Regency LCTRT16852MH Operating instructions

Brand: Regency

Model: LCTRT16852MH

Type: Operating instructions

This manual is also suitable for

Parts: Quantity will vary with model.

A: End Leg B: Center Leg

Quantity: 2

H: Thumb

Screws

I: Flat

Bracket

D: Stringer

F: Cord Holder

G: EClip Bracket

IMPORTANT NOTICE:

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.

Check to be sure that you have all parts and hardware.

Remove all wrapping materials, including staples & packing straps before you start to assemble.

Keep all hardware parts and packaging out of reach of children.

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

C: Round End

Legacy Modular Conference Table • INSTRUCTIONS

(LCTRT14452, LCTRT16852, LCTRT19252, LCTRT21652, LCTRT21652,

LCTRT24052, LCTRT26452, LCTRT28852)

Organize your parts. You may need a rubber mallet.

E: Center Piece

Hardware: Quantity will vary with model.

J: DPEL

STEP 2: Attach Stringer(D) to Center Leg(B) by lining up Eclip with it’s corresponding hole, and sliding down into place.

Please Note: Center Legs (B) have EClip attachment holes on both sides.

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

Figure 1

Legacy Modular Conference Table • INSTRUCTIONS

(LCTRT14452, LCTRT16852, LCTRT19252, LCTRT21652, LCTRT21652,

LCTRT24052, LCTRT26452, LCTRT28852)

Organize your parts. You may need a rubber mallet.

STEP 1: Attach Stringer(A) to one of the End Legs(A) by lining up the Eclip with its corresponding holes, and sliding down

into place

(see gure 1.)

Please Note: End Legs (A) have EClip attachment holes on one side only.

STEP 4: Attach EClip Brackets(G) into precut slots in the center of each Stringer(D). Line up Lockdowels with available

holes, and press down to snap into place.

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

STEP 3: Attach next Stringer(D) to other side of Center Leg(B) by lining up Eclip with corresponding holes, and sliding down

into place.

STEP 4: Attach next End Leg(A) or Center Leg(B) (Will vary depending on model of table.) Attach by lining up holes with

corresponding Eclip, and slilding down into place.

D D

Please Note: Depending on your model of table, you may need to repeat STEP 3 & STEP 4 until you have used all

Center

Legs(B)

, and

Stringers(D)

provided.

Legacy Modular Conference Table • INSTRUCTIONS

(LCTRT14452, LCTRT16852, LCTRT19252, LCTRT21652, LCTRT21652,

LCTRT24052, LCTRT26452, LCTRT28852)

Organize your parts. You may need a rubber mallet.

STEP 5: Attach Center Piece(E) onto assembled base by lining up pre-drilled holes on the bottom with the EClips on

each Eclip Bracket(G) and Center Leg(B) and sliding into place.

Please Note: Repeat this step until you have used all

included

Center Pieces(E).

STEP 6: Attach Round Ends(C) to assembled product by lining up pre-drilled holes on bottom with the EClips on both the

End Legs(A) and EClip Brackets(G) and then sliding Round Ends(C) into place.

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

A A

Legacy Modular Conference Table • INSTRUCTIONS

(LCTRT14452, LCTRT16852, LCTRT19252, LCTRT21652, LCTRT21652,

LCTRT24052, LCTRT26452, LCTRT28852)

Organize your parts. You may need a rubber mallet.

STEP 7A: From underneath the table, lock all available Sash Locks on the Center Pieces(E) (see gure 1).

STEP 7B: From underneath the table, attach all available Flat Brackets(E) by using Thumb Screws(E) (see gure 2).

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

Figure 2.Figure 1.

OPTIONAL STEP 8: Insert DPEL(J) using provided screws.

OPTIONAL STEP 9: Attach Cord Holder(F) underneath table onto cam lock side of Stringer(D) with provided double

sided tape.

Legacy Modular Conference Table • INSTRUCTIONS

(LCTRT14452, LCTRT16852, LCTRT19252, LCTRT21652, LCTRT21652,

LCTRT24052, LCTRT26452, LCTRT28852)

Organize your parts. You may need a rubber mallet.

Regency LCTRT16852MH Operating instructions

Brand: Regency

Model: LCTRT16852MH

Type: Operating instructions

This manual is also suitable for

Download PDF

report

Regency LCTRT16852MH Operating instructions

This manual is also suitable for

Regency LCTRT16852MH Operating instructions

Related papers

Other documents