Contours ZY011 Product Instruction

ContoursBaby.com

AIP006-R2 07/18

2 ContoursBaby.com

Your child’s safety depends on you. Proper infant car seat

adapter use cannot be assured unless you follow these

instructions. DO NOT USE THE INFANT CAR SEAT ADAPTER UNTIL

YOU READ AND UNDERSTAND THESE INSTRUCTIONS.

IMPORTANT SAFETY INFORMATION:

• NEVER leave child unattended.

• For double strollers, always place the car seat in the front

adapter before placing another in the back adapter.

When removing children, always remove the child’s car seat

in the back adapter rst before removing the child’s in the

front. Failure to do so may cause the stroller to become

unstable and tip.

• When using this product, to avoid serious injury from falling

or sliding out, infant must always be secured in the infant car

seat with the car seat harness. Refer to infant car seat

instructions for proper adjustment.

• Make sure the stroller is fully unfolded and the car

seat adapter is securely latched before attaching your

infant car seat. This prevents nger pinching and injuries

caused by stroller collapsing.

How to Use this adapter with your infant car seat

• To ensure your infant car seat is properly installed on the

stroller, make sure it is:

- Facing the person pushing the stroller.

- Tightly secured to the stroller.

• Only transport infants that are within the size and

weight limitations of your infant car seat, as described

in the instruction manual provided by the infant car

seat manufacturer.

mWARNING

888.226.4469 3

• This adapter is compatible with Contours Bliss and the following

infant car seats:

• This adapter is compatible with Contours Options (model ZT017)

and the following infant car seats:

• This adapter is compatible with Contours Options (model ZT019)

and the following infant car seats:

• This adapter is compatible with Contours Options Elite (model

ZT015) and the following infant car seats:

• This adapter is compatible with Contours Options Elite (model

ZT018) and the following infant car seats:

• This adapter is compatible with Contours Curve and the following

infant car seats:

Maxi-Cosi

®

, Nuna

®

, and Cybex

®

are trademarks of their respective owners. They are not

associated with Kolcraft Enterprises, Inc. and no approval by them is to be implied.

-Maxi-Cosi

®

Mico

®

AP

-Maxi-Cosi

®

Mico

®

Nxt

-Maxi-Cosi

®

Mico

®

Prezi

-Nuna Pipa

™

-Maxi-Cosi

®

Mico

®

AP

-Maxi-Cosi

®

Mico

®

Nxt

-Maxi-Cosi

®

Mico

®

Prezi

-Nuna Pipa

™

-Nuna Pipa

™

Lite

-Nuna Pipa

™

-Maxi-Cosi

®

Mico

®

AP

-Maxi-Cosi

®

Mico

®

Prezi

-Maxi-Cosi

®

Mico

®

30

-Maxi-Cosi

®

Mico

®

Max 30

-Nuna Pipa

™

-Nuna Pipa

™

Lite

-Cybex® Aton Q - Platinum

-Cybex® Aton 2 - Gold

-Cybex® Aton - Silver

-Cybex® Cloud Q

-Maxi-Cosi

®

Mico

®

Prezi

-Nuna Pipa

™

-Nuna Pipa

™

Lite

-Cybex® Aton Q - Platinum

-Cybex® Aton 2 - Gold

-Cybex® Cloud Q

-Maxi-Cosi

®

Mico

®

AP

-Maxi-Cosi

®

Mico

®

Prezi

-Maxi-Cosi

®

Mico

®

30

-Maxi-Cosi

®

Mico

®

Max 30

-Nuna Pipa

™

-Nuna Pipa

™

Lite

-Cybex® Aton Q - Platinum

-Cybex® Aton 2 - Gold

-Cybex® Aton - Silver

-Maxi-Cosi

®

Mico

®

AP

-Maxi-Cosi

®

Mico

®

Nxt

-Maxi-Cosi

®

Mico

®

Prezi

4 ContoursBaby.com

To Attach Infant Car Seat Adapters

1 Find the adapter marked “L”.

Align “L” adapter over Left frame hub as shown.

It is the left side as you are standing behind stroller.

NOTE: The adapters won't t properly if placed on the wrong

side.

2

Push “L” adapter down onto the left frame hub until the

button on the hub engages with the adapter. Pull up on the

“L” adapter to ensure it is securely attached.

3

Repeat Steps 1 and 2 for “R” adapter.

NOTE: To remove adapter, push button on frame hub in, then

lift the adapter up.

L

R

1 2 3

888.226.4469 5

To Secure Infant Car Seats

If using on a double stroller, keep car seat handle up to avoid

interfering with other child.

1 Lock foot brake to keep stroller from rolling.

2 With one hand, grasp the infant car seat handle (in its

upright, carrying position). With your other hand, grasp

infant car seat near baby’s feet. Gently position the infant

car seat above infant car seat adapters so the baby faces the

stroller handle.

3 Lower the infant car seat receptors onto the adapters.

Push down rmly. Pull up on car seat to ensure

it is

securely attached on both sides.

NOTE: If you are using this adapter on a tandem stroller, in

combination with our universal adapter (included with most

tandems), always put the universal adapter in the mount

position closest to the handle to avoid any interference

between the car seats.

2

3

6 ContoursBaby.com

To Remove Car Seats With Side Release

Levers

1 Grip the sides of the car seat and engage the levers /

buttons on each side of child seating area.

2 Carefully lift the car seat o the adapters.

NOTE: Do not try and remove the adapters and car seat

together.

888.226.4469 7

Care & Maintenance

To Remove Car Seats With Rear Release

Handles

1 Squeeze release handle on rear of car seat and then lift o

of adapters using carry handle.

• Clean with a damp cloth and wipe dry.

• When storing stroller with the infant car seat adapters

attached, never stack other items on top of or in it; this may

damage the adapters.

Page is loading ...

20 ContoursBaby.com

Please direct any comments, questions or replacement

part requests to:

Contours

®

Consumer Service Department

1100 W Monroe St

Chicago, IL 60607

1-888-226-4469 in U.S. & Canada, 1-312-361-6493 outside U.S.

& Canada Central Standard Time, 8 am-5 pm Monday - Thursday,

8 am - 3 pm Friday

e-mail: customerservice@contoursbaby.com

Favor de remitir cualquier comentario, preguntas o

pedidos de piezas de respuesto a:

Contours

®

Consumer Service Department

1100 W Monroe St

Chicago, IL 60607

1-888-226-4469 en los Estados Unidos y en Canada,

1-312-361-6493 fuera de los Estados Unidos y Canada tiempo

central del este, 8 am-5 pm Lunes - Jueves, 8 am - 3 pm Viernes

correo electrónico: customerservice@contoursbaby.com

Prière d’envoyer vos commentaires, questions ou

demandes d’échange de pièce à:

Contours

®

Consumer Service Department

1100 W Monroe St

Chicago, IL 60607

1-888-226-4469 aux États-Unis et au Canada, 1-312-361-6493 à

l’extérieur des États-Unis et du Canada.

Heure de Chicago, de 8h00 à 17h00 du lundi au jeudi, 8h00 à

15h00 vendredi

courriel: customerservice@contoursbaby.com

Contours ZY011 Product Instruction

Contours ZY011 Product Instruction

in other languages

Related papers

Other documents