Howard BBB012 User guide

Type
User guide

Howard BBB012

The Howard BBB012 is a cutting board oil that is safe for all surfaces that come in contact with food. It is colorless, odorless, tasteless, and will never go rancid. The oil is ideal for seasoning wood surfaces before using Howard Butcher Block Conditioner.

To use the Howard BBB012, apply it with a clean soft cloth to the surface of the cutting board or butcher block. Let it soak in for at least 20 minutes before wiping off any excess. For best results, apply 2-3 coats of oil.

The Howard BBB012 is a great way to protect your cutting boards and butcher blocks from damage.

Howard BBB012

The Howard BBB012 is a cutting board oil that is safe for all surfaces that come in contact with food. It is colorless, odorless, tasteless, and will never go rancid. The oil is ideal for seasoning wood surfaces before using Howard Butcher Block Conditioner.

To use the Howard BBB012, apply it with a clean soft cloth to the surface of the cutting board or butcher block. Let it soak in for at least 20 minutes before wiping off any excess. For best results, apply 2-3 coats of oil.

The Howard BBB012 is a great way to protect your cutting boards and butcher blocks from damage.

Product Description
Cutting Board Oil contains clear, odorless, pure
food grade mineral oil stabilized with Vitamin E.
Our Cutting Board Oil meets FDA requirements
for food contact surfaces, and is safe for all food
preparation surfaces. It is non-hazardous and
will never go rancid. This product is perfect for
seasoning cutting boards and butcher blocks.
Meets all requirements for USP Light Mineral
Oil, National Formulary (NF), FDA 21 CFR
172.878 and 21 CFR 178.3620 (a) for direct and
indirect contact with food. The mineral oil used
in Howard Cutting Board Oil is from virgin
mineral oils and has no contact with nuts or
gluten or other potentially allergenic materials
either in production, storage, or transport.
Features
Safe for all surfaces that come in contact
with food
Colorless, odorless, tasteless, and will never
go rancid
Ideal for seasoning wood surfaces before
using Howard Butcher Block Conditioner
100% food grade mineral oil enriched with
Vitamin E
Product Specifications
Base:
Oil
Sheen/Finish:
Clear
Coverage:
100 sq. ft.
Shelf Life:
5 years unopened
Sizes:
12 oz.
Use Location:
Indoor
Surface Preparation
Make sure the surface if free of dust, dirt,
grime, and other contamination.
Application
Apply Cutting Board Oil with a clean soft cloth.
Let it soak in for at least 20 minutes before
wiping off any excess. To properly season
cutting boards, apply 2-3 coats of Cutting Board
Oil. On large cutting boards, butcher blocks, and
countertops, apply 3-4 coats. Additional coats
help ensure that the Cutting Board Oil fully
saturates the wood. After seasoning the wood
with Cutting Board Oil, maintain it with Howard
Butcher Block Conditioner.
Thinning
Apply at bottle consistency.
Precautions
Always test in an inconspicuous area to check
results. For additional safety information,
consult the Safety Data Sheet for this product.
Proper Disposal
For proper disposal of excess material, please
contact your local city or county waste
management agency.
Limited Warranty: This product is made from
the finest raw materials available and
manufactured to proven formulation under
strict quality control for its intended use on
natural wood. However, results obtained with
the use of this product under a variety of
conditions may depend on circumstances
beyond our control. Howard Products, Inc. and
the seller therefore disclaim any responsibility
for expense or consequential damage of any
kind. The only warranty extended, expressed or
implied, is for defective workmanship or
materials.
Howard Products, Inc. Cutting Board Oil
  • Page 1 1

Howard BBB012 User guide

Type
User guide

Howard BBB012

The Howard BBB012 is a cutting board oil that is safe for all surfaces that come in contact with food. It is colorless, odorless, tasteless, and will never go rancid. The oil is ideal for seasoning wood surfaces before using Howard Butcher Block Conditioner.

To use the Howard BBB012, apply it with a clean soft cloth to the surface of the cutting board or butcher block. Let it soak in for at least 20 minutes before wiping off any excess. For best results, apply 2-3 coats of oil.

The Howard BBB012 is a great way to protect your cutting boards and butcher blocks from damage.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI