4
Tel: 1-800-700-4242
|
Fax: 1-877-4280
To Connect
To Disconnect
Keep product clean in a bag until ready to use.
1. Depressurize the system.
2. Turn locking cap quarter turn counter clockwise.
3. Push against release collar and pull pipe to release.
Tube Stop O-Ring
Support Washer Stainless Steel
Teeth Grip Pipe
Release Collar
How to make a
ProLock Connection
Step 1: Push
When cutting SharkBite PE-RT Pipe,
ensure that the ends are cut square and
the surface is smooth. Ensure that both
the ProLock ttings and pipe are clean
and free of debris. Push pipe onto tting.
Step 2: Twist
Turn the locking cap quarter turn
clockwise to the locked position, an
audible click will be heard.
Step 3: Lock
To ensure that the tting has been
locked, check to make sure the indicator
marks are aligned.
Tel: 1-800-700-4242
|
Fax: 1-877-4280
