Trademark Innovations PITCHBACK-BL Operating instructions
- Type
- Operating instructions
PITCH BACK
Assembly Instructions
Attach two L poles and one straight pole to form a U.
Repeat process with remaining L and straight poles
until you have three completed U’s.
Next, combine the U’s and the two Y connectors to
form the main structure.
To attach the net as easily as possible, use 6-10 elastic
ties to secure the corners of the net so it stays in
place as shown. Attach elastic ties as shown.
STEP 1 STEP 2
STEP 3
STEP 4
STEP 5
Parts:
A
B
C
D
E
F
Le�er
Name
QTY
A
L poles
6
B
Straight Poles
3
C
Y connector
2
D
Elas�c Ties
40
E
Net
1
F
Stakes
4
Once you have your starting ties on, you can apply the
remainder of the ties as evenly around the net as
possible to provide proper tension.
Use 2 stakes on each base
of the frame to secure the
pitchback into the ground.
Your pitchback is now
ready to use.
THANK YOU FOR YOUR PURCHASE.
WE VALUE OUR CUSTOMERS AND WANT TO BE
SURE YOU ARE SATISFIED WITH YOUR PRODUCT.
IF YOU HAVE ANY QUESTIONS OR CONCERNS OR
YOU ARE NOT COMPLETELY SATISFIED, PLEASE
CONTACT OUR OFFICE AT 1-800-906-1639.
-
1
Trademark Innovations PITCHBACK-BL Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Jumpking JK1404C1 Owner's manual
-
-
-
-
-
-
Bazoongi BZJP7506 Installation guide
-
-
-
