LG 32LH500D Owner's manual

Category
LCD TVs
Type
Owner's manual

This manual is also suitable for

*MFL69540101*
www.lg.com
P/NO : MFL69540101 (1603-00)
Printed in Vietnam
คูมือการใชงาน
เพื่อความปลอดภัยและเพื่อการอางอิง
โปรดอานคูมือการใชงานอยางละเอียดกอนการใชงานเครื่องรับโทรทัศน
และเก็บไวอางอิงสําหรับการใชงานในอนาคต
LED TV*
*
หมายเหตุ
แอลจีแอลอีดีทีวี เปนแอลซีดีที่ใชแอลอีดีแบล็คไลทเทคโนโลยี
OWNER’S MANUAL
Safety and Reference
Please read this manual carefully before operating your
set and retain it for future reference.
LED TV*
* Disclaimer
LG LED TV applies LCD screen with LED backlights.
18
ภาษาไทย
รูปแบบไฟลที่สนับสนุน
-
รูปแบบไฟลรูปภาพที่สนับสนุน
File Extension Color depth Max Resolution Min Resolution
*.jpg (Base-line) 24-bit 15360 x 8640 64 x 64
*.jpg (Progressive) 24-bit 1024 x 768 64 x 64
File Extension Bit Rate Sampling Frequency Audio Codec
*.mp3 32Kbps ~ 320Kbps 32KHz ~ 48KHz MPEG1 Layer2 / MPEG1 Layer3
*.m4a
*.aac
24Kbps ~ 384Kbps 8KHz ~ 48KHz AAC / HEAAC
*.wma
*.asf
128bps ~ 320Kbps 8KHz ~ 48KHz WMA
*Maximum 1920x1080@30p (only Motion JPEG 640x480@30p)
*H.264 BP LV 4.0 (Not support for FMO, ASO & redundant slice)
File Extension Container Video Codec
*.asf
*.wmv
ASF (Revision 01.20.03) MPEG2, MPEG4, DivX 3.11, DivX 4.12, DivX 5, DivX 6, XviD , H.264,
VC1, WMV3
*.wma Window Media Audio standard
*.avi
*.divx
AVI MPEG2, MPEG4, DivX 3.11, DivX 4, DivX 5, DivX 6, XviD , H.264, VC1,
WMV3, MJPG
HE-AAC, AAC, E-AC3, AC3, LPCM, ADPCM, MP3
*.mp4 MP4 MPEG4, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, XviD , H.264, MJPG
AAC, MP3
*.mkv MKV H.264, MPEG1, MPEG2, MPEG4, DivX 3.11, DivX 4.12, DivX 5, DivX 6,
XviD, VC1, WMV3
HE-AAC, AC3, MP3, LPCM
*.mpg
*.mpeg
PS (Program Stream) MPEG1, MPEG2
AC3, MP3
Others (*.ts) TS (Transport Stream) MPEG2, H.264
HE-AAC, AAC, E-AC3, AC3, MP3
File Extension Subtitle Parser Remarks
.srt SubRip
.ssa/ .ass SubStation Alpha
.smi SAMI
.sub SubViewr
MicroDVD
DVDSubtitleSystem
SubIdx (VobSub)
SubViewer 1.0 & 2.0 only
.txt TMPlayer
-
รูปแบบไฟลเสียงที่สนับสนุน
-
รูปแบบไฟลวิดีโอที่สนับสนุน
-
รูปแบบคําบรรยายที่สนับสนุน
2
ENGLISH
Safety instructions
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and/or remote control in the following
environments:
•  A location exposed to direct sunlight
•  An area with high humidity such as a bathroom
•  Near any heat source such as stoves and other devices that produce
heat
•  Near kitchen counters or humidiers where they can easily be
exposed to steam or oil
•  An area exposed to rain or wind
•  Near containers of water such as vases
Otherwise, this may result in re, electric shock, malfunction or product
deformation.
Do not place the product where it might be exposed to dust. This may
cause a re hazard.
Mains Plug is the TV connecting/disconnecting device to AC mains
electric supply. This plug must remain readily attached and operable
when TV is in use.
Do not touch the power plug with wet hands. Additionally, if the cord
pin is wet or covered with dust, dry the power plug completely or wipe
dust o. You may be electrocuted due to excess moisture.
Make sure to connect Mains cable to compliant AC mains socket with
Grounded earth pin. (Except for devices which are not grounded on
earth.) Otherwise possibility you may be electrocuted or injured.
Insert power cable plug completely into wall socket otherwise if not
secured completely into socket, re ignition may break out.
Ensure the power cord does not come into contact with hot objects such
as a heater. This may cause a re or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in re or electric shock.
Bend antenna cable between inside and outside building to prevent
rain from owing in. This may cause water damaged inside the Product
and could give an electric shock.
When mounting TV onto wall make sure to neatly install and isolate
cabling from rear of TV as to not create possibility of electric shock /
re hazard.
Do not plug too many electrical devices into a single multiple electrical
outlet. Otherwise, this may result in re due to over-heating.
Do not drop the product or let it fall over when connecting external
devices. Otherwise, this may result in injury or damage to the product.
ENGLISH
3
Desiccant
Keep the anti-moisture packing material or vinyl packing out of the
reach of children. Anti-moisture material is harmful if swallowed. If
swallowed by mistake, force the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can cause suocation. Keep it out
of the reach of children.
Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to ensure that a small child does not
consume them. Please seek Doctor- Medical Attention immediately if
child consumes batteries.
Do not insert any metal objects/conductors (like a metal chopstick/
cutlery/screwdriver) between power cable plug and input Wall Socket
while it is connected to the input terminal on the wall. Additionally,
do not touch the power cable right after plugging into the wall input
terminal. You may be electrocuted. (Depending on model)
Do not put or store inammable substances near the product. There is a
danger of combustion/explosion or re due to careless handling of the
inammable substances.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire
into the product, or inammable objects such as paper and matches.
Children must pay particular attention. Electrical shock, re or injury
can occur. If a foreign object is dropped into the product, unplug the
power cord and contact the service centre.
Do not spray water on the product or scrub with an inammable
substance (thinner or benzene). Fire or electric shock accident can occur.
Do not allow any impact, shock or any objects to fall into the unit,
and do not drop anything onto the screen. You may be injured or the
product can be damaged.
Never touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the
windows and ventilate. It may cause a re or a burn by a spark.
Do not disassemble, repair or modify the product at your own
discretion. Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
If any of the following occur, unplug the product immediately and
contact your local service centre.
•  The product has been impacted by shock
•  The product has been damaged
•  Foreign objects have entered the product
•  The product produced smoke or a strange smell
This may result in re or electric shock.
Unplug the TV from AC mains wall socket if you do not intend to use the
TV for a long period of time. Accumulated dust can cause re hazard
and insulation deterioration can cause electric leakage/shock/re.
4
ENGLISH
Apparatus shall not be exposed to dripping or splashing and no objects
lled with liquids, such as vases, shall be placed on the apparatus.
Do not install this product on a wall if it could be exposed to oil or oil
mist. This may damage the product and cause it to fall.
If water enters or comes into contact with TV, AC adapter or power
cord please disconnect the power cord and contact service centre
immediately. Otherwise, this may result in electric shock or re.
Only use an authorized AC adapter and power cord approved by
LG Electronics. Otherwise, this may result in re, electric shock,
malfunction or product deformation.
Never Disassemble the AC adapter or power cord. This may result in re
or electric shock.
Be careful in handling the adapter to prevent any external shocks to it.
An external shock may cause damage to the adapter.
CAUTION
Install the product where no radio wave occurs.
There should be enough distance between an outside antenna and
power lines to keep the former from touching the latter even when the
antenna falls. This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined
surfaces. Also avoid places where there is vibration or where the
product cannot be fully supported. Otherwise, the product may fall or
ip over, which may cause injury or damage to the product.
If you install the TV on a stand, you need to take actions to prevent the
product from overturning. Otherwise, the product may fall over, which
may cause injury.
If you intend to mount the product to a wall, attach VESA standard
mounting interface (optional parts) to the back of the product. When
you install the set to use the wall mounting bracket (optional parts), x
it carefully so as not to drop.
Only use the attachments / accessories specied by the manufacturer.
When installing the antenna, consult with a qualied service
technician. If not installed by a qualied technician, this may create a
re hazard or an electric shock hazard.
We recommend that you maintain a distance of at least 2 to 7 times
the diagonal screen size when watching TV. If you watch TV for a long
period of time, this may cause blurred vision.
Only use the specied type of battery. This could cause damage to the
remote control.
Do not mix new batteries with old batteries. This may cause the
batteries to overheat and leak.
ENGLISH
5
Batteries should not be exposed to excessive heat. For example, keep
away from direct Sunlight , open replace and electric heaters.
Do not place non-rechargeable batteries in charging device.
Make sure there are no objects between the remote control and its
sensor.
Signal from Remote Control can be interrupted due to external/internal
lighting eg Sunlight, uorescent lighting. If this occurs turn o lighting
or darken viewing area.
When connecting external devices such as video game consoles, make
sure the connecting cables are long enough. Otherwise, the product
may fall over, which may cause injury or damage the product.
Do not turn the product On/O by plugging-in or unplugging the power
plug to the wall outlet. (Do not use the power plug for switch.) It may
cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product
from overheating.
•  The distance between the product and the wall should be more
than 10cm.
•  Do not install the product in a place with no ventilation (e.g., on a
bookshelf or in a cupboard).
•  Do not install the product on a carpet or cushion.
•  Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in re.
Take care not to touch the ventilation openings when watching the TV
for long periods as the ventilation openings may become hot. This does
not aect the operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part
by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet. This may cause
a re hazard.
Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the cord
exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such
as nail, pencil or pen, or make a scratch on it, as it may causedamage
to screen.
Avoid touching the screen or holding your nger(s) against it for long
periods of time. Doing so may produce some temporary or permanent
distortion/damage to screen.
When cleaning the product and its components, unplug the power
rst and wipe it with a soft cloth. Applying excessive force may cause
scratches or discolouration. Do not spray with water or wipe with a wet
cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax,
benzene, alcohol etc., which can damage the product and its panel.
Otherwise, this may result in re, electric shock or product damage
(deformation, corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not
6
ENGLISH
disconnected from the AC power source even if you turn o this unit
by SWITCH.
When unplugging the cable, grab the plug and unplug it, by pulling
at the plug.
Don’t pull at the cord to unplug the power cord from the power board,
as this could be hazardous.
When moving the product, make sure you turn the power o rst. Then,
unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a re
hazard or cause electric shock.
When moving or unpacking the product, work in pairs because the
product is heavy. Otherwise, this may result in injury.
Contact the service centre once a year to clean the internal parts of the
product.
Accumulated dust can cause mechanical failure.
Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
If the product feels cold to the touch, there may be a small “icker”
when it is turned on. This is normal, there is nothing wrong with
product.
The panel is a high technology display product with resolution of two
million to six million pixels. You may see tiny black dots and/or brightly
coloured dots (red, blue or green) at a size of 1ppm on the panel. This
does not indicate a malfunction and does not aect the performance
and reliability of the product.
This phenomenon also occurs in third-party products and is not subject
to exchange or refund.
You may nd dierent brightness and color of the panel depending on
your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not
related with the product performance, and it is not malfunction.
Displaying a still image for a prolonged time may cause image sticking.
Avoid displaying a xed image on the TV screen for a long period of
time.
Generated sound
“Cracking noise: A cracking noise that occurs when watching or turning
o the TV is generated by plastic thermal contraction due to tempera-
ture and humidity. This noise is common for products where thermal
deformation is required. Electrical circuit humming/panel buzzing:
A low level noise is generated from a high-speed switching circuit,
which supplies a large amount of current to operate a product. It varies
depending on the product.
This generated sound does not aect the performance and reliability
of the product.
Do not use high voltage electrical goods near the TV (e.g. electric
mosquito-swatter). This may result in product malfunction.
WARNING!
Never place a television set in an unstable location. A television set may
fall, causing serious personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple precautions such as:
•  Using cabinets or stands recommended by the manufacturer of the
television set.
•  Only using furniture that can safely support the television set.
•  Ensuring the television set is not overhanging the edge of the
supporting furniture.
•  Not placing the television set on tall furniture (for example,
ENGLISH
7
cupboards or bookcases) without anchoring both the furniture and
the television set to a suitable support.
•  Not placing the television set on cloth or other materials that may
be located between the television set and supporting furniture.
•  Educating children about the dangers of climbing on furniture to
reach the television set or its controls.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refer to “ON” (power).
Refers to dangerous voltage.
Preparing
NOTE
•  Image shown may dier from your TV.
•  Your TV’s OSD (On Screen Display) may dier slightly from that
shown in this manual.
•  The available menus and options may dier from the input source
or product model that you are using.
•  New features may be added to this TV in the future.
•  The TV can be placed in standby mode in order to reduce the power
consumption. And the TV should be turned o if it will not be
watched for some time, as this will reduce energy consumption.
•  The energy consumed during use can be signicantly reduced
if the level of brightness of the picture is reduced, and this will
reduce the overall running cost.
•  The items supplied with your product may vary depending on the
model.
•  Product specications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
•  For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not t into your TV’s USB port.
A
B
A
B
*A
<
=
10 mm
*B
<
=
18 mm
•  Use a certied cable with the HDMI logo attached.
•  If you do not use a certied HDMI cable, the screen may not display
or a connection error may occur. (Recommended HDMI cable types)
- High-Speed HDMI®/ cable (3 m or less)
- High-Speed HDMI®/ cable with Ethernet (3 m or less)
CAUTION
•  Do not use any unapproved items to ensure the safety and product
life span.
•  Any damage or injuries caused by using unapproved items are not
covered by the manufacturer’s warranty.
•  Some models have a thin lm attached on to the screen and this
must not be removed.
•  When attaching the stand to the TV set, place the screen facing
down on a cushioned table or at surface to protect the screen
from scratches.
•  Make sure that the screws are inserted correctly and fastened
securely. (If they are not fastened securely enough, the TV may tilt
forward after being installed.) Do not use too much force and over
tighten the screws; otherwise screw may be damaged and not
tighten correctly.
Antenna isolator installation guide
(Depending on model)
Use this to install TV in a place where there is a voltage dierence
between TV Set and GND of antenna signal.
•  If there is a voltage dierence between TV Set and GND of antenna
signal, the antenna contact might be heated and excessive heat
might cause an accident.
You can improve the safety when watching TV by eciently removing
power voltage from TV antenna. It is recommended to mount the
isolator to the wall. If it cannot be mounted to the wall, mount it on the
TV. Avoid disconnecting the antenna Isolator after installation. Before
starting, be sure that the TV antenna is connected.
ANTENNA/
CABLE IN
Cable / Antenna
Wall
Isolator
or
Connect one end of the isolator to cable/antenna jack and the other to
TV set or set-top box.
“Equipment connected to the protective earthing of the building
installation through the mains connection or through other equipment
with a connection to protective earthing - and to a cable distribution
system using coaxial cable, may in some circumstances create a re
hazard. Connection to a cable distribution system has therefore to be
8
ENGLISH
provided through a device providing electrical isolation below a certain
frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can
occur.
Maintenance
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the
product lifespan.
•  Make sure to turn the power o and disconnect the power cord and
all other cables rst.
•  When the TV is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent possible
damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in
clean water or a diluted mild detergent. Then wipe immediately with
a dry cloth.
•  Avoid touching the screen at all times, as this may result in damage
to the screen.
•  Do not push, rub, or hit the screen surface with your ngernail or a
sharp object, as this may result in scratches and image distortions.
•  Do not use any chemicals as this may damage the product.
•  Do not spray liquid onto the surface. If water enters the TV, it may
result in re, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
Lifting and moving the TV
Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.
•  It is recommended to move the TV in the box or packing material
that the TV originally came in.
•  Before moving or lifting the TV, disconnect the power cord and
all cables.
•  When holding the TV, the screen should face away from you to
avoid damage.
•  Hold the top and bottom of the TV frame rmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
•  When transporting a large TV, there should be at least 2 people.
•  When transporting the TV by hand, hold the TV as shown in the
following illustration.
•  When transporting the TV, do not expose the TV to jolts or
excessive vibration.
•  When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
•  Do not apply excessive pressure to cause exing /bending of frame
chassis as it may damage screen.
•  When handling the TV, be careful not to damage the protruding
joystick button.
CAUTION
•  Avoid touching the screen at all times, as this may result in damage
to the screen.
•  Do not move the TV by holding the cable holders, as the cable
holders may break, and injuries and damage to the TV may occur.
ENGLISH
9
Turning the TV on or o
IN
Mounting on a table
(Image shown may dier from your TV.)
1 Lift and tilt the TV into its upright position on a table.
•  Leave a 10 cm (minimum) space from the wall for proper
ventilation.
10 cm
10 cm
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
•  Do not place the TV near or on sources of heat, as this may result in
re or other damage.
WARNING
If a television is not positioned in a suciently stable location, it can
be potentially hazardous due to falling. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
•  Using cabinets or stands recommended by the manufacturer of
the television.
•  Only using furniture that can safely support the television.
•  Ensuring the television is not overhanging the edge of the
supporting furniture.
•  Not placing the television on tall furniture (for example, cupboards
or bookcases) without anchoring both the furniture and the
television to a suitable support.
•  Not standing the televisions on cloth or other materials placed
between the television and supporting furniture.
•  Educating children about the dangers of climbing on furniture to
reach the television or its controls.
10
ENGLISH
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the
back of the TV.
•  If there are bolts inserted at the eye-bolts position, remove the
bolts rst.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear
of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the at surface.
CAUTION
•  Make sure that children do not climb on or hang on the TV.
NOTE
•  Use a platform or cabinet that is strong and large enough to
support the TV securely.
•  Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.
Mounting on a wall
Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the oor. When you attach the TV to other building materials, please
contact qualied personnel. LG recommends that wall mounting be
performed by a qualied professional installer. We recommend the use
of LG’s wall mount bracket. LG Branded wall mount is easy to move with
cables connected. When you do not use LGs wall mount bracket, please
use a wall mount bracket where the device is adequately secured to the
wall with enough space to allow connectivity to external devices. It is
advised to connect all the cables before installing xed wall mounts.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
Separate purchase (Wall mounting bracket)
Model 32LH500D 43LH500T
VESA (mm) (A x B) 100 x 100 200 x 200
Standard screw M4 M6
Number of screws 4 4
Wall mount bracket LSW140B
LSW240B
MSW240
A
B
CAUTION
•  Disconnect the power rst, and then move or install the TV.
Otherwise electric shock may occur.
•  Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.
•  If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury. Use an authorised LG wall mount and
contact the local dealer or qualied personnel.
•  Do not over tighten the screws as this may cause damage to the TV
and void your warranty.
•  Use the screws and wall mounts that meet the VESA standard. Any
ENGLISH
11
damages or injuries by misuse or using an improper accessory are
not covered by the manufacturer’s warranty.
NOTE
•  Use the screws that are listed on the VESA standard screw
specications.
•  The wall mount kit includes an installation manual and necessary
parts.
•  The wall mount bracket is not provided. You can obtain additional
accessories from your local dealer.
•  The length of screws may dier depending on the wall mount.
Make sure to use the proper length.
•  For more information, refer to the manual supplied with the wall
mount.
•  When installing the wall mounting bracket, use the adhesive
label provided. The adhesive label will protect the opening from
accumulating dust and dirt. (Only when the label is provided)
Provided item
Adhesive label
Connections (notications)
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external devices
connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
NOTE
•  The external device connection may dier from the model.
•  Connect external devices to the TV regardless of the order of the
TV port.
•  If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information of recording, refer to the manual
provided with the connected device.
•  Refer to the external equipment’s manual for operating
instructions.
•  If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
•  Use a signal splitter to use more than 2 TVs.
•  If the image quality is poor, install a signal amplier properly to
improve the image quality.
•  If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
•  An antenna cable and converter are not supplied.
Adapter connection
(Depending on model)
CAUTION
•  Please be sure to connect the TV to the AC-DC power adapter
before connecting the TV’s power plug to a wall power outlet.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
12
ENGLISH
Remote control
(Depending on model)
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the
and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
CAUTION
•  Do not mix old and new batteries, as this may damage the remote
control.
•  In Analogue TV and some countries, some remote control buttons
may not work.
•  The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control sensor
on the TV.
A
INDEX
A
(POWER) Turns the TV on or o.
TV/RAD
Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
RATIO Resizes an image.
AV MODE
Selectcs an AV mode.
INPUT Changes the input source.
Number buttons Enters numbers.
LIST
Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
B
INDEX
C
1
B
Adjusts the volume level.
FAV Accesses your favourite programme.
GUIDE Shows programme guide.
MUTE
Mutes all sounds.
Scrolls through the saved programmes.
Moves to the previous or next screen.
C
TELETEXT buttons( TEXT, T.OPT)
These buttons are used for
teletext.
TIME TELETEXT time.
SETTINGS Accesses the main menus.
Q.MENU Accesses the Quick menus.
Navigation buttons (up/down/left/right) Scrolls through
menus or options.
OK
Selects menus or options and conrms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and returns to TV viewing.
AD/
By Pressing AD button, audio descriptions function will be
enabled.
INDEX
Select each index page.
Control buttons (
) Controls the MULTIMEDIA
menus and USB.
1
Coloured buttons These access special functions in some
menus.
( : Red, : Green, : Yellow, : Blue)
ENGLISH
13
Licenses
Supported licenses may dier by model. For more information about
licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
The terms HDMI and HDMI High-Denition Multimedia Interface,
and the HDMI logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
This DivX Certied® device has passed rigorous testing to ensure it
plays DivX® video.
To play purchased DivX movies, rst register your device at vod.divx.
com. Find your registration code in the DivX VOD section of your
device setup menu.
DivX Certied® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certied® and associated logos are trademarks of DivX,
LLC and are used under license.
Covered by DivX Patents 7,295,673; 7,460,668; 7,515,710;
8,656,183; 8,731,369; RE45,052; and others available at [www.divx.
com/patents]
Watching TV
Turning the TV on for the rst time
When you turn the TV on for the rst time, the Initial setting screen
appears. Select a language and customize the basic settings.
1 Connect the power cord to a power outlet. The Power indicator turns
red and the TV switches to Standby mode.
2 In Standby mode, press the power button on the remote control or
local key to turn the TV on. The Initial setting screen appears if you
turn the TV on for the rst time.
NOTE
•  You can also access Factory Reset by accessing OPTION in the
main menu.
3 Follow the on-screen instructions to customize your TV settings
according to your preferences.
Language
Selects a language to display.
Country
Selects a country.
Mode Setting
Selects Home Mode for the
home environment.
Time Zone
Sets the time zone.
Auto Tuning
Scans and saves available
programmes automatically.
NOTE
•  To display images in the best quality for your home environment,
select Home Mode.
•  Store Mode is suitable for the retail environment.
•  If you select Store Mode, any customized settings will switch back
to the default settings of Store Mode in 5 minutes.
4 When the basic settings are complete, press the OK .
NOTE
•  If you do not complete the Initial setting, it will appear whenever
the TV turns on.
•  Disconnect the power cord from the power outlet when you do not
use the TV for a long period of time.
5 To turn the TV o, press the power button on the remote control.
Watching TV
1 In Standby mode, press (POWER) to turn the TV on.
2 Press INPUT and select TV.
14
ENGLISH
3 To turn the TV o, press (POWER). The TV switches to Standby
mode.
Managing programmes
Automatically setting up programme
Use this to automatically nd and store all available programmes.
1 Press SETTINGS and the Navigation buttons to scroll to SETUP and
press OK .
2 Press the Navigation buttons to scroll to Auto Tuning and press
OK
.
3 Press the Navigation buttons to scroll to Start and select Start to
begin auto tuning. The TV scans and saves available programmes
automatically.
4 When you return to the previous menu, press BACK.
Manually setting up programme
Manual Tuning lets you manually tune and arrange the stations in
whatever order you desire.
TV settings
1 Press SETTINGS and the Navigation buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to Manual Tuning.
3 Press the Navigation buttons(Left and Right) to select TV.
4 Press the Navigation buttons to scroll to Storage.
5 Press the Navigation buttons or Number buttons to select the desired
programme number.
6 Press the Navigation buttons to scroll to System.
7 Press the Navigation buttons to scroll to Band.
8 Press the Navigation buttons to scroll to V/UHF or Cable.
9 Press the Navigation buttons to scroll to Programme.
10 Press the Navigation buttons and then select the desired Channel
number with the Navigation buttons or Number buttons.
11 Press the Navigation buttons to scroll to Search.
12 Press the Navigation buttons to scroll and start Searching.
13 Press the OK to store it.
14 When you return to the previous menu, press BACK.
NOTE
•  To store another programme, repeat steps 3 to 13.
-
Assigning a station name
You can assign a station name with ve characters to each programme
number.
1 Press SETTINGS and the Navigation buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to Manual Tuning.
3 Press the Navigation buttons to scroll to Name.
4 Press the Navigation buttons to scroll to select the position and
make your choice of the second character, and so on. You can use the
alphabet A to Z, the number 0 to 9, +/ -, and blank and press OK .
5 Press the OK to store it.
6 When you return to the previous menu, press BACK.
DTV settings
When selecting DTV input signal in Manual Tuning, you can view the
on-screen signal strength monitor to see the quality of the signal being
received.
1 Press SETTINGS and the Navigation buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to Manual Tuning.
3 Press the Navigation buttons(Left and Right) to select DTV.
4 Press the Navigation buttons to scroll to select channel number you
want to adjust.
5 Press the Navigation buttons to adjust Frequency(kHz) and
Bandwidth(MHz).
6 Press the Navigation buttons to scroll to Add.
7 Press the OK to store it.
8 When you return to the previous menu, press BACK.
Selecting a programme on the programme
list
1 Press LIST to access the programme list.
2 Press the Navigation buttons to select to desired programme and
press OK .
3 When you return to the previous menu, press LIST.
NOTE
•  You may nd some blue programmes. They have been set up to be
skipped by auto programming or in the programme edit mode.
•  Some programmes with the programme number shown in the
programme list indicate there is no station name assigned.
Using additional options
Adjusting aspect ratio
Resize an image to view at its optimal size by pressing Q.MENU or
accessing Aspect Ratio in the PICTURE menu.
NOTE
•  The available ratio varies depending on the input source.
-
16:9 : Resizes images to fit the screen width.
ENGLISH
15
-
Just Scan : Displays video images in the original size without
removing parts of the edge of the image. (This function works
in DTV/Component/HDMI (720p / 1080i / 1080p) Mode.)
NOTE
•  If you select Just Scan, you may see image noises at the edge of
the original signal.
-
Original : When your TV receives a wide screen signal it will
automatically change to the picture format broadcasted.
(4:3 4:3) (16:9 16:9)
-
Full Wide : When TV receives the wide screen signal, it will
let you adjust the picture horizontally or vertically, in a linear
proportion, to fill the entire screen fully. 4:3 and 14:9 video is
supported in full screen without any video distortion through
DTV input.
-
4:3 : Resizes images to the previous standard 4:3.
-
14:9 : You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is viewed in the
same way as in 4:3, but is moved to the up and down.
-
Zoom : Formats an image to fit the screen width. The top and
bottom of the image may not appear.
NOTE
•  If you enlarge or reduce an image, the image may be distorted.
Changing AV modes
Each AV MODE has optimized image and sound settings.
Press AV MODE repeatedly to select an appropriate mode.
Mode Description
Off
Changes to the previously customized settings.
Cinema
Uses the optimized image and sound settings for a
cinematic look.
Game
Uses the optimized image and sound settings for fast
gaming.
When playing a video game using PlayStation or Xbox.
it is recommended to use the Game mode.
When in Game mode, functions related to picture
quality will be optimized for playing games.
Using the input list
Selecting an input source
1 Press INPUT to access the input sources.
•  The device displays on each input source.
2 Press the Navigation buttons or input button to scroll to one of the
input sources and press OK .
Move OK
Input List
TV
Component HDMI 1AVUSB
HDMI 2
Input Label
Exit
Input source Description
TV Watch TV over the air and cable broadcast.
USB
Connect USB storage devices (USB memory)
to the TV and use multimedia features.
AV
Watch video from a VCR or other external
devices.
Component
Select it when using the DVD or the Digital
set-top box depends on connector.
16
ENGLISH
HDMI 1/HDMI 2
Watch video from a HTS or other high
denition devices.
MULTIMEDIA
Connecting USB storage devices
Connect USB storage devices (USB memory) to the TV and use
multimedia features (See “Browsing les on page 17).
Connect a USB ash memory or USB memory card reader to the TV as
shown on the following illustration.
USB IN
To disconnect a USB storage device, make sure to end the connection
properly to prevent damages to the TV or les.
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to Eject and press OK .
3 Disconnect the USB storage device only when the message says that
it is safe to remove.
CAUTION
•  Do not turn the TV o or remove a USB storage device while the
USB storage device is connected to the TV, as this could result in
loss of les or damage to the USB storage device.
•  Back up your les saved on a USB storage device frequently, as you
may lose or damage the les and this may be not covered by the
manufacturer’s warranty.
Tips for using USB storage devices
•  Only a USB storage device is recognizable.
•  If the USB storage device is connected through a USB hub, the
device is not recognizable.
•  A USB storage device using an automatic recognition programme
may not be recognized.
•  A USB storage device which uses its own driver may not be
recognized.
•  The recognition speed of a USB storage device may depend on
each device.
•  Please do not turn o the TV or unplug the USB device when
the connected USB storage device is working. When such device
is suddenly separated or unplugged, the stored les or the USB
storage device may be damaged.
•  Please do not connect the USB storage device which was articially
manoeuvred on the PC. The device may cause the product to
malfunction or fail to be played. Never forget to use only a USB
storage device which has normal music les, image les or movie
les.
•  Please use only a USB storage device which was formatted as a
FAT16, FAT32, NTFS le system.
•  Please connect a USB storage device with the cable oered by the
device maker.
•  Some USB storage devices may not be supported or operated
smoothly.
•  Be sure to back up important les since data stored in a USB
memory device may be damaged. We will not be responsible for
any data loss.
•  If a USB memory device is connected to a USB multi-card reader, its
volume data may not be detected.
•  If the USB memory device does not work properly, disconnect and
reconnect it.
•  How fast a USB memory device is detected diers from device to
device.
•  The recommended capacity is 1 TB or less for a USB external hard
disk and 32 GB or less for USB memory.
•  Any device with more than the recommended capacity may not
work properly.
•  USB storage devices below USB 2.0 are supported as well. But they
may not work properly in the movie list.
•  Maximum of 999 folders or les can be recognized under one
folder.
•  If there are a lot of folders or les all within one folder, the device
may not be able to access these properly.
•  For external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 0.5A.
ENGLISH
17
Browsing les
Access the photo, music, or movie lists and browse les.
1 Connect a USB storage device.
2 Press SETTINGS to access the main menus.
3 Press the Navigation buttons to scroll to MULTIMEDIA and press
OK .
4 Press Navigation buttons to scroll to Photo, Music or Movie and
press OK .
5 When you return to the previous menu, press BACK.
USB
Back
MovieMusicPhoto
Back
KY101 KY102 KY103KY104Exit
KY105 KY106 KY107KY108
Photo
1
2
43
5
6
Page 1 / 1
No. Description
1
Press Navigation buttons to scroll to Photo, Music or
Movie.
2
Displays Photo, Music or Movie in the selected folder.
3
Displays the folder name of the le in the selected folder.
4
Current page/Total pages.
5
Contents under the folder.
6
Available buttons on the remote control.
18
ENGLISH
Supported file format
-
Photo Support Formats
File Extension Color depth Max Resolution Min Resolution
*.jpg (Base-line) 24-bit 15360 x 8640 64 x 64
*.jpg (Progressive) 24-bit 1024 x 768 64 x 64
-
Audio Support Formats
File Extension Bit Rate Sampling Frequency Audio Codec
*.mp3 32Kbps ~ 320Kbps 32KHz ~ 48KHz MPEG1 Layer2 / MPEG1 Layer3
*.m4a
*.aac
24Kbps ~ 384Kbps 8KHz ~ 48KHz AAC / HEAAC
*.wma 128bps ~ 320Kbps 8KHz ~ 48KHz WMA
-
Video Support Formats
*Maximum 1920x1080@30p (only Motion JPEG 640x480@30p)
*H.264 BP LV 4.0 (Not support for FMO, ASO & redundant slice)
File Extension Container Video Codec
*.asf
*.wmv
ASF (Revision 01.20.03) MPEG2, MPEG4, DivX 3.11, DivX 4.12, DivX 5, DivX 6, XviD , H.264,
VC1, WMV3
*.wma Window Media Audio standard
*.avi
*.divx
AVI MPEG2, MPEG4, DivX 3.11, DivX 4, DivX 5, DivX 6, XviD , H.264, VC1,
WMV3, MJPG
HE-AAC, AAC, E-AC3, AC3, LPCM, ADPCM, MP3
*.mp4 MP4 MPEG4, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, XviD , H.264, MJPG
AAC, MP3
*.mkv MKV H.264, MPEG1, MPEG2, MPEG4, DivX 3.11, DivX 4.12, DivX 5, DivX 6,
XviD, VC1, WMV3
HE-AAC, AC3, MP3, LPCM
*.mpg
*.mpeg
PS (Program Stream) MPEG1, MPEG2
AC3, MP3
Others (*.ts) TS (Transport Stream) MPEG2, H.264
HE-AAC, AAC, E-AC3, AC3, MP3
-
Subtitle Support Formats
File Extension Subtitle Parser Remarks
.srt SubRip
.ssa/ .ass SubStation Alpha
.smi SAMI
.sub SubViewr
MicroDVD
DVDSubtitleSystem
SubIdx (VobSub)
SubViewer 1.0 & 2.0 only
.txt TMPlayer
ENGLISH
19
Viewing photos
View image les saved in a USB storage device. The displays on the
screen may dier from the model.
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to MULTIMEDIA and press
OK
.
3 Press the Navigation buttons to scroll to Photo and press
OK .
4 Press the Navigation buttons to scroll to a folder/le you want and
press OK
.
5 View photos by using the following menus buttons.
Back
Up FolderExit
1 / 1
Photo
DriveA
JMJ002 JMJ003 JMJ004
JMJ007 JMJ008 JMJ009JMJ005 JMJ006
Button Description
Navigation
button
Scrolls through the les.
OK
Views the highlighted le or enters the mark
mode.
Moves to the previous or next page.
6 The following options are available while viewing photos.
90
Option Description
Press play key to play the le
Press pause key to pause the le
Press Navigation button(Left) to go to the
previous le
Press Navigation button(Right) to go to the
next le
Press stop key to stop the le
Press Q.MENU to set a slideshow and show
information of photo
Press RATIO to adjust: Zoom 1/4, Zoom 1/2,
Zoom 1, Zoom 2, Zoom 4, Zoom 8.
90
Press Coloured button(Red) to stop playing and
rotate 90 degrees clockwise
7 Press BACK to return to the previous menu or press EXIT to
return to main menu.
Q.MENU options for Photo
1 Press Q.MENU.
A pop-up window will appears.
2 Press the Navigation buttons to scroll to one of the following options
and press OK .
Option Description
Repeat Selects On and Off to repeat the slideshow.
Shuffle Selects On and Off to shue the slideshow.
Speed
Selects a slideshow speed (4 sec., 6 sec.,
8 sec.).
Transition
Selects the transition eect (None, Fade to
Black, Vertical Wipe, Horizontal Wipe
and Random ) for switching the photo
during the slideshow.
Listening to music
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to MULTIMEDIA and press
OK
.
3 Press the Navigation buttons to scroll to Music and press
OK .
4 Press the Navigation buttons to scroll to a folder/le you want and
press OK .
5 Play music by using the following menus/buttons.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70

LG 32LH500D Owner's manual

Category
LCD TVs
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI