Dymond LED-BEAT User manual

Brand: Dymond

Model: LED-BEAT

Category: Radios

Type: User manual

Page is loading ...

-2-

DECLARATION OF CONFORMITY

Hereby,

Par la présente,

Company:

Entreprise:

TE-GROUP nv

Address:

Adresse:

Kapelsestraat 61, 2950 Kapellen - BELGIUM

declare that the following equipment:

déclare que le dispositif suivant :

Product name:

Nom du produit:

DYMOND LED-BEAT

Product type:

Type de produit:

Bluetooth

Stereo Speaker

conforms with the following safety requirements of the directives 2014/30/EU,

2014/35/EU, 2014/53/EU & 2011/65/EU. Conformity is guaranteed by the

CE-symbol.

est conforme aux exigences de sécurité des directives 2014/30/EU,

2014/35/EU, 2014/53/EU & 2011/65/EU. La conformité est garantie par

le symbole CE.

This product has been tested against following standards and specica-

tions, applying versions valid on the date is was issued.

Ce produit a été testé par rapport aux normes et spécications suivantes,

appliquant les versions valables à la date de sa délivrance.

EN 60950-1 · 2006 + A11:2009 + A1:2010 + A12:2011

ETSI EN 300 328 V1.8.1

ETSI EN 301 487-1 V1.9.2 (2011-09)

ETSI EN 301 487-17 V2.2.1 (2012-09)

Joseph van Oosterum, CEO TE Group NV, April 2016

ILLUSTRATION

1110

8765

432

------------------------ LED-BEAT/11-16/V01-----------------------

-3-

HOW TO USE THE DYMOND LED-BEAT?

The LED-BEAT can be used stand-alone, using the

rechargeable battery and can be controlled using the buttons on the main unit.

The LED-BEAT is:

Bluetooth

Speaker

Music player with AUX / USB / TF input

FM-radio

Handsfree calling

PARTS & BUTTONS

1. - Short press: Search for radio stations in FM mode

- Short press: Play/Pause the music

- Short press: Answer/end call during handsfree calling

- Press 2x: Redial last number

- Long press: Turn ON/OFF LED lights

2. - Short press: Mode selection

3. - Short press: Go to previous track / FM station

- Long press: Decrease the volume

4. - Short press: Go to next track / FM station

- Long press: Increase the volume

5. Micro USB charging slot

6. ON/OFF switch

7. Micro SD/TF card input slot

8. USB input slot

9. AUX input port

10. Micro USB charging cable

11. AUX cable

12. LED indicator

CHARGING THE BATTERY

! The LED-BEAT must be fully charged before rst use!

1. Plug the micro USB cable (10) into the micro USB charging socket

(5). Plug the other end of the USB cable (10) into your computer

or USB travel charger (not included). It is recommended to charge

the speaker when it is turned OFF, to maximize battery life.

2. The red LED indicator (12) at the back of the LED-BEAT will light

up and your device will start charging. When the battery is fully

charged, the LED indicator (12) will turn off.

3. When the battery capacity is low, you will hear a beep.

The LED-BEAT battery offers up to 6 hours wireless music time. Music

time may vary from usage (volume + LED lights ON/OFF).

TURNING ON / OFF

Turning ON: Slide the ON/OFF switch (6) to ON position.

Turning OFF: Slide the ON/OFF switch (6) to OFF position.

VOLUME

Long press I<< (3) to decrease the volume. Long press >>I (4) to increase the

volume. When minimum/maximum volume is reached, you will hear a beep.

MODE SELECTION

Press M (2) to switch between Bluetooth

and FM mode.

AUX mode is only available after connecting the AUX cable (11) to the

AUX input port (9).

USB mode and TF/SD card mode are activated automatically when

inserting a USB device or SD/TF card into the corresponding slot.

BLUETOOTH

MODE

A. PAIRING

1. Bluetooth

mode is activated automatically when turning ON the

unit. You will hear “Bluetooth

mode”.

2. Let your phone search for Bluetooth

devices. Select “DYM

LEDbeat” to pair both devices. You will hear a beep. You can now

use you LED-BEAT to listen to your favorite music wirelessly.

To ensure automatic reconnection between the phone and the LED-

BEAT, we recommend setting the LED-BEAT as “Authorized” in the

Bluetooth

menu of your phone! Please refer to the manual of your

mobile phone for more detailed information.

-4-

Note: After placing the LED-BEAT in a different location, it will need to

search for available FM stations again!

USB / MICRO SD/TF CARD MODE

1. Insert a USB device or SD/TF card into the corresponding slot at

the backside of the unit (7/8). You will hear “Music Play Mode”.

2. Your music will start to play automatically.

3. Short press I<< (3) or >>I (4) for previous/next track; short press

>II (1) for play or pause.

CUSTOMER SUPPORT

For more information, technical questions and return requests concerning

this product, you should contact [email protected].

GUARANTEE

Group NV. The Dymond brand stands for superior product quality and

outstanding customer service. That is why Dymond warrants this product

against all defects in material and workmanship for a period of two (2)

years from the date of original purchase of the product. The conditions

of this guarantee and the extent of responsibility of Dymond under this

guarantee can be downloaded from the website www.dymond.nl.

If the Bluetooth

connection is not restored automatically after

disconnection, you can restore the connection manually in the menu of

your mobile phone.

B. STREAMING MUSIC

To control the music (play, pause, next track…) you can use:

• Buttons on your smartphone, tablet…

• Buttons on LED-BEAT

C. HANDSFREE CALLING

When you receive an incoming call, you will hear “AUX mode” and the

phone number that is calling you. Press >II (1) to answer a call from your

mobile phone. Press >II (1) again to end the call.

Press >II (1) 2x to redial the last dialed number.

AUX MODE

1. Insert one end of the AUX cable (11) into the AUX input port (9) at

the backside of the unit.

2. Insert the other end of the cable into an external multimedia

device such as mobile phone, MP3 player, tablet, laptop… You

will hear “AUX mode” and the music will start playing.

FM RADIO MODE

1. Go to the FM Radio mode using the M-button (2). You will hear

“FM Mode”.

2. Short press >II (1) to search for available radio stations. The unit

will search all available radio stations and save them. Each time

a radio station is found, you will briey hear the music, then the

unit continues its search for other stations. When the search is

nished, you will hear the rst saved FM station.

3. Use I<< (3) and >>I (4) to go to the previous or next station.

4. To search more radio stations or improve the signal of the radio

stations, the LED-BEAT should be connected to the AUX cable,

which will work as an antenna.

5. After turning off the speaker or choosing a different mode, and

then turning on FM mode again, the last radio station that you

listened to will be playing (all other stations are still saved).

Page is loading ...

Dymond LED-BEAT User manual

Brand: Dymond

Model: LED-BEAT

Category: Radios

Type: User manual

Download PDF

report

in other languages

français: Dymond LED-BEAT Manuel utilisateur
Deutsch: Dymond LED-BEAT Benutzerhandbuch
Nederlands: Dymond LED-BEAT Handleiding
čeština: Dymond LED-BEAT Uživatelský manuál

Dymond LED-BEAT User manual

Dymond LED-BEAT User manual

in other languages

Other documents