OWNER’S
MANUAL
Date of purchase: _____/ _____/ _____
Clayton 7 PC
Dining Set
Product code: D71 M80206
UPC code: 7-6945575480-6
1
Vendor Item: AS-I-138-2/6
PARTS
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
A (6)
Chair Base
B (6)
Sling Seat and Back
ACCESSORIES
Ca (12 + 1 spare)
Short Bolt
Cb (12 + 1 spare)
Long Bolt
Cc (36 + 2 spares)
Metal Washer
Ce (2)
Allen Wrench
Cf (2)
Open Hex Wrench
2
Cg (1)
Assembly
Instructions Sheet
Cd (12 + 1 spare)
Nut
ASSEMBLY INSTRUCTIONS
Place the sling seat and back (B) on the
chair base (A) and align the holes in the
arms of the base with the holes in the
sling back. For each side of hole, insert
a short bolt (Ca) through a metal
washer (Cc), through the side rail of sling
back, secure into the arm. See Fig. 1.
Don’t tighten completely.
Align the holes in the front crossbar of the
base with the holes in the sling seat.
For each hole, insert a long bolt (Cb)
(from upside), through a metal washer (Cc),
through the front crossbar of (A), through
the crossbar of the sling seat (B), through
another metal washer (Cc) and secure
with a nut (Cd). See Fig. 2. Don’t tighten
completely.
Now securely tighten all the bolts and nuts by
Allen wrench (Ce) and open hex wrench (Cf).
Repeat procedure for the remaining five chairs.
Your action chairs are now ready to use.
1
2
3
4
3
Fig. 1
Fig. 2
B
A
Ca
Cc
Cc
Cc
Cb
Cd
CARE INSTRUCTIONS
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.
Cover furniture with outdoor furniture covers when not in use.
Made in CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Call toll-free:
800-457-4652
Please refer to part numbers when reordering
/
