Hampton Bay 17267 Operating instructions

Brand: Hampton Bay

Model: 17267

Type: Operating instructions

Hampton Bay 17267 is a 2 Light Semi Flush Mount in Olde Walnut Finish. It's a timeless and elegant design that is easy to assemble and install. This light fixture is perfect for any room in your home, and it will provide you with years of beautiful lighting. Here are some of the features of the Hampton Bay 17267:

It uses two 100-watt maximum bulbs, so it will provide plenty of light for your room.
It has a traditional design that will complement any décor.
It is easy to assemble and install, so you can get it up and running quickly.
It is made from high-quality materials, so it will last for years to come.

It uses two 100-watt maximum bulbs, so it will provide plenty of light for your room.
It has a traditional design that will complement any décor.
It is easy to assemble and install, so you can get it up and running quickly.
It is made from high-quality materials, so it will last for years to come.

Page 1

INSTRUCTION MANUAL

2 Light Semi Flush Mount in Olde Walnut Finish

Home Depot SKU 1001257018 (UPC 718212172674)

(Olde Walnut fixture)

Page 2

Thank you for purchasing this Hampton Bay interior light fixture. This

product has been manufactured with the highest standards of safety and

quality.

FEATURES:

1. Traditional 2 Light Semi Flush Mount in Olde Walnut Finish.

2. Timeless Elegant Design.

3. Easy to assemble and install.

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local Home Depot, please call our Customer

Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.

Please

reference your SKU (1001257018 Olde Walnut fixture)

UPC (718212172674 Olde Walnut fixture).

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous

fixture, disconnect the power by turning off the circuit breaker or by

removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS.

3. If you have any non-electrical questions about this fixture, please

contact our Customer Service Team at 1-855-HD-HAMPTON or visit

www.hamptonbay.com. Please reference your SKU (1001257018 Olde

Walnut fixture) or UPC (718212172674 Olde Walnut fixture).

4. Keep your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION

(not included):

Light Bulb

(100 watt maximum)

Safety goggles

Step Ladder

Wire strippers

Flathead screwdriver Phillips screwdriver

Electrical tape

Wire cutters

Page 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

1 Glass Shade (#10)

3 Arm (#2)

ASSEMBLY INSTRUCTIONS:

1. Shut o ff power at the fuse box or circuit breaker box, if necessary remove old fixture

and all mounting hardware from outlet box.

2. Carefully unpack your new fixture and lay out all the parts on a clear area, Take care

not to lose any small parts necessary for installation.

3 Long

Knurled Ball Nut (#4)

6 Short

Knurled Ball Nut (#3

1 Pipe (#6) 1 Finial (#12)

1 Cap (#11)

3 Bracket (#5)

2 Metal Washer#8) 2 Plastic Washer#7) 2 Hex Nut#9)

3. Align the hole (without threads) of the Bracket (#5) to the hole of Round Flat Washer (#19),

assemble them with the Short Knurled Ball Nut (#3) until tightened.

4. Assemble the Arm (#2) to the Canopy (#1) and Bracket (#5), fasten the Arm (#2) to the

top Canopy (#1) with Short Knurled Ball Nut (#3) and to the Bracket (#5) with Long

Knurled Ball Nut (#4).

5. Attach Pipe (#6) to the Hickey and then thread Hex Nut (#9), attached Metal Washer (#8)

and Plastic Washer (#7) onto the bottom end of Pipe (#6). The Hex Nut (#9), Metal

Washer (#8) and Plastic Washer (#7) will allow you to adjust the height of the Glass Shade.

7. Slide the Glass Shade (#10) upwards over Pipe (#6). While holding the Glass Shade,

slide Plastic Washer (#7), Metal Washer (#8), Hex Nut (#9) and Cap (#11) over the

Pipe (#6), and secure with Finial (#12).

6. Install the proper Light bulb (not included) in accordance with the fixture’s specification.

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING).

Page 5

ASSEMBLY:

2. Arm

4. Long Knurled Ball Nut

5. Bracket

9. Hex Nut

3. Short Knurled

Ball Nut

19. Round Flat

Washer

3. Short Knurled Ball Nut

6. Pipe

8. Metal Washer

7. Plastic Washer

10. Glass Shade

7. Plastic Washer

8. Metal Washer

9. Hex Nut

11. Cap

12. Finial

Hickey

1. Canopy

Page 6

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

INSTALLATION INSTRUCTIONS:

1 Mounting Plate (#13)

1 Ground Screw (#14)

2 Outlet Box Screws (#16)

3 Mounting Screw (#17)

3 Wire Connectors (#15)

While holding the canopy(#1) toward the ceiling, connect the electrical wire as shown.

and the black wire from the fixture to the black wire from the Outlet Box (#18). Cover

the two wire connections using the two provided Wire Connectors (#15). Wrap the two

wire connections with electrical tape for a more secure connection. If your outlet box

has a ground wire (green or bare copper), connect fixture’s ground wire to it using the

wire connector (#15). Otherwise connect the copper ground from the fixture to Ground

screw (#14) on the Mountig Plate (#13). Note: If you have electrical questions, consult

your local electrical code for approved grounding method.

4. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the

light switch on to activate the fixture.

Take apart the mounting screws (#17) and Mounting Plate (#13) from the Canopy(#1),

attach the Mounting plate (#13) to the Outlet Box (#18) with the two Outlet Box

Screws (#16) as shown. The side of the Mounting Plate (#13) marked “GND” must face out.

Connect the white wire from the fixture to the white wire from the Outlet Box (#18),

3.After wires are connected, tuck them carefully into the outlet box, place the Canopy(#1)

over the Mounting Plate (#13), install the Mounting Screws (#17) onto the Mounting

Plate (#13) until fixture is secured to the ceiling.

Page 7

INSTALLATION:

18. Outlet Box

Ground Wire

Black Wire

15. Wire Connector

White Wire

14. Ground Screw

16. Outlet Box Screw

1. Canopy

17. Mounting Screw

13. Mounting Plate

Page 8

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightl y dampened clean cloth (use

clean water, never a solvent) to wipe the glass and surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning of f

the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly

dampened clean cloth (us e clean water, never a solvent) to wipe the inside glass and

interior surface of the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry

soft cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a

period of fi ve (5) years fro m date of purchase. This warra nty applies only to th e original consumer

purchaser and only to products us ed in normal use and service. If this product is found to be de fective, the

manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the

manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident,

modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is found

to have been improperly installed, set-up, or use d in any way not in accordance with the instructions

supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident,

misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material

or workmanship. This warranty shall not apply to the finish on any portion of th e product, such a s surface

and/or weathering, as this is considered normal wear and tear.

The manufacturer does not warrant and specially disclaims any warranty, whether express or implied,

of fitness for a particular purpose, other than the warranty contained herein. The manufacturer

specifically disclaims any liability and shall not be liable for any consequential or incidental loss or

damage, including but not limited to any labor / expense costs involved in the replacement or repair of

said product.

Possible Cause Corrective Action

1. Bulb is burned out. 1. Replace light bulb.

2. Power is off. 2. Make sure power

supply is on.

3. Faulty wire connection. 3. Check wiring.

Bulb will not light.

4. Faulty switch. 4. Test or replace switch.

Fuse blows or circuit

breaker trips when light

is turned on.

Crossed wires or power wire

is grounding out.

Check wire connections.

Page is loading ...

Hampton Bay 17267 Operating instructions

Brand: Hampton Bay

Model: 17267

Type: Operating instructions

It uses two 100-watt maximum bulbs, so it will provide plenty of light for your room.
It has a traditional design that will complement any décor.
It is easy to assemble and install, so you can get it up and running quickly.
It is made from high-quality materials, so it will last for years to come.

Download PDF

report