ParaBody 945101 User manual

Brand
ParaBody
Model
945101
Type
User manual

This manual is also suitable for

ParaBody 945101 is a power rack that provides a stable and secure platform for various strength training exercises. It features adjustable safety bars and J-hooks for customized workout positions. The rack's robust construction with 12 gauge steel uprights and 3x2-inch end caps ensures durability and supports heavy loads. The included 1-1/2 x 2-inch glides enhance stability, while the chin-up connector allows for versatile exercises like pull-ups and chin-ups. Additionally, the plate holder weldments offer convenient storage for weight plates, optimizing your workout space.

ParaBody 945101 is a power rack that provides a stable and secure platform for various strength training exercises. It features adjustable safety bars and J-hooks for customized workout positions. The rack's robust construction with 12 gauge steel uprights and 3x2-inch end caps ensures durability and supports heavy loads. The included 1-1/2 x 2-inch glides enhance stability, while the chin-up connector allows for versatile exercises like pull-ups and chin-ups. Additionally, the plate holder weldments offer convenient storage for weight plates, optimizing your workout space.

Serious Steel
945101
POWER RACK
ASSEMBLY INSTRUCTIONS
ParaBody, Incorporated
14150 Sunfish Lake Boulevard
Ramsey, MN 55303
1-800-328-9714
Part # 6645801
Revision: 07115/96
945101 POWER RACK ASSEMBLY PARTS LIST
SORT AND COUNT ALL PARTS BEFORE BEGINNING ASSEMBLY
HARDWARE:
ITEM NAMEFDESCRIPTION QTY
2.
3.
4.
5.
6.
7.
8.
1/2 X 4 IN BOLT ............................................................................................................. 12
1/2 X 3 IN BOLT ............................................................................................................... 4
1/2 IN WASHER ............................................................................................................... 16
1/2 IN LOCK NUT ......................
: ...........................................................J ....................." ....14
3 X 2 INEND CAP ......................................................................................................... ... 8
1-1/4 IN RD END CAP ....................................................................................
~..; ..............4
1-3/4 IN RD END CAP ............
~ .........................................................................................2
I-I/2 X 2 IN GLIDE .............................................
~ ...............
~ ...........................................
12
WELDMENTS/PARTS:
ITEM NAME/BIESCRIPTION
2.
3.
4.
5.
6.
7.
UPRIGHT FRAME WELDMENT ............................ (6645003) ..................................... 2
PLATE HOLDER WELDMENT ......... .: ...................
(6644002~ ..................................... 2
SAFETY BAR WELDMENT .................................... (6645202~ .........
~ ...........................
2
BAR SUPPORT WELDMENT .................................. (6645302) ..................................... 2
CHIN-UP CONNECTOR WELDMENT ...................
(664450~ .....................................
LOWER CONNECTOR WELDMENT .................... (6644203) ...................................... 1
UPPER CONNECTOR WELDMENT ......................
(6643703) ..................................... 1
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH RULER:
I
1/2
I
1/2 [
1/2
I
1/2
I
1/2 ] 1/2
5 6
Part # 6645801
2 Revision: 07/15/96
945101 POWER RACK ASSEMBLY INSTRUCTIONS
:::::::::::::::::::::::::::::::::::::::::::::::::: ........................
" ....
:: ~::: :::::::::::::::::::::: ::i ~:!:i ~:i~i~i~i~i:!~!~ii~!~:~...!~i~:.~!~i~i:...:::!~i~i:i~!:i::.:.i~i:~i~::i:!~:i~ :!.-’.’:~::::i::::i:.::!: >.’~!~.~>.’-’.’:~.~.: ~:
1. Insert eight (8) 3 X 2 IN END CAPS into the ends of the IYPRIGI:IT FRAME WELDMENTI$ as shown
on drawing.
2. LOOSELY assemble the LOWER CONNECTOR WELDMENT and the UPPER CONNE~TOR
WELDMENT between each UPRIGHT FRAME WELDMENT as shown on drawing.
3. Insert four (4) 1-1./4 IN RD END CAPS into the ends of the TUBES on the CHIN-10P CONNECTOR
WELDMENT as shown on drawing.
4.
LOOSELY asserable the C~IN-UP CONNECTOR WELDMENT between the LrPRIGI~IT FRAME
WELDMENTS as shown on drawing.
5.
Insert two (2) 1-314 IN KID END CAPS into the ends of the PLATE I~OLDER WELDMENTS as shown
on drawing,
6. LOOSELY assemble the PLATE I:IOLDER WELDMENTS to the UPRIGHT FRAME
WELDMENTS as shown on drawing.
7.
When all compnne, nts are assembled, SECURELY tighten all bolt connections.
8.
Attach twelve (12) 1-1/2 X 2 IN GLIDES (three each) to the SAFETY BAR WELDMENTS and
SUPPORT WELDMENTS as shown in (DETAIL A).
9. Insert the BAR SUPPORT WELDMENT, and the SAFETY BAR WELDMENT into the desi.red hole
setting as shown ola drawing and in (DETAIL B).
Part # 6645801
3 Revision: 07/15/96
/
/
/
0
~
X
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

ParaBody 945101 User manual

Brand
ParaBody
Model
945101
Type
User manual
This manual is also suitable for

ParaBody 945101 is a power rack that provides a stable and secure platform for various strength training exercises. It features adjustable safety bars and J-hooks for customized workout positions. The rack's robust construction with 12 gauge steel uprights and 3x2-inch end caps ensures durability and supports heavy loads. The included 1-1/2 x 2-inch glides enhance stability, while the chin-up connector allows for versatile exercises like pull-ups and chin-ups. Additionally, the plate holder weldments offer convenient storage for weight plates, optimizing your workout space.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents