Honeywell
Portable Air Conditioners
HL Series*
Window Bracket Panel Adapter
Easy Assembly Guide
=
Window Bracket Panel Adapter
1. Remove protective plastic film.
3. Locate and align the top hinges. Apply pressure
to snap ONE side of the top hinge (see picture 3).
Pull apart this top hinge and re-connect. Repeat 3
to 4 times (see picture 4).
Scan QR code for Video Guide:
NOTE: The hinges may be tight and difficult to
connect at first. They will loosen the more times
you repeat Step 3.
(Picture 3) (Picture 4)
(Picture 1) (Picture 2)
Top Hinge
5. Connect both top hinges and the remaining
hinges together one by one. You will hear a loud
click to indicate that both halves are connected
properly (see picture 5 & 6).
7. The Window Bracket Panel Adapter is ready.
Complete the remaining window bracket
installation as instructed in the User Manual
(pages 3-4).
(Picture 6)(Picture 5)
1
2
3
4
4. Repeat step 3 for the top hinge on the opposite
side of the panel adapter.
2. Hold the two half pieces in each hand with the
round end facing upwards (see picture 1 & 2).
Having installation trouble?
Our Customer Service team can assist you:
JMATEK North America LLC
Mahwah, New Jersey 07495 USA
Phone: 1-800-474-2147
Service Hours:
Monday to Friday (8:30am-5:30pm)
*
HL10CESWW, HL10CESWK, HL10CESWG, HL10CESWB
HL12CESWW, HL12CESWK, HL12CESWG, HL12CESWB
HL14CESWW, HL14CESWK, HL14CESWG, HL14CESWB
HL14CHESWW, HL14CHESWK, HL14CHESWG, HL14CHESWB
Model No.:
o
C
o
F
COOL
DRY
FAN
POWER
TIMER
SLEEP
WATER
FULL
HIGH
MID
LOW
TIMER
SLEEP
© 2016 JMATEK Limited. All rights reserved.
The Honeywell Trademark is used under license from Honeywell International Inc.
Honeywell International Inc. makes no representations or warranties with respect to these products.
These products are manufactured by JMATEK Limited.