1
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
■
ZV-3014 REV 0 01/15/2014
352TS
Dia
™
Diverter Tub Spout
Operation & Maintenance Manual
Model Number Specifications
352TS Dia Diverter Tub Spout
7" diverter tub spout made from metal and plastic
materials plated in standard polished chrome nish.
Modifications Compliance
-STN Satin nickel finish
Note: Append appropriate -sufx to model number.
-ASME A112.18.1/CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Dimensions
Measurements
A Ø 2 1/2”, 64 mm
B 4 3/4”, 121 mm
C 7”, 178 mm
D 1/2”-14 NPT
Required for Installation
Teon Tape
Note: Dimensions are subject to change without notice.
CC
D
D
B
B
AA
2
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
■
ZV-3014 REV 0 01/15/2014
1) Install diverter tub spout onto 1/2" NPT stub out
pipe. Turn clockwise to secure.
1) Diverter lever in down position for tub spout
operation.
2) Diverter lever in up position for shower operation.
352TS
Dia
™
Diverter Tub Spout
Operation & Maintenance Manual
Installation Operation
1
2
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
-
1
-
2
Symmons 352TS Installation guide
- Category
- Faucets
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Symmons 522TS Installation guide
-
-
Symmons Industries 443RH-STN Installation guide
-
-
-
Symmons 4503-STN-TRM Installation guide
-
-
-
-