Assembly Instruction
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!
4 1
Fix Top Cap (2) on top of the Shelf Panel (A),
as shown.
STEP 2
Recommended Maximum Weight
Furinno Turn-N-Tube 4-Tier Multipurpose
Shelf Display Rack
1802820180316
MODEL :
18028
*Unit in Pound(lbs)
In order to prevent product tip over, please follow the
instruction below to secure the unit to the wall.
STEP 3
CABLE
TIE
WALL
1
WALL
1 SET
WALL PLUG
1/4’’
DRILL BIT
HARDWARE PARTS LIST QTY
WALL PLUG EYELET SCREW
CABLE TIE
EYELET SCREW
No Tools Required
Recomm. 1 Person
Approx. 10 minutes
15
15
15
15
A
2
2
2
2
STEP 1
1.1 Attach Square Leg (3) to the bottom of Shelf Panel (A) and tighten to Long Pole (1) .
1.2 Attach another Shelf Panel (A) and repeat the steps, as shown.
2
STEP 1.1
STEP 1.2
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
12pcs
4pcs
4pcs
A 4pcs
Shelf Panel
Square Leg
No Hardware List Qty No QtyParts List
Long Pole
Top Cap
2 3
3
A
A
A
A
1
A
A
A
1
1
1
1
1
1
1
1
1
1
1
1
3
3
3
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Furinno 17046 Installation guide
-
-
-
-
-
-
-
-
-
