Novus NVB-G40DB is an aluminum wall bracket that is specifically designed for mounting NVC-GDN4810V/IR camera. To mount the camera, the user will need to remove the rear base plate of the bracket and use it as a template to mark drilling points on the surface. After drilling holes, the user can mount the base plate to the surface and then attach the bracket to the base plate. The camera can then be screwed to the bracket using three included screws and a gasket. The bracket also has a cable pass-through to allow for easy wiring of the camera.
Novus NVB-G40DB is an aluminum wall bracket that is specifically designed for mounting NVC-GDN4810V/IR camera. To mount the camera, the user will need to remove the rear base plate of the bracket and use it as a template to mark drilling points on the surface. After drilling holes, the user can mount the base plate to the surface and then attach the bracket to the base plate. The camera can then be screwed to the bracket using three included screws and a gasket. The bracket also has a cable pass-through to allow for easy wiring of the camera.
Novus NVB-G40DB is an aluminum wall bracket that is specifically designed for mounting NVC-GDN4810V/IR camera. To mount the camera, the user will need to remove the rear base plate of the bracket and use it as a template to mark drilling points on the surface. After drilling holes, the user can mount the base plate to the surface and then attach the bracket to the base plate. The camera can then be screwed to the bracket using three included screws and a gasket. The bracket also has a cable pass-through to allow for easy wiring of the camera.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI