Allied Brass CH-91-ABR Installation guide

18.00 "

0.496

0.25

DETAIL O

Step 1:

Determine your desired location for installation and make a mark for the location of the base plate. Make 2 marks each side

where mounting screws will be placed as shown below. Drill hole at each of the marks.

Drill holes Ceiling to mount base plate.

CH-91

INSTALLATION INSTRUCTIONS

No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.

MIRROR

DETAIL P

BASE PLATE

BASE TUBE

SCREW

Step 2:

Loosen threaded rod. Then fasten base plate with screws provided to the ceiling.

Attaching Base Plate to Ceiling

PERSPECTIVE

CH-91

INSTALLATION INSTRUCTIONS

No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.