Troy-Bilt 23AABA6X711 Fast Start Guide

Type
Fast Start Guide

This manual is also suitable for

778-13530© 2015 23AAFAAX
Chute Deflector
Chipper Chute
Hopper
Remove the wing knobs (a) from each side of
the lower impeller housing. Remove the hex
lock nut (b), spacers (c), and hex bolt (d) from the
top of the impeller housing.
(a)
(c)
(c)
(d)
(b)
(a)
(c)
(c)
(d)
(b)
1
2
2
Align the chute deflector in position on
the discharge opening and insert hex
bolt (d) with spacer (c) through hinge
on chute deflector (spacers fit inside
of hinges). Place second spacer (c) over
hex bolt (d) inside other hinge and
secure with hex lock nut (b).
(a)
(a)
Secure both sides of chute deflector to impeller
housing using wing knobs (a) removed in Step 1.
Place the opening of the bag completely
over the chute deflector. Position the bag
so that the wing knobs which secure the
chute deflector to the impeller housing are
completely covered. Pull on the draw-strap
until the bag is tight around chute deflector
opening.
1
3
2
4
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
  • Page 1 1

Troy-Bilt 23AABA6X711 Fast Start Guide

Type
Fast Start Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI