2. Toro
  3. Loader Arm Target Plate Kit, TXL 2000 Tool Carrier

Toro Loader Arm Target Plate Kit, TXL 2000 Tool Carrier Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Loader Arm Target Plate Kit, TXL 2000 Tool Carrier Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3435-704RevA
LoaderArmTargetPlateKit
TXL2000ToolCarrier
ModelNo.139-4880
InstallationInstructions
Installation
PreparingtheMachine
1.Parkthemachineonalevelsurface.
2.Removeanyattachments;refertotheOperator’s
Manualforthemachine.
3.Raisetheloaderarmsandsecurethemwith
cylinderlocks.
4.Shutofftheengineandremovethekey.
InstallingtheKit
1.Ontheundersideoftheleftloaderarm,marka
line14.6cm(5-3/4inches)fromthepivotplate
attherearofthearm(Figure1).
g303600
Figure1
1.Leftloaderarm
3.Pivotplate
2.14.6cm(5-3/4inches)
2.Alignthetargetplatewiththelineandinneredge
oftheloaderarmandmarktheholelocations
(Figure2andFigure3).
g304387
Figure2
1.Targetplate
g303599
Figure3
1.Targetplate
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3435-704*A
3.Usinga7/32inchdrillbit,drillthroughthe
undersideoftheloaderarmatthe2marked
locations.
4.Usetheself-tappingscrewstoinstallthetarget
plate(Figure4).
g303598
Figure4
1.Self-tappingscrews
2
/