Page 15 of 17
© 2017
Ma
k
a
T
e
c
hnologie
s
G
roup
. A
ll Righ
ts
Re
s
er
v
ed
.
Getting
Started
Multi-Connection for TWS-X100
TM
TWS-X100 cannot connect two phones at the same
time on both
earbuds. Only when using single earbud can be supported both phone.
°
Multi
-
Connection:
Follow the instructions in the "Pairing" section (individual)
to connect
the Bluetooth headset to device1.
Once connection is successfully established, disable the
BIuetooth function on device 1 and turn off the Bluetooth
headset.
Follow the instructions in the "Pairing" section to connect the
Bluetooth headset to device 2.
Once connection between device2 and the Bluetooth headset
is established, go back to device 1 and turn on BIuetooth
function on device 1.
The Bluetooth headset should automatically connect to
device
1.
Or you can simply tap the headset name to connect from
your device if it doesn’t connect automatically.
You have now maintained an active connection with 2 devices
at the same time. You can now make/answer phone calls from
both devices.
Only host earphone left earbuds can make phone calls. When
a second phone has in-coming call, need to press the key to
hold on the first phone’s call, and press it again to pick up the
second phone' calling.