Standard Horizon Wiring CP300 & CP500 to GX2100 Owner's manual
- Type
- Owner's manual
Green Green
Green Green
AIS In
AIS In
PWR
ACC 1
PWR
ACC 1
ACC 2
ACC 2
GPS Out
GPS In
NMEA -
NMEA -
DSC In
DSC In
Blue Blue
Blue
Blue Blue
Gray
Gray
Gray
Gray
Brown
Brown
Brown
RAM3
STATION 1
STATION 2
CP500
GPS Ant
CP300
GX2100
NOTE: AIS Port SettingsNOTE: AIS Port Settings
Port 2 must be changed to AIS 38400 on Cp300 and Cp500 to receive AIS targets from GX2100:
1. From the Chart page, press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU
and the press [ENT] key.
2. Move the ShuttlePoint knob to highlight ADVANCED SETUP and press the [ENT] key.
3. Move the ShuttlePoint knob to highlight IN/OUT CONNECTIONS and press the [ENT] key.
4. Move the ShuttlePoint knob to highlight PORT2 INPUT and press the [ENT] key.
-
1
Standard Horizon Wiring CP300 & CP500 to GX2100 Owner's manual
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Standard Horizon Wiring Chart plotter to Matrix AIS Owner's manual
-
-
-
-
-
-
-
-
-