digital Print & Finishing Solutions
Powerful
Formax 8804 Series Industrial Shredders are powerful enough to shred entire les, stacks
of computer forms, tapes, CDs and ZIP disks with specially heat-treated solid-steel cutting
blades and a powerful AC geared-motor. The FD 8804CC shreds up to 90 sheets in one
pass and operates at a speed of up to 40 feet per minute. The FD 8804SC shreds up to
125 sheets in one pass at a speed of up to 50 feet per minute.
User-Friendly Control Panel
The 8804 Series offers unmatched automated features through its LED control panel. The easy-to-read
Load Indicator assists operators in determining how close they are to the maximum shred capacity to avoid
jams and provide optimal efciency. Indicators also notify operators when the waste bin is full or the cabinet
door is open. Operators can select from two modes of operation: Auto Start/Stop or Manual. Auto Start/
Stop mode utilizes optical sensors which detect paper and start/stop operation automatically. Manual mode
provides non-stop operation for shredding small sized paper or lms.
Designed for Safety
Safety is an important component in the 8804 Series design and engineering. A large 18”-wide safety
bar is located in front of the conveyor belt system and will shut down the shredder instantly when
pressed. A safety key and lock system is also included to ensure the shredder is operated only by
authorized staff.
8/2013
Specifications:
FD 8804CC
Cutting Style: Cross-Cut Strip-Cut
Shred Size: 1/4” x 2” 1/2”
Sheet Capacity: 75 - 90* 105 - 125*
Speed: Up to 40 fpm Up to 50 fpm
Feed Opening: 16” 16”
Dimensions: 31” W x 54” L x 43 1/2” H 31” W x 53” L x 51” H
Bin Capacity: 36 gallons 49 gallons
Weight: 661 lbs. actual weight 727 lbs. actual weight
Security Level: Level 3 (HIPAA Compliant) Level 1
Power Supply: 3-Phase, 220V, 50/60 Hz
NEMA L15-20P plug included
NEMA L15-20R receptacle required
3-Phase, 220V, 50/60 Hz
NEMA L15-20P plug included
NEMA L15-20R receptacle required
* Sheet capacity may vary due to variations in paper and power supply.
FD 8804SC
Easy to Maintain
Keeping the 8804 Series in top condition is easy to do. With the Auto Cleaning function,
clearing the blades of shredding debris is as simple as pressing Reverse on the control
panel. Plus, the EvenFlow™ Automatic Oiling System lubricates the all-steel cutting
blades, helping to keep the shredder in peak condition for optimal efciency.
User friendly LED control panel with
visual load indicator
Keyed On/Off switch
Large infeed deck with
conveyor belt feeder and
safety bar for immediate shut down
EvenFlow™Oiling System
Reservoir Bottle
Pressure Seal Solutions • Mailing Solutions • Data Destruction Solutions • Digital Print & Finishing Solutions
-
1
-
2
-
3
MyBinding Formax FD 8804SC User manual
- Category
- Paper shredders
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
MyBinding Swingline 750X User manual
-
-
-
Formax FD 8704CC User manual
-
-
-
-
Fellowes 425I User manual
-
-
Other documents
-
Dahle 21052 Datasheet
-
SEM 1201CCAF Operating instructions
-
-
-
-
-
Swingline 1758583 Datasheet
-
-
-