Cascade CPCY4201 User manual

Brand: Cascade

Model: CPCY4201

Type: User manual

I N S T R U C T I O N M A N U A L

Model Number : CPCY4201

2200W BAGLESS VACUUM CLEANER

Important Safety Instructions

Please keep this instruction manual in a safe place, along with the

warranty card, purchase receipt and carton for future reference. The

safety precautions enclosed herein reduce the risk of re, electric shock

and injury when correctly adhered to.

- If the supply cord is damaged, it

must be replaced by the manu-

facturer or its service agent or a

similarly qualified person in order

to avoid a hazard.

- Before turning on, ensure the

electrical voltage and frequency

of the circuit correspond to those

indicated on the appliance.

- The appliance is not intended for

use by young children or infirm

persons without supervision.

- Young children should be super-

vised to ensure that they do not

play with the appliance.

- Do not operate the appliance

outdoors

- Power plug must be removed

from power socket before clean-

ing, servicing, maintenance or

moving the appliance.

- When the appliance is not in use,

switch it off and unplug it.

- The appliance should be placed

on a flat surface when operating

to avoid overturning.

- To reduce the risk of electrocu-

tion, never operate this product

with wet hands, submerge under

water or spill liquids into the prod-

uct.

- Do not insert any objects into the

appliance.

- Do not kink or damage the

power cord.

- Improper installation may result in

the risk of fire, electric shock and

or injury to persons.

- The manufacturer is not respon-

sible for any eventual damages

caused by improper or faulty use.

- The unit has no user-serviceable

parts contained within. Do not

attempt to repair, disassemble or

modify the appliance.

Important Safety Instruction

- The Vacuum Cleaner is intended for household use only. Do not use

this appliance for anything other than its intended use.

- Do not operate the unit near liquids (bath-tubs, showers, water basins,

swimming pools etc).

- There is an inbuilt overheat protector which will turn the unit off if

used for too long. Switch the unit to “OFF” and it will resume normal

operation within 15 minutes.

- Ensure that all the parts are correctly assembled before operation.

- Do not use the appliance to vacuum liquids.

- Never use methylated spirits or other solvents to clean the appliance.

WARNING:

Never immerse the vacuum unit in water as this will damage the

circuitry to the motoring unit.

Cleaning the exterior of the unit :

- If the exterior of the unit needs to be cleaned, use a slightly damp

cloth to wipe down with. Clean any wet spots with a dry cloth

immediately.

WARNING: Do not immerse the unit in liquid as this will damage the

circuitry to the unit. Ensure that all parts of the vacuum cleaner are dry

before assembling for use.

Replacement Filters for your Bagless Vacuum Cleaner

- Replacement filters can be acquired by calling the Customer Helpline

on 0800 836 761. The filters are sent directly to your door for your con-

venience for a nominal fee.

Storage

- Store the vacuum on its wheels or upright in a cool, dry place.

Knowing Your Parts

1. Floor nozzle

2. Tool holder

3. Telescopic tube

4. Manual air inlet valve

5. Handle

6. Suction hose

7. Hepa-type lter assembly

8. Cord retraction button

9. Carry Handle

10. Mains cable and plug

11. ON/OFF foot switch

12. Dust cannister

Care and Cleaning Instruction

Emptying the dust container, you can easily see with the transparent dust container when

it must be emptied.

1. Switch off the vacuum cleaner and disconnect the

plug from the mains. To do this always pull on the

plug and not the cable.

2. You can pull the dust container together with the

cleaning system out of their anchoring with the aid

of the carrier handle on the dust container. Now lift

out the dust container and carry it to the waste bin.

3. A push button is located on the dust container that

you can use to open and empty it automatically

(bottom-down technology). To do this hold the dust

container over your dust bin and press on the empty

button.

4. After emptying it clean the HEPA lter if necessary

(see also Cleaning the HEPA lter below). After this

rinse out the dust container and wipe it dry.

Washing the Filter

You can pull the dust container together with the

cleaning system out of their anchoring with the aid

of the carrier handle on the dust container. Take

hold of the carrier handle on the dust container and

pull it upwards. Now pull the dust container out and

loosen the HEPA cover and HEPA lter out of the dust

container with the aid of the lateral unlocking button.

Turn the dust container cover carefully until it is

released and the HEPA lter will come away easily.

Now rinse the HEPA lter under running water and

allow it to dry.

CAUTION : Only ever clean the lter with water and

do not use soap or detergent. These would destroy

the lter.

Place the dry HEPA lter back in the HEPA cover

(or replace with a new one) and t it into the dust

container. Then t the dust container into position in

the cyclone dust container until it ts into place. Your

cyclone vacuum cleaner is now ready for use.

CAUTION : Do not place back the lter if still wet.

Using the Cleaning Accessories

• The bagless vacuum cleaner is capable of cleaning a variety of places

including hard oors, carpets, curtains and all those hard to reach places.

• Use the different accessories and attachments to suit your cleaning needs:

Dual Position carpet brush

The brush features a sliding switch to retract or extend the bristles. Extend the

bristles for shorter carpet piles or hard surfaces.

Turbo Brush

This brush features a rotating brush inside it for

extra cleaning on carpeted surfaces.

Dual Position nozzle/small brush

Position 1:

Bristles retracted; use the nozzle to reach small,

hard-to-reach places for cleaning.

Position 2:

Bristles extended; for cleaning non-oor items.

Suitable for cleaning curtains, books, furniture etc.

Using Your Bagless Vacuum

Assembling your Vacuum Cleaner

1. Before use, please ensure the electrical voltage and frequency of the circuit

corresponds to those indicated on the appliance.

2. Pull the power cable from the vacuum cleaner and insert it into the power plug.

The ‘yellow’ marker on the power cable indicates the ideal cable length. The ‘red’

marker indicates the maximum power cable length.

WARNING: Do not extend the cable beyond the red marker.

3. Switch the power point on.

4. Press the “ON/OFF” button to turn the vacuum cleaner on. It is advisable to set the

‘Suction power slide” to minimum before switching the appliance on.

5. Adjust the “Suction power slide” to the desired level for vacuuming.

6. Use the different cleaning attachments to suit the surface to be cleaned.

1. Connect the hose connector to the front cover of the vacuum

cleaner by pushing it in until it clicks into place. To release the

hose connector, push the two buttons located on the top of

the connector and pull away from the vacuum.

2. Connect the extension pole to the hose connector by pushing

it into place. Use reasonable force to push it to ensure there is

a tight seal.

3. Connect the extension pole onto the cleaning accessory by

pushing it into the corresponding hole. Use reasonable force to

ensure a tight seal .

Important features of your vacuum cleaner

1. Handle:

The ergonomically designed handle makes it easy to remove the canister when it requires

emptying

2. Dust collector and ﬁlter

The dust collector and ﬁlter work together to capture all the dust sucked in by the vacuum, while

not allowing any dust to be blown back out.

3. Extension pole

The chrome plated pole is extendable allowing the user to adjust the height to their own

preference.

4. Vacuum head

The vacuum head has dual functionality, allowing it to clean carpets as well as hard surfaces.

5. Power Slide

Slide up or down to increase or decrease the amount of suction power of the vacuum.

6. Large carry handle

The large handle has been designed to make it easy to carry when moving the vacuum cleaner.

7. Sturdy wheels

The two wheels located on the back of the unit ensure easy maneuverability while vacuuming.

Notes:

Warranty

Here at Cascade we pride ourselves on producing a range

of quality home appliances that are both packed with features

and completely reliable. We are so condent in our

products we back them up with a full 2 year replacement

warranty. Now you too can relax knowing that Cascade

have you covered.

Customer Helpline: 0800 422 274

This Product is covered by a 2 year replacement warranty when

accompanied by proof of purchase

Cascade CPCY4201 User manual

Cascade CPCY4201 User manual

Cascade CPCY4201 User manual

Related papers

Other documents