GMR5088-2CKHS, GMR5095-2CKHS
GMR5098-2CKVP
CHARGING CRADLE
1
2
3
4
5
6
7
10
11
12
13
14
17
19
22
23
24
LIQUID CRYSTAL DISPLAY
9
8
15
16
18
20 21
Radio color/pattern varies
according to model number.
*Range may vary depending on environmental
and/or topographical conditions.
• 15GMRS/7FRSChannels
• 7WeatherChannels
• 142PrivacyCodes(CTCSS
ToneandDCSCode)
• Upto50MileRange*
• InternalVOXCircuitry
• TRUWaterproof™(JIS7)—
SubmersibleandFloats
• DirectCallwithNameDisplay
• 143GroupCodes
• SilentMode
• 10SelectableCall/RingTone
Alerts
• BacklitLCDDisplay
• RogerBeep
• CallAlert;Vibrate
• 2EarbudswithVOXMicor2
HeadsetBoomMics
1 Antenna 13 Weather
2 PushtoTalk 14 Enter/Lock
3 Boost 15 BatteryLevel
4 Monitor 16 GroupNumber
5 ChannelUp/Down 17 GroupIndicator
6 Tone 18 RX(Receive)orTX
(Transmit)Indicator
7 DCall 19 VOXIndicator
8 Microphone 20 MissedCallIndicator
9 Speaker 21 AlertIndicator
10 Flashlight/Monitor 22 ChannelNumber
11 Menu/Power 23 Chargingcontacts
12 VolumeUp/Down 24 ChargingLEDs
CongratulationsonyourpurchaseofaUniden
GMRS(GeneralMobileRadioService)
waterproofradio.Theselightweight,palm-sized,
radiosarestate-of-the-artdevices.The
GMR5088-2CKHSandGMR5095-2CKHS
modelsincludeearbudvoxmics.GMR5098-
2CKVPincludestwoVOXheadsetboommics.
Usethematsportingeventstocontactfamily
andfriends,whilehiking,skiing,oroutdoors,or
inaneighborhoodwatchforvitalcommunication
—evenoutsidebythepool!Don'tworry;they
float!
Your radio complies with JIS7 water-
resistant standards, which means the radio
can be submerged in 1.0 meters of water for
30 minutes without damage.
• Theradiowillonlymeetthisratingiffully
assembledandallrubbersealsandthejack
coverarewellmaintainedandcorrectlyfitted.
ThismeansthattheHeadsetplugisnotinserted,
andtheHeadsetjackcoverandthebatterypack
areattachedandsecurelyfastened.
• Afteryourradioissubmergedinwater,youmight
noticethatthesoundisdistorted.Thisisbecause
waterremainsinandaroundthespeakerand
microphone.Justshaketheradiotoclearexcess
water,andthesoundshouldreturntonormal.
Note: If your radio is exposed to salt water,
clean your radio thoroughly with fresh water
and dry it before turning it on.
PACKAGE CONTENTS
Yourpackagecontainstworadios,6
rechargeableAANiMHbatteries,oneACadapter
withmicroUSBconnector,onechargingcradle,2
earbud/micheadsetsforGMR5095-2CKHSand
GMR5088-2CKHS(GMR5098-2CKVPhastwo
headsetboommics),twobeltclips,andthis
referenceguide.Toorderthefollowingoptional
accessories,visitourwebsiteatwww.uniden.
com.Use only Uniden accessories.
• NiMHBatteries–#BP-38
• ChargingCradle–#RC-1289
• HeadsetBoomMic–#ZA-133orZA-160
• ACAdapter–#AD-0001
• CarabinerClip–#TSTD0720002
GMRS LICENSE
The radio operates on the General Mobile
Radio Service (GMRS) frequencies when
using Channels 1-7 and channels 15-22. You
must have a GMRS license issued by the
Federal Communications Commission to
legally use these channels.
For licensing information and application
forms, visit the FCC online at: www.fcc.gov/
wtb/uls or call the FCC hotline at 1-800-418-
3676. If you have any questions, you can
contact the FCC direct at 1-888-225-5322. No
license is required for operation on channels
8-14 or operation on any channel in Canada.
INSTALL THE BATTERY
Eachradiouses3rechargeableAANiMH
batteriesforpower(included).Itcanalsouse
non-rechargeableAAalkalinebatteries(not
included).ToinstalltheNiMHbatteries:
1.Turnthescrewholdingthebattery
compartmentcounterclockwisewitha
screwdriverandliftupthebatterycover,
2.InserttheNiMHbatteriesinthebattery
compartmentaccordingtothedirections
indicatedonthebattery.Installingthe
batteriesincorrectlywillpreventtheunitfrom
operating.
3.Beforeplacingthebatterycoverbackonthe
radio,checktherubbersealaroundthe
batterycompartment.Makesurethattheseal
isingoodconditionandthatthereisno
foreignmatterunderit.
4.Replacethebatterycompartmentdoor.
Tightenthescrewssecurely.
Note:If the rubber seal appears worn, nicked,
or dried out, replacement seals are available
from www.uniden.com.
CHARGING THE RADIO
Followtheseinstructionstochargeorrecharge
yourradios.
Make sure to turn the radio OFF before
placing it in the charging cradle.
1.Inserttheadapter'smicroUSBplugtoDCIN
5VUSBjackofthechargingcradleandplug
theotherendintoanACoutlet.
2.Setthechargingcradleonastabledeskor
tabletopandplacetheradiosinthecharging
cradlewiththekeypadfacingforward.
3.MakesurethattheLEDilluminates.Charge
thebatteriesfor16hoursandremovethe
radiofromthechargingcradleaftercharging.
Note:
• UseonlythesuppliedbatteriesandACadapter
orapprovedaccessoriesfromUniden.
• Chargetimemayvarydependingonthebattery
liferemaining.
• Thebatteriesmustbeinstalledfortheunitto
operate,eveniftheunitisalsoconnectedto
externalpower.
• Ifbatterypowerislow,youcannotoperatethe
radioevenusingexternalpower.Allowthe
batteriestochargebeforeusing.Ifyoutryto
transmitwhilepowerislow,theradiowill
automaticallyturnoff.
• Chargetimemayvarydependingonthebattery
speaktosomeone,bothyourradiosmustbeset
tothesamechannelandPrivacycode.
Tochooseachannel:
PressCH or ,thenpressCH or
toincreaseordecreasethechannel
numberdisplayed.
Toscrollthroughthechannels,pressCH or
,thenpressandholdCH or formore
than1second.
Note: Channels 1-7 and 15-22 have a typical
range of up to 50 miles by pressing BOOST.
HI displays when you select a GMRS
channel, and LO displays when you select
an FRS channel.
SETTING UP GROUP MODE
Groupmodeletsseveralpeopletalkonthe
samechannelinaseparategroup.Inorderto
useGroupmode,youneedtoinitializespecific
settingsinyourradio:
• SettheradiotoGroupmode.
• SetaGroupCode.
• SetaUnitNumber.
• Seta"Nickname."
Setting the Radio to Group Mode
TosettheradiotoGroupmode,whichenables
DirectCall,AutoChannelChange,andAllCall,
pressandholdTONE/GROUPfor2seconds.
TheradiodisplaysGRP andgroupcode.
Note: In Group mode, you cannot receive
transmissions from other radios unless
they are also set to the same channel and
group code.
Setting the Group Code
Setthegroupcodeforyourradiogroupfrom
0-142.Everyoneinyourgroupmustselectthe
samegroupcodeinordertocommunicatewith
eachother.
1.PressTONE/GROUPinGroupmode.Press
CH or toselectthegroupnumber.
2.PressENTER/ orTONE/GROUPtoreturn
tonormaloperation.
Setting the Unit Number
Eachradioinyourgroupneedstobesettoa
uniqueunitnumber,from1-16.
1.PressMENU/ .Advancethroughthemenu
untilUNITappears,andthenpressENTER/
.Thecurrentunitnumberflashes.
2.PressCH or toselectthedesiredunit
number.
3.PressENTER/ tocontinuetothenext
section.
Setting Your Nickname
Yournicknameappearsonotherunits’displays
whenyoumakeanAllCallorDirectCall.Thisis
alsothenamethatappearsonotherradio
displayswhensomeonewantstomakeaDirect
Calltoyou.Withoutanickname,theunit
numbershows.
1.PressMENU/ .Advancethroughthemenu
untilUNITappears,andthenpressENTER/
.Thecurrentunitnumberflashes,then
pressENTER/ .Theradiodisplays
- - - -
(oryourcurrentnickname)withthefirstplace
inthenicknameflashing.
2.PressCH or toselecttheletter,then
ENTER/ toadvancetothenextletteruntil
youhaveenteredyournickname.
3.PressMENU/ toconfirmthesettingand
exitthemenu.
Using Group Mode
Groupmodeletsyoumakedirectcallstoother
peopleinyourgroupwithoutalertingtheentire
groupandalsoletsyouquicklychange
everyoneinyourgrouptoanotherchannelfrom
asingleradio.BeforeusingGroupmode,follow
theinstructionsin"SettingUpGroupmode"on
everyradioinyourgroup.Then,torecordthe
unitIDandeveryone’snicknameineveryradio,
sendacallto"All"fromeachradioonetime
(see"SendingaDirectCall").
Sending a Direct Call
DirectCallletsyoucalleveryoneinyourgroup
atonce,orcallasinglepersoninyourgroup
withoutanyoneelseinthegroupknowing.Itis
likea"speeddial"directlytotheperson(s)you
wanttotalkto.
Tocalleveryoneinyourgroup,pressD CALLin
Groupmode.TheradioflashesALL.Then,
pressD CALL or ENTER/ .Everyoneinyour
groupreceivesacall"chirp"forabout3
seconds.Whenthechirpends,beginyour
conversation.
Note:When you make a direct call to "all," your
radio also sends out your nickname or ID so
that it will show up in the call list for everyone in
your group.
Tocallonepersoninyourgroupwithouthaving
otherpeopleknow,pressD CALLinGroup
mode.Then,useCH or toselectthe
personyouwanttocallandpressD CALL or
ENTER/ .Yourradiosoundstonesfor3
secondsasitsendsthecall.Whentheselected
personanswers,youcanbeginyour
conversation.
Youcansilencethecalltonesanytimeby
pressingPTTorBOOST.
Yourconversationremainsprivatebetweenyou
andthepersonyoucalleduntil15secondsafter
Channel Scan Feature
Yourradiohasachannelscanfeaturethatlets
youeasilyscanall22channels.Whenanactive
channelisdetected,theradiopausesonthat
channeluntilthechannelisclear.Thenaftera
2-seconddelay,theradioresumesscanning.
PressingPTTorBOOSTwhilethescanis
pausedonachannelletsyoutransmitonthat
channel.
Toturnonchannelscan:
PressMENU/ .TheradiodisplaysSCAN.
PressENTER/ .Thechannelnumberchanges
astheradiorapidlycyclesthroughthechannels.
UsetheradioinStandard(notGroup)mode
whenyouneedtobeabletocommunicatewith
radiosthatdonothavethegroupfeature.
Talking on Your Radio
Totalktoothersusingtheradio:
1.PressandholdPTTorBOOSTandspeakin
aclear,normalvoiceabout2-3inchesaway
fromthemicrophone.Whileyoutransmit,
TXHIorTXLOappearsonthedisplay
accordingtothetypeofchannel.Toavoid
cuttingoffthefirstpartofyourtransmission,
pauseslightlyafterpressingPTTorBOOST
beforeyoustarttalking.
2.Whenyoufinishspeaking,releasePTTor
BOOST.Youcannowreceiveincomingcalls.
Whilereceiving,RXappearsonthedisplay.
Note:
• When you press BOOST, BOOST appear on
the display. The radio transmits at maximum
power when a GMRS channel is selected.
• IfBOOST,PTTorVOXiscontinuouslyused,1
minuteafteryoustartusingthefeaturethe
transmissionstopsandyouhearatimeouterror
tone.
Monitor Mode Feature
Yourradioletsyoulistenforweaksignalson
thecurrentchannelatthepressofakey.
ToturnontheMonitormode:
• PressandholdLIGHT/MONfor2secondsuntil
twobeepssoundforcontinuouslistening.The
receivercircuitstaysopen,soyouhearboththe
noiseandweaksignals.
ToturnoffMonitormode:
PressLIGHT/MONtoreturntotheprevious
mode.MONandRXdisappear.
Navigating through the Normal Menu
YourradiohasaMenufunctiontoaccess
advancedfeatures.InordertouseAuto
ChannelChange,youneedtosetyourradioto
Groupmode.
Start
Scanning
Scan
Mode
Silent
Mode
ON-OFF
Auto
Channel
Change
Channel
Change
VOX
Level
OFF, 1-5
1-10
Call
Tone
Unit
Setting
Setting
Unit
Number
Roger
Beep
ON-OFF
Beep
Tone
ON-OFF
Setting
Nickname
1.Toenterthemenu,pressMENU/ .
2.PressMENU/ againtoadvancethrough
themenu.Afterthelastmenuitem,theradio
exitstothepreviousmode.
3.OtherwaystoexittheMenufunctionare:
a.PressPTT,BOOST,LIGHT/MON, D
CALL, WX/ALERT or TONE/GROUP.
b.Wait10secondsuntiltheradio
automaticallyreturnstotheprevious
mode.
Setting Silent Mode
WhenyouturnonSilentmode,allincoming
callsaremuted,thedisplaybacklightflashes,
andthechannelindicatordisplaysSLNTand
CALLtoalertyoutoanincomingcall.Ifyoudo
notrespondtothecallwithin15seconds,the
backlightturnsoff.TheGMR5095willalso
vibratetoremindyouthatyoumissedacall.
Silentmodeisdisabledfor15secondswhen
youtransmit,receive,orpressanyotherbutton.
TosetSilentmode:
1.Enterthemenu.Advancethroughthemenu
untiltheSLNTdisplays,thenpressENTER/
.Thecurrentsettingflashes.
2. Press
CH
todisplayon,thenpressENTER/
Note: To prevent unwanted silent alerts, be sure
to use a Privacy Code or Group Code whenever
you use the Silent mode feature.
You can hear the received voice when you turn
on channel scan and an active channel is
detected, even during Silent mode.
Missed Call Alerts
IfyoureceiveanincomingcallwhileSilent
modeisonanddonotrespond,theradiowill
turnontheMissedCallicon.Ifyouareusing
Groupmode,theradiowillalsoindicatewho
madethecall.
TheGMR5095willalsoremindyouofamissed
callbyvibratingeveryminuteafterthecallfor3
minutes.
• BOOSTforMaximum
Range*
• HeadsetJack
• AutoChannelChange
Call
• BatteryLevelMeter
• RechargeableNiMH
Batteries
• DualChargingCradle
withACAdapter
• ChannelMonitor
• ChannelScan
GroupScan
• KeypadLock
• EmergencyWeather
Alert
• EmergencyLight
yourlastconversation.Then,yourradio
automaticallyexitsPrivatemode.
Automatically Changing Channels
AutoChannelChangeletsyoueasilycoordinate
achannelchangeforeveryoneinyourgroup.
Youmightwanttodothiswhenyoufindyouare
gettingalotofinterferenceonyourcurrent
channel.Youalsousethisfeaturetochange
fromalow-powerchannel(8-14)tooneofthe
high-poweredchannels(1-7,15-22)formore
range(ortoalow-powerchannelifyouneed
longerbatterylife).
Tostartanautochannelchange,onanyradio
inthegroup,pressMENU/ . Advancethrough
themenuuntilCHCX appears,thenpress
ENTER/ . Thecurrentchannelflashes.Use
CH or to selectthetargetchannel.You
cancheckwhethertheselectedchannelis
clear.ThenpressD CALLorENTER/ .
Yourradiochirpsforabout10secondswhileit
sendsoutthechannelchangesignal.Aseach
radioreceivesthechannelchangesignal,it
chirpsonce,thenchangestothenewchannel.
Toensureallradiosmakeittothenewchannel,
werecommendyou:
• Makesureyouareinanopenenvironment,
wheretheradiowillgetthebestrange.
• Optimizerangeduringthechannelchangesignal
byraisingtheradiooveryourheadtogivethe
bestpossibleheight.
• Doa"rollcall"onthenewchannelafterthe
movetobesurenoonewasleftbehind.Ifyou
missedsomeone,returntothepreviouschannel
andissuethesignalagain.
USING THE RADIO IN
STANDARD MODE
UsetheradioinStandard(notGroup)mode
whenyouneedtobeabletocommunicatewith
radiosthatdonothavethegroupfeature.
Choosing a Privacy Code
YoucanselectaPrivacyCodefrom1-142for
eachchannel.oF(off)indicatesnoPrivacy
Codeselectedandyourradiocanreceivea
signalregardlessofthecodesettingsofthe
transmittingradio.
1.PressTONE/GROUP.ThePrivacyCode
indicatorflashes.
2.PressCH or toincreaseordecrease
thecode.YoucanalsoselectoF.
3.PressENTER/ orTONE/GROUP toreturn
tonormaloperation.
Note: Only tones 1-38 are standard across
radio brands. Other settings might differ
from brand to brand. See the specifications
for the specific tones used for each setting.
Voice Operated Transmission
Yourradioisequippedwithauserselectable
VoiceOperatedTransmitter(VOX)thatcanbe
usedforautomaticvoicetransmissions.TheVOX
featureisdesignedtobeusedwithaheadsetwith
amicrophone.Initiatetransmissionbyspeaking
intotheremotemicrophoneinsteadofpushing
PTTandBOOST.ToselecttheVOXlevel:
1.PressMENU/ .AdvancethroughtheMenu
untilVOXappearsonthedisplay, thenpress
ENTER/ . The currentlevel(off,1-5) flashes.
LeveloF(off)disablesVOX,whilelevels1-5
setthesensitivityoftheVOXcircuit.
2.PresseitherCH or toreachthedesired
VOXsensitivitylevel,thenpressENTER/ .
Uselevel1forincreasedsensitivitytovoicein
normallyquietenvironments,anduseahigher
leveltoreduceundesiredactivationinvery
noisyenvironments.
Transmitting a Call Tone
Yourradioisequippedwith10selectablecall
tonesthataretransmittedwhenyoupressD
CALLinStandardmode.
Theselectedtonealsowillbeheardwhen
someoneplacesadirectcalltoyou.
Toselectacalltone:
1.PressMENU/ .Advancethroughthemenu
untilCALLappears,thenpressENTER/ .The
currentcalltonenumber(1-10)flashes.
2.PressCH or toincreaseordecreasethe
numbertothedesiredcalltone.Eachtonewill
beheardthroughthespeaker.PressENTER/
toselectacalltone.
Totransmittheselectedcalltone,pressD CALL.
Theselectedtoneistransmittedforafixedlength
oftime.PressPTTorBOOSTtocancel.
Roger Beep
RogerBeepisabeepthatissenttonotifytheend
oftransmission(bothPTTandVOXtransmission).
YoucanhearRogerBeepthroughthespeaker
whenbothRogerBeepandBeepToneareon.
WhenRogerBeepisonandBeepToneisoff,you
donothearRogerBeep,butitistransmittedto
yourparty.
ToadjustRogerBeep,pressMENU/ .Advance
throughthemenuuntilRGRappears,thenpress
ENTER/ .Thecurrentsettingflashes.
ToturnoffRogerBeep:
PressCH todisplayoF,thenpressENTER/
ToturnonRogerBeep:
PressCH todisplayon,thenpressENTER/
Adjusting the Sound (Beep Tone)
Yourradiosoundsabeepeachtimeyou
pressakey(exceptforPTTandBOOST).
liferemaining.
• Donotrechargealkalinebatteries.Doingsocan
createasafetyhazardordamagetheradio.
• Forfastercharging,turnofftheradiobefore
charging.
Warning!
• Thechargingcradleisnotwaterproof.Ifthe
chargingcradlefallsinthewater,unplugitbefore
attemptingtoremoveitfromthewater.Allowthe
cradletodrycompletelybeforereconnectingthe
power.
• Wipeoffdirtorshakewaterfromyourradio
beforeplacinginthechargingcradleifyourradio
issoiledorwet.
USING A HEADSET
GMR5088-2CKHSandGMR5095-2CKHSboth
comewithanearbudheadsetwithmiconthe
cord.TheGMR5098-2CKVPcomeswithboom
micheadset.Touseaheadset,lifttherubber
coverfromovertheheadsetjack,thenplugin
theheadset.
Important: Your radio is not waterproof when
using a headset jack. When you remove the
headset, be sure to fully press the jack cover
into place to restore its waterproof capability.
USING RADIO BATTERY LEVEL
AND LOW BATTERY ALERT
Thisradiohasabatterylevelmeterthat
indicatesthebatterypowerlevel.Whenthe
batterylevelislow,thebatterylevelmetericon
flashesandthenBATT appearsafter30
seconds.RechargetheNiMHbatteries
immediately.
Warning!To avoid the risk of personal injury or
property damage from fire or electrical shock,
only use the Uniden accessories specifically
designated for this product.
USING THE RADIO
Inordertogetthemostoutofyournewradio,
readthisreferenceguidecompletelybefore
attemptingtooperateit.
Turning the Radio On and Adjusting
the Volume
1.PressandholdMENU/ toturntheradio
on.
2.PressVO or toincreaseordecrease
thevolumelevelthenpressENTER/ .
3.PressandholdMENU/ toturntheradio
off.
Choosing a Channel
Yourradiohas22channelsand142Privacy
codesyoucanusetotalktoothers.Inorderto