JONATHAN Y JYL9519A Operating instructions

Type
Operating instructions

JONATHAN Y JYL9519A is an elegant and versatile lighting fixture that can elevate the ambiance of any room. With its classic design and adjustable features, it offers a wide range of customization options to suit your specific needs and preferences.

The fixture is designed to be installed by a licensed electrician for safety. It features a sturdy mounting bracket that securely attaches to the junction box, ensuring stability and longevity. The adjustable chain and collar loop allow you to customize the height of the fixture, making it suitable for rooms with various ceiling heights.

Once installed, the JONATHAN Y JYL9519A provides ample illumination with its six candle-style sockets. Each socket can accommodate a type "B" bulb with a maximum wattage of 40, a CFL bulb with a maximum wattage of 9, or an LED bulb with a maximum wattage of 9. The fixture includes six 4-watt LED bulbs, offering energy efficiency and a warm, inviting glow.

JONATHAN Y JYL9519A is an elegant and versatile lighting fixture that can elevate the ambiance of any room. With its classic design and adjustable features, it offers a wide range of customization options to suit your specific needs and preferences.

The fixture is designed to be installed by a licensed electrician for safety. It features a sturdy mounting bracket that securely attaches to the junction box, ensuring stability and longevity. The adjustable chain and collar loop allow you to customize the height of the fixture, making it suitable for rooms with various ceiling heights.

Once installed, the JONATHAN Y JYL9519A provides ample illumination with its six candle-style sockets. Each socket can accommodate a type "B" bulb with a maximum wattage of 40, a CFL bulb with a maximum wattage of 9, or an LED bulb with a maximum wattage of 9. The fixture includes six 4-watt LED bulbs, offering energy efficiency and a warm, inviting glow.

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model#: JYL9519A
Product Dimensions: 28.5"D X26"H
To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe
the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the
fuse at the fuse box. Next, use a dry or slightly dampened clean clorth (use clean water, never a solvent) to wipe the
interior surface of the fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use
and installation
*The external flexible cable or cord of this lamp cannot be replaced
If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
mounting
bracket
1X M
T5 hex nut
1X
B
green ground
screw
1X N
Screw
6X
C machine screw 2X O centeral rod 1X
D wire connector 3X P metal tube 1X
E collar loop 1X R ball nut 6X
F canopy 1X S wooden strip 6X
G out ring 1X T screw unit 6X
H chain 1X U bulb 6X
I fixture loop 1X V candle sleeves 6X
J cup 2X
W fixture body 1X
K
T3 hex nut
2X
L
metal plate
2X Y finial 1X
1/2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
1. Attach the metal tube (P) to the fixture (Q), then fix the metal plate unit (N) to the centeral rod (O) with cup (J) and T5 hex nut (M).
2. Align the bottom wooden strip (S) to the metal plate (N1), fix it with screw (T). Then align the top
of wooden strip (S) to metal plate (L), thread the screw (N) through metal plate (L), secure with ball
nut (R).
3. Secure the metal plate (L) by T3 hex nut (K) and cup (J), finally fix by fixture loop (I).
Connect, Hot, Black or Red Outlet Supply Wire to:
Connect, Neutral, White Outlet Supply Wire to:
Black
White
* Parallel Cord (round & smooth)
* Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor
Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped
and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw(B) on mounting bracket, no less than 2" from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw on mounting bracket. Tighten ground screw.
4. Attach the mounting bracket (A) to the junction box with machine screw (C).
5. Fix the collar loop (E) to the mounting bracket (A).
6. Thread the chain (H) through the out ring (G) and canopy (F), then lock it to the collar loop (E) and the
fixture body (I) by using the chain links.
7. Connect the wire with wire connector (D).
8. Attach the collar loop (E) to the canopy (F) with out ring (G).
9. Place the candle sleeves (V) to the socket, then install the bulb (U) to the socket.
10. Attach the finial (Y) to the bottom of fixture.
PLEASE USE TYPE"B" BULB H MAX 40-WATT OR CFL BULB MAX 9-WATT OR LED 9-WATT BULB,
THERE ARE 6PCS 4-WATT LED BULBS IN THE BOX
ENJOY YOUR LAMP
N1
K
J
L
W
F
H
G
A
C
D
B
E
M
Q
S
T
R
U
V
Y
J
L
I
N
P
O
X
2/2
  • Page 1 1
  • Page 2 2

JONATHAN Y JYL9519A Operating instructions

Type
Operating instructions

JONATHAN Y JYL9519A is an elegant and versatile lighting fixture that can elevate the ambiance of any room. With its classic design and adjustable features, it offers a wide range of customization options to suit your specific needs and preferences.

The fixture is designed to be installed by a licensed electrician for safety. It features a sturdy mounting bracket that securely attaches to the junction box, ensuring stability and longevity. The adjustable chain and collar loop allow you to customize the height of the fixture, making it suitable for rooms with various ceiling heights.

Once installed, the JONATHAN Y JYL9519A provides ample illumination with its six candle-style sockets. Each socket can accommodate a type "B" bulb with a maximum wattage of 40, a CFL bulb with a maximum wattage of 9, or an LED bulb with a maximum wattage of 9. The fixture includes six 4-watt LED bulbs, offering energy efficiency and a warm, inviting glow.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI