Contec POA200-20-2 Owner's manual

Brand: Contec

Model: POA200-20-2

Type: Owner's manual

Contec POA200-20-2 is an AC-DC power adapter that converts alternating current (AC) to direct current (DC) to power devices. It has a wide input voltage range of 90-264VAC and provides a stable output of +5VDC at 2A. The compact and lightweight design makes it portable and easy to use. It also features protection against short interruptions and has a life expectancy of 1.5 years at 40°C ambient temperature. With its reliable performance and safety features, the Contec POA200-20-2 is a dependable power solution for various electronic devices.

POA200-20-2

AC-DC Power Adaptor(5VDC, 2A)

POA200-20-2 User’s Guide

CONTEC CO.,LTD.

This product is the AC adapter for input: 90 - 264VAC and output: +5VDC 2A.

Dimensions

Connector

MC1,5/3-ST-3,5 [made by Phoenix Contact Corp.]

Specifications

Item Specification

Input voltage range 90 - 264VAC

Rated input current 300mA

Number of frequency 50 - 60Hz

Rated output voltage 5.0VDC

Rated output current 2.0A (Max.)

Dimension (mm) 47.5(W) x 75(D) x 27.3(H) (No protrusions)

Weight 175g

Operating temperature

0 - 40℃

Operating humidity 20 - 80%RH(No condensation)

Life expectancy

1.5 years at the ambient temperature 40℃(When 100VAC is input and 2.0A is output)

4 years at the ambient temperature 40℃(When 100VAC is input and 1.3A is output)*1

Allowable time of short

interruption

15ms (Max.) (When 100VAC is input and 1.3A is output) *2

Floating dust particles Not to be excessive

Corrosive gases

None

Voltage corresponding to the

attached AC cable

125VAC 7A

*1 The current consumption(Max.) of the F&eIT N series supported by this product is 6.5W.

When the short interruption occurs and the defective operation of the equipment is generated, please insert the

power supply of the equipment after pulling out it.

POA200-20-2 User’s Guide

CONTEC CO., LTD. May 2011 Edition

3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan

Japanese http://www.contec.co.jp/

English http://www.contec.com/ NA01071 (LYMB261)

Chinese http://www.contec.com.cn/ [05202011]

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

CAUTION

- Do not strike or bend this product.

Otherwise, this may malfunction, overheat, cause a failure or breakage.

- When plugging or unplugging the power cable, be sure to hold it by the plug itself.

- Do not insert or remove the connector while the power is turned on to the PC.

Failure to observe this precaution may cause malfunction, overheating.

- Insert or remove the cable straightly.

Otherwise, the part of connector may distort, cause a failure or breakage.

- No part of this document may be copied or reproduced in any form by any means without prior

written consent of CONTEC CO., LTD.

- All relevant issues have been considered in the preparation of this document.

Should you notice an omission or any questionable item in this document, please feel free to notify

CONTEC CO., LTD.

- The specifications of this product are subject to change without notice for enhancement and quality

improvement.

Even when using this product continuously, be sure to read the manual and understand the contents.

- Do not modify this product. CONTEC will bear no responsibility for any problems, etc., resulting

from modifying this product.

- Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may

appear in this document or for any results of using the product.

Contec POA200-20-2 Owner's manual

Contec POA200-20-2 Owner's manual

Contec POA200-20-2 Owner's manual

Related papers