Sunstech Tab 87 DCBT User guide

Page is loading ...

Attention:

This handbook contains important security measures and the correct use of

the product information, in order to avoid accidents. Pls make sure to reading

the manual carefully before use the device.

1. Please don’t be in high temperature, moisture or very dust place

2. Please don’t be in high temperature, Especially in summer don't put the

device in the car when Windows closed.

 Avoid fall or Violent collision of the device, don’t make the TFT display

screen were violent tremor, This could cause TFT display screen abnormal

or damage.

 Please choose the appropriate volume, Use headphones shoulds not be

too big volume, If feel tinnitus, Lower the volume or stop using it

 please charge In the following condition,

4 The battery power ICONS shows have no power

5 The system automatically shut off, startup after power off soon

6 Operation buttons no response

7 The machine that the top right corner show red icons

1. When the device in the format or ongoing upload and download

file, please don't suddenly disconnect, This could cause application

error.

1. For those who because of damage to the product, repair, or other causes

of erased the memory, The company shall not be liable for any

responsibility, please follow the user manual for the standardized

operation to use the device.

2. Don’t disassemble the product, don’t use alcohol、Thinner or benzene to

scrubbing products

3. Don't use the device one of the place of prohibit to use electronic

equipment in regional (such as the plane)

4. Please don't using the Tablet PC when you in driving or walking down

the street,

5. USB just only be used for data transmission

1

Tablet Part

Name function

1 Rear Camera 2M pixel rear camera

2 Power and lock Key Hold and press to turn on or turn off the

unit,Briefly press to turn on or turn off the screen.

3 Earphone Jack To connect your earphone

4 MINI HDMI Connect to TV output Via a HDMI cable

5 Micro USB Connect to a computer via a USB cable to

transfer data (music,videos,photo,ect.),USB

OTG,supports mouse, Keyboard, USB flash

disk,etc,with a converting cable.

6 Power jack(DC in –

Put)

Connect to a 5V output adaptor as included in

the accessories

7 ESC key Press the “ESC” to go back

8 TF card slot To insert your TF card

9 Microphone Microphone

10 Reset Press to reset the tablet if it freezes or behaves

abnormal

11 Speaker Speaker

2

Specifications

Display: 8 inch 1024X768 (4:3) Capacitive multi-touch screen

CPU: A20 Dual-Core A7 1.2GHZ

RAM: 1GB DDR III

GPU Mali-400@450Mhz

Internal Storage: 8 GB

Expansion Memory: Micro SD card up to 32GB (not supplied)

Built-In Wireless: 802.11b/g/n

BLUETOOTH

Micro USB 2.0 / OTG

TV Port: mini HDMI 1,.4

Front camera 0,3 Mpixels

Rear camera 2Mpixels

Battery : 4500mAh

AC Adapter: DC 5V-2A

Operating System: Android 4.2.2 “Jelly Bean”

Made in China

What’s Inside The box

Tablet – 1pc

Power Adapter -1pc

USB Cable-1pc

OTG Cable-1pc

Instruction manual - 1pc

Warranty card 1pc

3

Getting Started

Battery Charging

The tablet has a built-in rechargeable Li-polymer battery.

2. To charge the unit, connect the AC power adapter to the micro USB jack

on the right side of the tablet.

3. The battery icon shows the battery status and charging status

4. The tablet can be used even if the battery is being charged.

the above icons indicate the different level of electricity left in the battery

5. No replacement of battery without authorization.

6. Recharge it for at least half hour if it has been idle for long time and fails

to start itself.

7. Regularly recharge it at least once a month.

8. Between 5°—40° is the optimum temperature for recharging battery or

the battery performance might slightly deteriorate.

4

Disposal

The battery might contain the polluting material, please give it to the official

recycling-station before disposal of the tablet pc, and do not litter.

Power ON/OFF

ON:

press the

button for continuous 5 seconds until the tablet turns “ON”.

OFF:

1.Press

the button for continuous 5 seconds and it will appear

2.Click Power off to power off the tablet

Screen Lock

This feature locks the screen, at the same time turn OFF the screen’s backlight

after a few seconds.

Screen locks when:

1. System is idle.

2. Manually activate it by pressing the Power button once.

Screen unlock :

Home screen

The Home screen will look similar to the picture below. It is actually five

screens, each of which can have a different layout of icons. To switch between

screens, simply slide your finger left or right across the display.

The status bar and navigation buttons are always visible, no matter which

Home screen you can currently viewing.

5

The Desktop contains shortcuts to your most-used applications and widgets

Touch the screen icon to quickly search the World Wide Web using Google.

The

icon will launch the Application menu.

The status bar displays system information, such as current time and battery.

Touch to Expand the status bar for more detailed information.

The

button moves back one step to the previous menu/page.

The

buttons returns immediately to the Android desktop.

The

button display a menu of recently opened applications.

The

button to screenshot current interface

6

The button decrease the volume.

The

button increase the volume,

Settings Menu

The settings menu allows you to adjust Tablet system configuration.

To change settings:

1. Touch the "Settings" menu icon on the Application menu.The

Settings menu will open.

2. Guide your finger up or down the left side of the screen to scroll through

the list of available categories.

3. Touch a category title to view further options on the right side of the

screen.

Wi-Fi - Connect to /disconnect from wireless networks, view connection status

Bluetooth: To connect or disconnect from devices to send photos / music…

Data usage - Enable / disable mobile data, view current usage, set mobile data

limit (note: this function is available only on devices supplied with 3G card)

Sound - Change volume, touch sound, screen lock sounds etc

Display - Change brightness, wallpaper, sleep settings, font size etc

Storage - Manage NAND and Micro SD card, view available capacity etc

Battery - See battery status and powered-on time

Apps - Manage applications, running services etc

Accounts & sync - Switch synchronization on /off, manage accounts etc

Location services - Change approximate location detection, improve search

results

Security - Change screen lock type, encryption, password, credential storage

etc

Language & input Select language, add to the dictionary, edit on-screen

keyboard settings, vocal search, etc

7

Backup & reset - Backup & restore data, perform factory reset, etc

Date & time - Set date, time zone, time, clock format etc

Accessibility - Set up large text, auto-rotate screen, speak password etc

Developer options - Advanced functions for Android developers - debugging,

HDCP check etc

About tablet - Information about your Android device

How to Use TF card

1. Insert the TF card into the TF card slot. Gently push TF card into slot until it

clicks into place.

2. A prompt will be seen on the screen saying “ Preparing SD card “

Removing TF card

1. Close all applications and documents which have been opened from the

TF card.

2. Select “Setting” and find “ Storage” then click “Unmount SD card”.

3. A prompt will be seen on the screen saying “ SD card safe to remove”

4. Gently press the TF card to remove and pull out the TF card.

Note: Insert the TF card in correct position, otherwise it will damage the card

and the slot.

Software Keyboard

The tablet has a software keyboard which automatically show up when

you tap the place on screen where text or number are to be entered.

Touch Screen

The touch screen responds to finger touch.

Note:Do not place any object on the touch screen because it may damage or

crush the screen.

8

Single Click: single click one icon to choose the icon or option you want.

Long Press: press and hold one icon to make appear a menu related to the

executed function (if available).

Drag: drag on the screen and you can move between magic cube sides or

drag the application icons into the shortcut bar.

How to connect with computer

Note: Turn on your Tablet before connect the Tablet to PC by USB cable.

1. Use USB cable to connect MID with computer. System will notice USB

connected on bottom of screen.

2. Press USB connected to pop up, then click Turn on USB storage, click OK.

3. Then the USB connection has been successfully.

9

Connection to Internet

Wireless:

1. Select “ Settings”

2. Select “Wi-Fi” and slide OFF to ON status.

3. All detected wireless networks in the area will be listed, Click to select

desired wireless connection.

4. Enter WEP key or network key if necessary.

5. Once connected to a wireless network, settings will be saved

6. Wireless icon will appear on the taskbar when connected successfully.

Note: when the tablet detects the same wireless network in the future, the

device will connect automatically to the network

Web Browsing

Connect to the internet and launch the browser.

10

Connection to Bluetooth

1- Select “Settings”

2- Select “Bluetooth” and slide OFF to ON status.

3-All detected Bluetooth device in the area will be listed, tap to select the

device

connection.

4- When your select the device must enter code and permission key if

necessary to pairing.

5-On the other device must accept the permissions to connect between

them.

6- Now, your can sent photos / Music…

11

Camera

Touch the icon to enter camera mode and the interface is shown as

follows:

1.Touch the icon

in the middle to take photo

2. Touch the icon

and you can switch camera mode to camera recording

mode.

3. Touch the icon

to change of the front to the back camera.

12

Trouble Shooting

Close Application

All running applications take up system memory and will slow down the

systems response. Please shut down all idle applications to free memory and

get the system speed back to normal.

To close the application, click the icon

on the shortcut bar to

enter the system configuration interface. Select the Application → Running

services and the interface is shown as follows:

Tap the application you want to close. A pop-up window will be displayed.

Tap “Stop” to close that application.

13

Mandatory Power off

1. Press and hold the power button for 5 seconds and the device will be

powered off.

2. Press the reset button on the back and the device will be forced to be

powered off.

Restore Default Setting

If you want to reset the factory setting and erase all materials, please press

Settings → Backup & Reset → Factory data reset.

** Warning: A factory data reset will delete your data, configuration of the

system and applications that you have installed.

**Please use this function carefully.

-Recovery mode Function. TAB 87DCBT

How to enter in recovery mode.

Please follow these steps.

To enter in the recovery mode first you should power off the device,

Then long-press the “ON-OFF” key and “Return” Key at the same time

until the Recovery mode has appeared, pls try it.

After a new menu will appear and then you must use the touch

panel to select “Wipe data/ factory reset” then press “Power” and

then select “Yes delete all user data”

Then press “power” again. The unit will then begin the recovery

mode.(this process may last for a few minutes).

14

When it finishes select “reboot system now” press the “power

button” and the unit will re-start itself. (this process may last for a

few minutes

__________________________________________________

-How to download the software using the unit.

IMPORTANT: When you download the software, all data will be

deleted as photos, videos and Apps that you have been

installed.

Do not interrupt this process please make sure the battery is fully

charged.

Please, follow these steps.

1- Open browser and search and open this link:

www.sunstech.es/download/

2- Select the model of the tablet that you have and download the

software.(This software is installed In the INTERNAL SD).

3- When it finished the download, select the App " update " in your

unit.

4-Select "Local Update", "download".

5-Select the software / Download and wait until the process is

finished.

15

Warranty conditions

- The warranty of this product is for 2 years since the purchase date.

- The warranty will exclude breakdowns caused by bad use of the product,

wrong installation or installation in not desirable places for a proper

maintenance of the product, rips, updates of the products that are not the

supplied by the brand, pieces wore away for its use or for not domestic or

inappropriate use. Also are excluded breakdowns caused for manipulations of

the products by people or companies alien to our company.

- For any request regarding the warranty terms, the purchase receipt must be

attached.

Correct disposal of this Product

(Waste Electrical & Electronic Equipment(WEEE)

Your product is designed and manufactured with

high quality materials and

components which can be recycled and reused.

This symbol means that electrical and electronic

equipment, at their endof-life should be disposed of

separately from your household waste.

Please dispose of this equipment at your local

community waste collection/recycling centre.

In the European Union there are separate collection

systems for used electrical and electronic products.Please help us to conserve

the environment we live in!

1. DO NOT place objects on top of the

device, as objects may scratch the

device.

2. DO NOT expose the device to dirty

or

dusty environments.

3. DO NOT place the device on an

uneven

or unstable surface.

4. DO NOT insert any foreign objects

into the device.

5. DO NOT expose the device to strong

magnetic or electrical field.

6. DO NOT expose the device to direct

sunlight as it can damage the device. Keep it away from

heat sources.

7. DO NOT store your device in

temperatures higher than 40°C(104°F).

The internal operating temperature for

this device is from 20°C(68°F) to

60°C(140°F).

8. DO NOT use the device in the rain.

9. Please check with your Local

Authority or retailer for proper

disposal of electronic products.

10. The device and adaptor may

product some heat during normal

operation of charging. To prevent

discomfort or injury from heat exposure, DO NOT leave

the device on your lap.

11. POWER INPUT RATING:

Refer to the rating label on the

device and be sure that the

power adaptor complies with

the rating. Only use accessories specified by the

manufacturer.

12. Clean the device with a soft cloth.

If needed, dampen the cloth slightly

before cleaning. Never use abrasives or cleaning

solutions.

13. Always power off the device to install

or remove external devices that do not

support hot-plug.

14. Disconnect the device from an

electrical outlet and power off before cleaning the

device.

15. DO NOT disassemble the device.

Only a certified service technician

should perform repair.

16. The device has apertures to

disperse heat. DO NOT block the

device ventilation, the device may

become hot and malfunction as a

result.

17. Risk of explosion if battery

replaced by an incorrect type. Dispose

of used batteries according to the

instruction.

Page is loading ...

Sunstech Tab 87 DCBT User guide

Sunstech Tab 87 DCBT User guide

in other languages

Related papers

Other documents