Erbauer ERB064VAC User manual

Brand
Erbauer
Model
ERB064VAC
Category
Vacuum cleaners
Type
User manual

Erbauer ERB064VAC is a 1400 W wet dry vacuum cleaner with a 50-liter capacity. It is equipped with a power take-off socket that allows for connecting an external power tool with a maximum input power of 1500 W. The vacuum cleaner automatically starts when the connected tool is switched on, and stops with a delay of 20 seconds after the tool is switched off. When used for wet vacuuming, the maximum filling height should be observed to prevent damage to the machine.

Erbauer ERB064VAC is a 1400 W wet dry vacuum cleaner with a 50-liter capacity. It is equipped with a power take-off socket that allows for connecting an external power tool with a maximum input power of 1500 W. The vacuum cleaner automatically starts when the connected tool is switched on, and stops with a delay of 20 seconds after the tool is switched off. When used for wet vacuuming, the maximum filling height should be observed to prevent damage to the machine.

50L WET/DRY VACUUM
WARRANTY
YEARS
ERB064VAC
TVC141S1-M-070924.indd 1 2007-9-25 9:45:10
TVC141S1-M-070924.indd 2 2007-9-25 9:45:10
50L WET/DRY VACUUM
GUARANTEE
This
product carries a guarantee of 24 months. If your product develops a
fault within this period, you should in the first instance contact the retailer where the
item was purchased.
This guarantee specifically excludes losses caused due to:
- Fair wear and tear
- Misuse or abuse
- Lack of routine maintenance
- Failure of consumable items (such as batteries)
- Accidental damage
- Cosmetic damage
- Failure to follow manufacturer’s guidelines
- Loss of use of the goods
This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.
For further technical advice, spare parts or repair service (outside of guarantee) please
contact the customer helpline number on 0845 607 6380.
Congratulations on your purchase of a quality power tool from Erbauer (UK)
Ltd. This product should give you reliable service but for your peace of mind
this
power tool does carries a 24-month guarantee, the terms of
which are detailed below.
If this product develops a fault within the guarantee period contact your
retailer.
Please retain this handbook in case you need to refer to safety, care or guarantee
information in the future.
TVC141S1-M-070924.indd 3 2007-9-25 9:45:10
SAFETY INSTRUCTIONS
Read all instructions. Failure to follow all instructions listed below
may result in serious injury. This product should never be left
unattended when connected to the mains supply.
SAVE THESE INSTRUCTIONS
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
ELECTRICAL SAFETY
Before switching the product on, make sure that the voltage of your electricity supply
is the same as that indicated on the rating plate. This product is designed to operate on
230V AC 50Hz. Connecting it to any other power source may cause damage.
IMPORTANT NOTES
• Attention: Before assembly and starting operation, read the operating instructions
carefully.
• Check that the mains voltage corresponds to the details on the type plate.
• Only connect to a proper 230 volt, 50 Hz earthed socket.
• Pull the mains plug out of the socket when: the unit is not in use, before opening the
unit, before cleaning and maintenance.
• Never clean with solvents.
• Do not use the cable to pull the plug out of the socket. When unit is ready for use, do
not leave unattended.
• Safeguard from children.
• Care must be taken that the mains connection lead is not damaged by being driven
over, crushed,stretched, etc.
• The unit must not be operated if the mains connection lead is not in perfect
condition.
• Replacement mains connection leads must not differ from the versions indicated by
the manufacturer.
• On no account vacuum: burning matches, glowing ashes and cigarette ends,
inflammable, corrosive, fire hazard or explosive substances, vapours and liquids.
• This unit is not suitable for vacuuming dust which is damaging to health.
• Store the unit in a dry place.
• Do not operate a defective unit.
• Servicing only by an authorised service point.
• Use only for operations for which the unit is intended.
• Take great care when cleaning stairs.
• Use only manufacturer’s attachments and spare parts.
TVC141S1-M-070924.indd 4 2007-9-25 9:45:11
50L WET/DRY VACUUM
SYMBOLS
Read the manual Warning Wear gloves
Wear dust mask,eye & ear protection
Conforms to relevant safety standards
TVC141S1-M-070924.indd 5 2007-9-25 9:45:11
1. SOCKET FOR POWER TOOLS
2. BLOWER HEAD
3. PUSH HANDLE
4. LATCH
5. DRAIN TUBE HOLDER
6. REAR WHEEL
7. DRAIN OUTLET
8. FRONT WHEEL
9. VACUUM HOSE
10. HOSE CONNECTION PIECE
11. FILTER BASKET ( SEE FIG 15)
12. ON/OFF SWITCH/OPERATING MODE SWITCH
13. BUTTON
14. COMBI ZOZZLE
15. DUST BAG (SEE FIG 16)
16. FOAM FILTER (SEE FIG 15)
17. CREVICE NOZZLE
18. EXTENSION TUBE
1
3
4
12
9
2
5
7
6
8
10
14
13
17
TVC141S1-M-070924.indd 6 2007-9-25 9:45:12
50L WET/DRY VACUUM
TECHNICAL DATA
Rated voltage
Rated input power
With power take-off socket
Capacity
Protection against ingress of water
Machine weight
230V~50Hz
1400W
1500W
50L
IPX4
11.9kg
ACCESSORIES
Vacuum hose 1pc
Extension tube 1pc
Combi nozzle 1pc
Crevice nozzle 1pc
Foam filter 1pc
Dust bag 1pc
Drain tube 1pc
Front wheels 2pcs
Rear wheels 2pcs
TVC141S1-M-070924.indd 7 2007-9-25 9:45:12
Note: Before using the tool, read the
instruction book carefully.
MOUNTING
1. Assemble the wheels
a. Push the front wheels into the base of the
container ensuring correct orientation. The wheels
are friction fit.
b. Unscrew the bolts on the steel bar and take off
the bar from the base. (See fig 1)
c. Simply thread the steel bar through the two
holes of the rear wheels and fix the bar back to
the body as it initially was, then tighten the bolts.
(See fig 2,3)
d. Push the wheel cover into the hole of the steel
bar. (See fig 4)
Fig 2
Fig 1
Fig 3
Fig 4
TVC141S1-M-070924.indd 8 2007-9-25 9:45:14
50L WET/DRY VACUUM
e. Screw the wheel lock-knob into the hole above
the rear wheel. Screw tightly to fix the wheel, vice
versa. (See fig 5)
f. For convenience, put the crevice nozzle into
the hole on the base of the container. (See fig 6)
2. Assemble the hose
CAUTION: This hose contains electrical
connections:
- do not use to suck up water (for vacuum
cleaners only);
- do not immerse in water for cleaning;
- the hose should be checked regularly and must
not be used if damaged.
a. Push the flexible hose into the hose connection
piece.(See Fig 7) Rotate the head of the flexible
hose. Make sure the pin on the hose is locked in
the slot.(See Fig 8)
Fig 6
Fig 5
Fig 7
Fig 8
TVC141S1-M-070924.indd 9 2007-9-25 9:45:16
b. Connect one end of the extension tube to the
vacuum hose firmly. (See Fig 9)
c. Push the combi nozzle (14) to the other end of
the extension tube. (See Fig 10)
d. Pressing the button (13) and pulling the end of
the extension tube can change the length of it.
e. Push one end of the short flexible hose into
the drain outlet firmly and the other end into the
drain tube holder. ( See Fig 11,12)
Fig 10
Fig 9
Fig 11
Fig 12
18
14
13
TVC141S1-M-070924.indd 10 2007-9-25 9:45:17
50L WET/DRY VACUUM
3. The function of the nozzle
Fig 13
TVC141S1-M-070924.indd 11 2007-9-25 9:45:18
OPERATION
Observe correct mains voltage: The voltage
of the power source must agree with the voltage
specified on the nameplate of the machine.
Equipment marked with 230 V can also be
connected to 220V.
Operation with Remote Automatic Switching
(Fig 14)
A socket outlet with earthing contact is integrated
in the vacuum cleaner. It is possible to connect
an external power tool here. (Max. input power
2000W) The vacuum cleaner is automatically
started via the connected power tool. Please
observe the maximum allowable connection
load of the connected power tool (Fig 14) Set the
operating mode switch to
I. For connecting the
power tools, various hose systems are available
as accessories.
Switching on: Switch on the power tool. The
vacuum cleaner switches on automatically after
approx. 10 seconds.
Switching off: Switch off the power tool. The
vacuum cleaner switches off automatically after
approx.20 seconds.
WET VACUUMING
Danger of explosion and fire! Do not
vacuum inflammable or explosive fluids;
for example, petrol, oil, alcohol, solvents.
Do not vacuum hot or burning dust. Do not
operate the machine in rooms where the
danger of an explosion exists.
The machine is intended for vacuuming air
and water mixtures. The machine is not to
be used as a water pump.
1. The dust bag (15) must be removed before wet
vacuuming.
2. Pull the supplied foamed plastic filter over the
filter basket for wet vacuum-cleaning. Attach the
blower head. (Fig 15)
3. Switching On and Off
To start the machine, set the On/Off switch to II
.
To switch off the machine, set the On/Off switch
to
0.
Note: When the maximum filling height is
Fig 14
Fig 15
16
11
TVC141S1-M-070924.indd 12 2007-9-25 9:45:19
50L WET/DRY VACUUM
reached, switch off the machine immediately.
Before opening and emptying, always pull the
plug from the socket outlet.
DRY VACUUMING
1. Slip the dust bag onto the socket for dry
vacuum-cleaning. The dust bag is suitable only
for dry vacuum-cleaning.
2. To insert the dust bag, slide the cardboard
frame fully onto the connection piece inside of
the container. Attach the blower head. (Fig.16)
3. Switching On and Off
To start the machine, set the On/Off switch to II
.
To switch off the machine, set the On/Off switch
to
0.
MAINTENANCE AND CLEANING
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Always keep the machine clean.
To maintain the optimum performance of
the machine, we recommended cleaning the
permanent filter after each use. For this purpose,
clean the permanent filter with a brush or rinse
with water.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. For further
information visit www.recycle-more.co.uk.
Fig 16
15
TVC141S1-M-070924.indd 13 2007-9-25 9:45:19
PLUG REPLACEMENT
If you need to replace the fitted plug then follow
the instructions below.
Important
The wires in the mains lead are coloured in
accordance with the following code:
Green & yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows. The wire which is
coloured green & yellow must be connected to
the terminal which is marked with E or .
The wire which is coloured blue must be
connected to the terminal which is marked with
N. The wire, which is coloured brown, must be
connected to the terminal, which is marked with
the letter L.
Warning: Never connect live or netutral wires
to the earth terminal of the plug. Only fit an
approved 13 Amp BS1363/A plug and the correct
rated fuse.
Note: If a moulded plug is fitted and has to be
removed take great care in disposing of the
plug and severed cable, it must be destroyed to
prevent engaging into a socket.
If the supply cord is damaged it must be replaced
by a service agent or a similarly qualified person
in order to avoid hazard.
TVC141S1-M-070924.indd 14 2007-9-25 9:45:21
50L WET/DRY VACUUM
Declaration of Conformity
We, Importer
Erbauer (UK) LTD BA22 8RT
Declare that the product
50L WET/DRY VACUUM
ERB064VAC
Complies with the following Directives,
EC Low Voltage Directive 2006/95/EC
EC Electromagnetic Compatibility Directive 2004/108/EC
2002/95/EC Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Standards and technical specifications referred to:
EN 60335-1:2002+A11:2004+A1:2004+A12:2006+A2:2006
EN 60335-2-2:2003+A1:2004+A2:2006
EN 50366:2003+A1:2006
EN 55014-1:2000+A1:2001+A2:2002
EN 55014-2:1997+A1:2001
EN 61000-3-2:2000+A2:2005
EN 61000-3-3:1995+A1:2001 +A2:2005
2007
Authorised Signatory
Date: 01/01/07
Signature:
Name: Peter Harries
Erbauer (UK) Ltd
Quality Manager
TVC141S1-M-070924.indd 15 2007-9-25 9:45:21
TVC141S1-M-070924.indd 16 2007-9-25 9:45:21
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Erbauer ERB064VAC User manual

Brand
Erbauer
Model
ERB064VAC
Category
Vacuum cleaners
Type
User manual

Erbauer ERB064VAC is a 1400 W wet dry vacuum cleaner with a 50-liter capacity. It is equipped with a power take-off socket that allows for connecting an external power tool with a maximum input power of 1500 W. The vacuum cleaner automatically starts when the connected tool is switched on, and stops with a delay of 20 seconds after the tool is switched off. When used for wet vacuuming, the maximum filling height should be observed to prevent damage to the machine.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents