1
POW250X
POW250X
User’s Guide
CONTEC CO.,LTD.
Thank you for purchasing the POW250X. POW250X is a power supply for FA-PAC (PCI) series
exchange. Please use it referring to the following matter.
This Product Includes
- Power Supply…1
- Power Cord…1
- User's Guide…1
Exchange Process
1) First remove the power cord from the chassis. And remove the screws that hold in place
the cover. Then open the cover.
Cover
Screw
Rear
Power Cord
POW250X User’s Guide
POW250X
2
2) Remove the power connectors from the fan and backplane respectively.
Back Plane
Power Supply
Rear
Fan
Front
3) Remove four screws on that hold in place of the power unit from the rear panel.
Then take the used power unit out.
Rear
Power Supply
Screw
If fixed two screws inside,
remove two screws inside,too.
POW250X User’s Guide
3
POW250X
4) Replace this new power unit into the chassis. Fix the unit to the rear panel with four
screws on rear. Tighten the screws so that the unit is held in
place.
New
Power Supply
Rear
Screw
5) Connect between the fan and the backplane, and the power supply based on the following
diagram, respectively.
Back Plane
Power Supply
Rear
Fan
Front
POW250X User’s Guide
6) Fix the chassis cover with screws. Tighten the screws so that the cover is held in place.
Connect the power cord.
Cover
Screw
Rear
Power Cord
CONTEC CO., LTD. March 2004 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/
Chinese http://www.contec.com.cn/
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD. [03182004]
[02042000] Management No. A-46-180
[03182004_rev2] Parts No. LZN8671
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Contec POW300X Owner's manual
-
-
-
-
-
-
-
-
Contec FAN0925 Owner's manual
-