Blaze King OM-1714_Z2514 - Classic fan kit Owner's manual

OM-Z1714_Z2514 E v1.05 pending May 9, 2014

Z1714 / Z2514 FAN KIT

Page 1

 e BLAZE KING Classic Fan Kit (Z1714) consists of 2 axial fans located in separate housings that are

mounted on the rear of the King (KE1107), Princess (PE1006), Chinook 30.1 (CK30.1), Sirocco 30.1 (SC30.1),

or wood stoves.

 e BLAZE KING 20.1 Series Fan Kit (Z2514) also consists of 2 axial fans located in separate housings

that are mounted on the rear of the Chinook 20.1 (CK20.1) or the Sirocco 20.1 (SC20.1) wood stoves.

If at all possible try to install the fan assemblies before the stove is in place as you might have to rotate the

fan past the rear clearance and against the back wall to install it into its lower o set bracket.

BLAZE KING WOOD STOVES

INSTALLATION

1. On the rear of the stove remove the 2 cover plates from the blower exhaust or convection deck(4 sheet

metal screws).

OM-Z1714_Z2514 E v1.05 pending May 9, 2014

Z1714 / Z2514 FAN KIT

Page 2

OM-Z1714_Z2514 E v1.05 pending May 9, 2014

2. Insert fan assembly so top  ange goes into the blower exhaust or convection deck and secure with the

screws removed from step 1.

BLAZE KING WOOD STOVES cont.

CONVECTION

DECK

May have to bend

lower bracket out

slightly using a ﬂ at

head screw driver.

FAN TOPS INTO CONVECTION DECK

Download PDF